Busted Knuckle Bronco Prerunner Interior Upgrades - Knucklehead Garage

[@cottonhiker]

I live in California and watch EVERY video you post!!! Just want to say THANK YOU for all the awesome content!!!🙏👍🏻👊🏻🔥

[@BustedKnuckleVideo]

Awesome! Thank you!

[@cottonhiker]

@@BustedKnuckleVideo 🙏

[@diabeticdan1723]

If you didn't figure this out yet, I had the same issue with mine FWIW. Just a prerunner project that only goes out once a year. After 2 years, I finally ruled it down to a TPS issue. I found the throttle body shaft blade for the throttle position was not clocked right. Even after drilling out the sensor mount holes on a new one, it was way off. First time I ever seen this issue. It ran great the first few years I took it out. Replaced the throttle body with another I had, checked and set TPS, and all is good. Awesome build, BTW

[@BustedKnuckleVideo]

Injectors were clogged

[@diabeticdan1723]

@@BustedKnuckleVideo wow. That's usually due to never having a filter changed and it broke. Or it sat forever with old fuel. I've had a few injectors go bad. Atleast it's an easy repair. Looking forward to the next video of it.

[@daviddrennan1759]

Cool vids man i have an 88 and am doing a full modded restoration.

[@BustedKnuckleVideo]

Right on

[@daviddrennan1759]

@@exaviermcnair7252 my motor is on hold cause we are having trouble getting heads. Dss is so far behind they couldn't quote me a price, brodex took the money and ran and afr too is delayed. Ran some of the tubing and cut most of the interior out.

[@99unclebob]

SWEET ,SWEET UNIT , you guys don't build , you create cool vehicles

[@BustedKnuckleVideo]

Thanks this has been a fun project. Now it just needs an LS

[@Dutch1951x]

Sweet console setup!

[@BustedKnuckleVideo]

Makes it look like a race truck for sure

[@pranays]

I've own an 89 and the stock top was textured from the factory. It looks fine a little more texture but still good

[@BustedKnuckleVideo]

I think it turned out great. stuff is tough too! Hopefully we have a major update for this build soon!

[@tjfast55]

Slick bronco. OJ Would proud 🤣

[@BustedKnuckleVideo]

He might could have gotten away in this one. Well if it was LS swapped maybe

[@obsjpo]

So freaking sick! I have a 96 Bronco with the Solo Stage 4 kit and am looking at making a lot of the upgrades you did! My BIGGEST problem has been trying to find light mounts for the 57" gravity light bar. Your link was for the 50" but I counted 9 lights and want to confirm you used the 57 inch. Also, is there ANY WAY for me to buy the same mounts you have???

[@BustedKnuckleVideo]

We custom made the mounts. They weren’t too bad but not something we make for customers

[@lastcovenant3472]

So....keeping the factory speakers....👍...lol..Naahhh...Y'all doing one hell of a Job.😉

[@BustedKnuckleVideo]

Speakers? We will just listen to the LS

[@byronsmith25]

Yeah... I noticed that in the video. No plans as of yet to do anything with the stereo. May just do some race headsets from Rugged with Bluetooth for music!

[@lastcovenant3472]

@@byronsmith25 Sounds like a plan..

[@pogo458]

Which way was the wind blowing? The white cars next door looked prime for a black shadow 😏

[@BustedKnuckleVideo]

East

[@johnbennett4362]

Hey Byron loved the video. How did you make such beautiful straight perfect cuts in the new console for the speaker, radio, And accessories? Thanks.

[@BustedKnuckleVideo]

lots of tape, measurements, and a dremel

[@mulletmansean2480]

Curious are y’all going to bring this project back I love it

[@BustedKnuckleVideo]

Yes it is currently getting a engine swap.

[@devyn4595]

hey for the 2 part primer did you get the gallon size or quart size. and same thing for the tuffcoat surface, what size can did you get for that as well. Im going to go that on my bronco.

[@BustedKnuckleVideo]

good question will have to look back

[@oreb7]

What brand is the small amber light bar in the grill? I love this Bronco series you are filming!

[@BustedKnuckleVideo]

KC

[@haydenbriggs]

Hey, is it possible to put the center console kit from Desolate in a 91 F150. How different is the 91 to 92 F150 interior, as far as dimensions go?

[@BustedKnuckleVideo]

should work. We have the same console in a Excursion

[@haydenbriggs]

@Busted Knuckle Films Awesome! Thank you, I love this build!

[@BustedKnuckleVideo]

We appreciate it!

[@kylewhite7230]

Y’all need to sell these light bar brackets for Broncos and f150

[@BustedKnuckleVideo]

$100 for the pair?

[@larryalexander4833]

Said you changed distributor . Check wiring from switch to distributor and voltage .Do a compression test on all the cylinders. And check the valves if not already ?

[@BustedKnuckleVideo]

Done done and done

[@larryalexander4833]

@@BustedKnuckleVideo lol

[@Epiphany0987]

Will you guys ever put the light bar mounts on the market ? I see a lot of good feed back about them.

[@BustedKnuckleVideo]

No these were just one off

[@GAMINGOBRIEN69]

Should try airless tires, I heard they were better for offroading because the way it can bend around rocks and stuff, I really want you to test them against normal stickies

[@BustedKnuckleVideo]

if a company sent us a set we would give them a try for sure!

[@TheButcheredGarage]

Ls swap is most certainly the way to go. No one will regret the fun factor, simplicity, cost, and channel content. DO IT !!

[@BustedKnuckleVideo]

Agreed!

[@anonymous-bk2dl]

Ls engines are fucking junk

[@rogerwatson3147]

Coyot!!

[@samschroeder25]

Great videos. How did you wire the kc lights in for the interiors. I’ve been trying to install these inside mine.

[@BustedKnuckleVideo]

we wired it into a switch on the new tuffy/desolate console

[@samschroeder25]

@@BustedKnuckleVideo good to know. Wasn’t sure if you were wiring it to where the bulb was coming out. Thanks!

[@jmb3101]

Do a compression test before yanking. I mean, are you getting a pulse signal at the coil from ecm, icm, and distributor?

[@BustedKnuckleVideo]

Already did compression test and everything looked fine.

[@byronsmith25]

Yes on the pulse signal. Every spark plug is firing. It will actually run injecting starting fluid into the intake.

[@mimpcinco135]

Wow thats awesome

[@BustedKnuckleVideo]

be more awesome with a new engine in it and running! LOL

[@krygerm]

Dont ls swap the Bronco, Gotta keep a Ford motor in the Ford.. use a 5.4 lightning motor or a 6.2 raptor motor instead lol it is the braptor after all, or a Ford 7.3 godzilla motor..

[@BustedKnuckleVideo]

LS it is! HA

[@rogerwatson3147]

Coyote!!

[@krygerm]

@@rogerwatson3147 5.0 Coyote would be sick too, Was also thinking a 5.2L Voodoo crate engine would be sick. The sound that motor makes with that flat-plane crank is gnarly

[@UncleRayRayGarageEmporium]

My wife said that was 9.5 - 10 inches headroom.

[@BustedKnuckleVideo]

atleast HA

[@gatekeeperoffroad4252]

Something you should check is cats I saw in the shop same issue the customer thought blown motor just something to check

[@BustedKnuckleVideo]

interesting

[@byronsmith25]

No cats

[@lukewalker1116]

did you shut off the security when you did your tune? on a chevy i swapped i did hp tuners and after two months found out i had to change a crank sensor number value from zero to a one. id recheck that junk before yanking the motor.

[@BustedKnuckleVideo]

these had security?

[@byronsmith25]

I am a little curious about this question. It does have a factory keyless entry with some type of security. Not sure if it has a fuel or spark interrupt, though. Great question!

[@byronsmith25]

Just looked it up. Looks like the security system would have had a starter interrupt, which wouldn't have allowed the starter to turn over. We were able to get that to happen.

[@Mike-xn1bh]

Where can I buy the front Bronco seat brackets you used? Also is that a vinyl floor liner, if so where can I get it? Thank you

[@BustedKnuckleVideo]

Solo motorsports for the brackets

[@Mike-xn1bh]

@@BustedKnuckleVideo Where did you get the vinyl floor liner? I’ve been looking for something in tan to match my desert tan paint.

[@jefferykillian5367]

Dang clogged 2 one time we’re doing a blueprint and balance 408 in my 89 with the Holley Sniper kit fuel injection ignition and all now then on to suspension something I don’t know a ton about

[@BustedKnuckleVideo]

This one might just need an LS

[@babyjeffrey3061]

I love this

[@BustedKnuckleVideo]

it has been such a fun build

[@shamrockfitness6509]

Who makes the bracket for the KC lights. Looks perfect

[@BustedKnuckleVideo]

we custom built it

[@shaukeki]

i can't find the previous video

[@BustedKnuckleVideo]

kzbin.info/www/bejne/eGLdeWmXiqZ3ipo

[@micahhaislett3792]

Man I want to do the prp seats in my jkur front and back buckets

[@BustedKnuckleVideo]

You and me both!

[@danielkatairoak4015]

Did you set it to wumbo

[@BustedKnuckleVideo]

wumbo?

[@jefferykillian5367]

Probably the module on distributor or fire wall I have 3 kinda partial to them lol

[@BustedKnuckleVideo]

nope wound up being clogged injectors

[@gregc2069]

Can u send me link to the console and adapter to purchase

[@BustedKnuckleVideo]

desolatemotorsports.com/shop/fabrication/desolate-motorsports-diy-center-console-kit-for-92-96-bronco-f-series-trucks/

[@broncooverland2552]

What light bar from KC is that?

[@BustedKnuckleVideo]

Pro 6

[@zachattack745]

Great build! Are you going to use the stock rear interior panels or make custom ones? Good luck with the engine!

[@BustedKnuckleVideo]

just delete them

[@mustangGT500boy]

What seat bracket adapters did you use?

[@BustedKnuckleVideo]

I believe they were Solo

[@agar4278]

Godzilla!!

[@BustedKnuckleVideo]

7.3?

[@agar4278]

@@BustedKnuckleVideo Yes sir!! LS swap is like drinking Pepsi out of a Coke bottle!

[@brandonfenstermaker2375]

Did these trucks have the little red impact button under the glove box?

[@BustedKnuckleVideo]

I'm not familiar with that.

[@brandonfenstermaker2375]

@@BustedKnuckleVideo some of the fords had an impact switch under the dash behind the glove box that wouldn’t allow them to start, i’m not real familiar with it but I’ve seen it and some of the earlier EFI models

[@byronsmith25]

@@brandonfenstermaker2375 Yes, they do have the impact fuel switch. But that only cuts off the fuel pump (from my knowledge). Fuel pump is running and it is getting into the cylinders. We actually checked 5 injectors with a noid light. Only 5, because the other two are buried under the intake.

[@josepolitron8754]

Any plans on selling those light bar brackets?

[@BustedKnuckleVideo]

no they were one off

[@gearhead556]

What’s the width of the seats? Standers or wide width?

[@BustedKnuckleVideo]

standard

[@hungryorphan7711]

Have you tried checking spark and compression

[@byronsmith25]

Yes. Spark on all 8 and good compression. Actually can somewhat run on starting fluid

[@BustedKnuckleVideo]

gremlins...

[@DavidGutierrez-yk6hw]

Check fuel relays

[@foxtireautofoxcarandtrucks8760]

What a parts changer you are but I like your style. I am a diagnostic tech let me know if you need some brains to go with your style Fox Tire And Auto Northridge CA

[@BustedKnuckleVideo]

LS swap it is!

[@silentjde]

Check the computer for blown capacitors, common issue

[@BustedKnuckleVideo]

we put a new computer in it and still the same

[@trubkir]

I had a jeep once that I probably spent $1500-$2000 dollars on parts and investigation for a stalling problem. Turned out to be a bad ground to the frame. $5 at most to fix.

[@BustedKnuckleVideo]

we checked grounds too

[@ryansnider4220]

Who did the rear cage ?

[@BustedKnuckleVideo]

Desolate Motorsports

[@davedonedis]

No front part to the cage? So it’s just a roll bar?

[@BustedKnuckleVideo]

sport cage. It will save your life

[@davedonedis]

Oh, you are going to add a sport cage like they sell for Jeep’s that adds the A-pillar bars and the rest of the cage to cover the driver. 👍

[@jeffwilliamson7831]

Is the motor carbureted or fuel jectors

[@BustedKnuckleVideo]

It was the Fuel Injectors! Good Call!

[@jeffwilliamson7831]

@@BustedKnuckleVideo I was just wondering if it was carbureted cuz the carburetors have problems too with the paper filter from Ford factory

[@BustedKnuckleVideo]

No we swapped it to the newer fuel injection setup from Fiveology

[@jeffwilliamson7831]

Yeah I like watching your videos and stuff they're pretty cool with the big boy toys

[@stangm33]

Check the throttle body senor

[@BustedKnuckleVideo]

it was clogged injectors

[@Aint1S]

On the next episode of DEATH WISH... Man drives stock Ford Bronco across the "county!" Will he make it?! Nothing wrong with a Ford, I have one in my yard too! K5 Blazer with LS1 in the garage... 🤣 (It keeps the grass under control, one busted Ford at a time! Eventually, you wouldn't have to cut the grass again... if you only drove Fords.)

[@BustedKnuckleVideo]

LS swap will take care of it

[@Aint1S]

@@BustedKnuckleVideo Yes Sir, that'll fix right up! It really is a shame that Ford's answer to GM was burying the plugs beneath the heads and making horrible choices for "modular" motors.

[@anonymous-bk2dl]

@@BustedKnuckleVideo ls engines are fucking junk lol. Anyone who thinks otherwise is a moron.

[@rogerwatson3147]

Coyote!!

[@brianbirc]

LS ina K5 i get but in a Bronco? why?

[@freedomworx]

LS Swap it for the HATERS!!!!

[@BustedKnuckleVideo]

YES!

[@thekylewaters]

Yes LS swap for the win. #lsswapeverthing

[@BustedKnuckleVideo]

YES!

[@anonymous-bk2dl]

Ls engines are fucking junk

[@mulletmansean2480]

She still getting that engine swap?

[@BustedKnuckleVideo]

Yep already done just fixing some tuning and transmission issues

[@mulletmansean2480]

@@BustedKnuckleVideo hell yeah man can’t wait to see this thing back

[@BustedKnuckleVideo]

We will try and do an update once everything is dialed

[@joshreese1721]

Check the computer, I know there are a few caps that blow and causes it not to run.

[@BustedKnuckleVideo]

it was clogged injectors

[@davidlockwoood735]

what did you use for the floor

[@byronsmith25]

Just a vinyl replacement floor. I can't remember the manufacturer, but you can get them online all day long. Requires some trimming, but pretty easy to install.

[@BustedKnuckleVideo]

it is so quiet in there now!

[@davidlockwoood735]

@@byronsmith25 Thank you im building a rock buggy out of a cherokee and the metal floor is kindve ugly

[@Mike-xn1bh]

I too am looking for the exact brand because I’m looking for the same color vinyl. Anyone know who makes it?

[@victorjordan8438]

When the bouncer videos coming out

[@BustedKnuckleVideo]

patience

[@winstoncryer7606]

Wiring under the dash

[@BustedKnuckleVideo]

something funky is going on for sure

[@dannycrayton725]

Stuff and dart 427 in it

[@BustedKnuckleVideo]

if money was no option....

[@dannycrayton725]

@@BustedKnuckleVideo I built one for just under 13k

[@BustedKnuckleVideo]

LS motor is 1300......

[@dannycrayton725]

@@BustedKnuckleVideo that will work too!

[@jns66jns]

Please for the love of God don't LS swap that thing! That is sooo played out at this point, that is a great engine, just rebuild it!

[@BustedKnuckleVideo]

TOO LATE! HA

[@jns66jns]

@@BustedKnuckleVideo as a bronco guy, I am disappointed! lol

[@DadPool_Hyde]

LS swap on bronco? that's a mortal sin....

[@BustedKnuckleVideo]

That’ll get the Ford purists talking for sure

[@DadPool_Hyde]

@@BustedKnuckleVideo not a ford purist, but definitely a bronco purist...unless you wanna go batshit crazy and do something like a VR38DETT swap on it ;)

[@joereyes5154]

Great video till the last second smh

[@BustedKnuckleVideo]

not liking the LS swap comment?

[@joereyes5154]

@@BustedKnuckleVideo nope. I'm sure you guy's don't have emissions like out here in CA. Just build up the o.e engine. Be different be unique 😁

[@BustedKnuckleVideo]

Ls just makes sense

[@brentsimons3991]

Coyote swap it!

[@BustedKnuckleVideo]

for double the cost of LS swap....

[@KaiserBruh]

@@BustedKnuckleVideo says the dude thats spent 25k on it lol

[@anonymous-bk2dl]

@@BustedKnuckleVideo not even close. You gotta factor in rebuilding the ls every month. That adds up quick. Coyote is the smart choice.

[@jefferykillian5367]

Leave the Ford engine

[@BustedKnuckleVideo]

the one that doesn't run? lol

[@Mike-xn1bh]

@@BustedKnuckleVideo Put a 460BBF in

[@jeremiahlinton9582]

You put an LS in that FORD BRONCO and you will lose a subscriber.....Put a svo winsor or a coyote in it!!

[@BustedKnuckleVideo]

K bye ✌️

[@pranays]

Godzilla

[@BustedKnuckleVideo]

Big money

[@johnbennett4362]

Hey Byron loved the video. How did you make such beautiful straight perfect cuts in the new console for the speaker, radio, And accessories? Thanks.

[@BustedKnuckleVideo]

Tape, a lot of measuring, and a dremel