But It’s A New Elevator

  Рет қаралды 3,507

MQ Elevators

MQ Elevators

Күн бұрын

Пікірлер: 28
@mikepugs95
@mikepugs95 3 жыл бұрын
New controller and machines. Keep the door equipment to save money? Sounds familiar
@deathless12345678
@deathless12345678 3 жыл бұрын
Mod guy here. I always think of the maintenance guys when i set up the car top. That inspection box fits nice on the handrail with a lil L bracket
@MQElevators
@MQElevators 3 жыл бұрын
👏
@Mpx220
@Mpx220 3 жыл бұрын
You can use Hoistway access at the terminal floors or use a stick (lol) to prop the Otis restrictor halfway to clear the plate
@MQElevators
@MQElevators 3 жыл бұрын
I thought of the stick trick driving home lol 😂
@gliese909
@gliese909 3 жыл бұрын
Did you put a meter on the contacts to check for continuity? Did you also insure the shaft access key is wired correctly since it's a terminal landing (and the in-cabin access ins. switch too)?
@MQElevators
@MQElevators 3 жыл бұрын
I did not. It’s been running without door locks issues since I cleaned it
@baelevatorsmore728
@baelevatorsmore728 3 жыл бұрын
Man the whole “But it’s new” issue has got me today. We installed new self-checkout machines and activated them this morning and we’re already having issues. But man, not even a month and the Galaxy’s are having issues
@MQElevators
@MQElevators 3 жыл бұрын
Still on going lol
@jasonrucker3143
@jasonrucker3143 3 жыл бұрын
🤣 exactly, where am I supposed to sit! Maybe add a wrap to the spirator make sure hall door is closing nice and tight that last 1”. If the beak contact has excessive wear you can rotate it maybe get some life out of it that way. Let us know on IG as well ✌🏻
@unnmaed
@unnmaed 3 жыл бұрын
Are you serious about it?
@coaxgaming2547
@coaxgaming2547 7 ай бұрын
2:21 ~ 2:23, you appear to have found the elevator demon or smth (when you look in between the elevator gap of the cart)
@sallyrevenge2563
@sallyrevenge2563 3 жыл бұрын
Typically the restrictor on the gate can be pulled up into the non-restricting position. There should be a loop of wire rope to pull on, and a hook left of cartop to pull it.
@MQElevators
@MQElevators 3 жыл бұрын
That’s such a great idea
@6758nelson
@6758nelson 3 жыл бұрын
Door operator closing creep speed to slow or low voltage ground floor door lock. Or maybe door track dirty, the seems nice,good luck whit that one.
@joeynox
@joeynox 3 жыл бұрын
You guys should have modded the door equipment also. that otis stuff is terrible. those restrictors are like wings and if u get a broom stick it should fold back and by part. it will depend on car door to shaft door clearance but i normally use a stick.
@jarbo7818
@jarbo7818 3 жыл бұрын
We actually just put some car top box's on sideways so it's easier for service guy
@MQElevators
@MQElevators 3 жыл бұрын
That’s awesome 👏
@jdtayloruk
@jdtayloruk 3 жыл бұрын
Simple question, do you use door safety sensors and those door restrictors? I hope I’m not being silly, but is the door safety sensor working or switched on and not detecting anything. Im just wondering whether it’s the safety sensor stopping the door moving bing dirty or similar.
@MQElevators
@MQElevators 3 жыл бұрын
Do you mean the light rays?
@jdtayloruk
@jdtayloruk 3 жыл бұрын
@@MQElevators yes
@alexandrafreeman8135
@alexandrafreeman8135 3 жыл бұрын
I love the GUI on the monitor. Maybe they will do service apps too??!!
@andrewpagan4899
@andrewpagan4899 7 ай бұрын
Got a call once in a building with the same controller I was accompanied by the super to the motor room even though I’ve been to the building a million times I call them vultures anyway as I walk into the motor room the super asks me get it running tonight please I said yea no he asked why and I pointed to the waterfall coming down into the controller frying everything New mod car passed acceptance test 2 weeks before that happen I’d rather be in Canada then have to deal with NY supers One guy told me he thinks his elevator ran out of gas smh he was dead serious 😂
@philipcollins3849
@philipcollins3849 Жыл бұрын
Otis door lock
@cong1sena2
@cong1sena2 3 жыл бұрын
the Galaxy 4 is not as good as it is advertised, many design changes, that the new owners did and again they are NOT Elevator people. trust me I have been fixing and redesigning all sorts for problems with this system...no new locks thats bad, contact problems are going to pop up. also the new machines, are also vantage owned, so good luck,,,...
@MQElevators
@MQElevators 3 жыл бұрын
Already having the selector faults can’t be good, I’ll get to know it pretty good at this pace.
@deathless12345678
@deathless12345678 3 жыл бұрын
Get that door figured? Got a hail mary for yeah if not. Those old otis doors suck. Love the locks but the doors....meh
@MQElevators
@MQElevators 3 жыл бұрын
I actually did spend any time on it because they’re just gonna order a board, the other mechanic had already spoken to GAL I guess.
Interview with IUEC Elevator Constructors from TK Elevator, Austin
1:25
Three Problems
9:08
MQ Elevators
Рет қаралды 1,5 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
Unbelievable.
4:23
MQ Elevators
Рет қаралды 1,4 М.
INGENIOUS TOOLS YOU'LL WANT TO BUY
20:54
TechZone
Рет қаралды 11 М.
HOW TO REPAIR DOOR INTERLOCK OUTSIDE CAR OF ELEVATOR
1:35
Elevation Tech Vlog
Рет қаралды 376
Good To Be Back
10:16
MQ Elevators
Рет қаралды 2,7 М.
Think-PLC Run MyRobot Project!
16:23
THINK-PLC
Рет қаралды 155
CURSO MANUTENÇÃO DE ELEVADORES, MANUTENÇÃO PORTA DE PAVIMENTO WITTUR AUGUSTA
18:37
CANAL ELEVADOR ST Desenvolvimento Profissional
Рет қаралды 9 М.
Otis Hook Switch
6:44
MQ Elevators
Рет қаралды 1,8 М.
Service Calls
7:00
MQ Elevators
Рет қаралды 1,2 М.