Buying The Cheapest Diesel UTV I Could Find!

Buying a well used 2000 Kawasaki 2510 Diesel Mule and going over all of the pros/cons of the machine.
Follow us on Instagram: NKLandscapingLLC / nickhuott
Check us out at: NKLandscapingLLC.com

[@bigd3046]

I have a 2000 Mule 2510. Bought it new. I also have issues with the radiator fan switches. I also don't want to spend $120 per switch, so I just pulled the wires off the switch and connected them and then put a toggle switch for each fan. When I start the engine, I turn on the toggle switch for the front radiator fan. If it's really hot outside, upper 80's or 90's, I also turn on the toggle switch for the radiator fan under the seat. A little pain in the rear but saved $240! Just remember to turn them off when you shut off the engine as the circuit is always powered, so the fans will run even with the key off. I also had to do the head gasket a year ago. Other than replacing the drive belt a few times, it's been a very good unit.

[@NKLandscapingLLC]

Yeah those fan switches are very expensive! I like your idea of putting them on a switch. Maybe even put them on relay that only allows them to be powered while the key is on, but still on a switch. That would at least keep it from running the battery down if you forgot to turn the fan switch off.

[@jeffmayeux1692]

Nick, did you get a chance to change the head gasket yet? I think this purchase was good only because of two factors: the parts vehicle was included and your skills at repairing things. The good thing is the use you are getting with this vehicle.

[@NKLandscapingLLC]

Hey Jeff, unfortunately I have not had a chance to get the head gasket changed. I think I will leave that to a winter project. The machines runs great every single day despite the head gasket issue. We get A LOT of use out of the machine, so I agree that that is a huge positive outcome. I will eventually get the machine 100%!

[@savvy1803]

Good informational video for those purchasing older equipment or vehicles and 2 words that should remain in the back of everyone's mind while purchasing said equipment ... BUYER BEWARE . I believe you overpaid a bit but with your mechanical background it becomes a salvageable situation that will get you to where you want to go with this machine after the proper repairs are applied ... adios til next time .

[@NKLandscapingLLC]

Agreed! As with most of the used purchases I make, I tend to rush into buying things because I get excited. This purchase included! Luckily I have been able to use the Mule for months without issue and it has made my, and the company’s life much easier!

[@kurtflood8528]

The parts machine may have made it worth it, without that id say you got taken for a ride.

[@InTheDreamRealm]

Great video darling!!! 🌹🌹🌹

[@michaelbessette8531]

Nice tutorial on the machine….let’s just say, if you didn’t possess your diesel skill set - that may not have been such a good deal….with the other machine for parts - this will work. You have apparently gotten a great deal of use out of it so far.

[@NKLandscapingLLC]

I agree! If I wasn't mechanically inclined, this probably would have been a large headache. The parts machine has been a saving grace for me. Being able to have a stock of parts has been a huge help. Thanks for watching!

[@tomburdett6639]

I am interested in buying the parts machine. Has the front end of mine melted in a fire 🔥

[@NKLandscapingLLC]

I am holding on to the parts machine unfortunately. I have stripped so many parts off of the parts machine to keep my primary Mule going. It is definitely a great thing to have around for when you need some extra parts.

[@tomburdett6639]

@@NKLandscapingLLC okay I can appreciate that. Thanks for the reply back.👍

[@NKLandscapingLLC]

Of course! Keep an eye out on Facebook Marketplace or Craigslist. I occasionally see people near me listing parts machines for sale for a good price. It is invaluable to have a parts machine around to be able to steal parts off of. Good luck!

[@tomburdett6639]

@@NKLandscapingLLC yes unfortunately mine's starting to look more and more like one of those