Bypass AC Compressor on 2008 Dodge Nitro v6 3.7L

[@Tommytomatoes64]

Was about to replace coworkers compressor until I found no refrigerant in the system, did this trick for him and saved him $500. For Canadians NAPA has the same belt available [060825] worked perfect. Thanks!

[@douglasoakes63]

Thank you for posing this. My A/C froze up and broke the belt so I could go nowhere at all. This saved me a tow and compressor replacement and I could do the whole project in a parking lot.

[@mattferguson8742]

First off I'd like to say thanks for giving me the idea for a quick fix instead of buying a $375 compressor. The only thing I would add is that the coolant and windshield wiper reservoir have 3 additional screws not mentioned in this video. The are located underneath the reservoirs. Two of them are T20 torx and the other takes a 5/16 socket. We had to take the battery and air filter out to make it easier to get them. Other than that it worked great. Thanks again

[@DCxALBRECHT]

Thanks for feedback! Glad it helped!

[@gabrielmarin4910]

Just did this to my 09 nitro!! Bro you saved my life. My ac was messing up broken a belt and I bought a new one form the dealship for 80 bucks. It broken in 4 hrs and they couldn’t refund me. So I did this and it’s running as of right now!!

[@bigDwood]

Also works for 08-12 jeep liberty

[@harleydennis8768]

Bud you saved me so good just your drawing alone an measurements was all I needed till I can get the money to buy the compressor that I need I thank you very very much greatly thank you

[@DCxALBRECHT]

Glad to have helped out!

[@TheGregNeace]

Bro! Life saver video! AC seized solid at work, just removed the clutch and the pulley in the parking lot and ran the new belt. Whole project took 20 minutes, 18 of that was trying to squeeze that dame 82.5 over the alternator pulley #she'stight!

[@AzrailKain]

Thanks a million! Appreciate that you included belt part number in description. Huge help!

[@DCxALBRECHT]

You are welcome! I'm glad I helped somebody out and saved them some time from experimenting with a ton of belts!

[@edgarquispe4512]

This video really help me a lot i did it myself for the time ever me doing a mechanic work thank you so much i cant wait explain how happy i am j got a shitty day but this really make me feel better about myself thanks again🎉

[@DCxALBRECHT]

@@edgarquispe4512 that's awesome, glad it helped you out!

[@Emmanuel2249]

thanks for the vid, it just saved me from buying a complete compresor

[@DCxALBRECHT]

that's awesome man! glad it helped!

[@brennancasler]

Omg it worked! You don't even have to take the air compressor off. Although, you do have to take off the pulley.

[@bellimus]

08 Nitro 3.7 the pulley and clutch were bad and knocking(on the compressor). Used the Value craft belt 825k6 $30 seems to be working great. Spent 30 bucks. Hardest part is getting the belt back on, as I couldn't find my serpentine tool to get some torque. My compressor wasn't working anyway, and there was no refrigerant in the system, otherwise id definitely purge first. Thanks for the video

[@megaghostly1]

Thanks bro saved my life

[@tyleribbitson1734]

I have gone up as high as 83 1/8 trying this on my 2009 Liberty. Can't get close to pulling the belt over the alternator pulley. Thought?

[@ronaldharper5023]

Thank you very much

[@stevemitchell8631]

What was the length of the belt

[@brandonblake1363]

If I take the pulley and clutch off, will the belt still clear the compressor??? I believe my compressor is still good and I don't want to mess it up by taking it off completely especially if I can replace the clutch and pulley at a later date...

[@930dubn]

my 2 cents after being 4 hours from home today and the a.c. bearing going out... 82.5" - 6 rib serpentine belt. I was in a hurry so I did not remove the entire compressor, but simply the pulley and bearing. only took a 10mm socket and snap ring plier. I was not able to pull off the magnetic coil with my limited tools, but there was about 2mm of clearance from rubbing the belt. thanks to everyone online who posted the belt length.

[@billynyce1776]

Is this the length of the belt for the bypass of the Compressor??

[@chevybrother6945]

Just did it to a 2008 jeep liberty 3.7. So far so good. Used belt valucraft #825k6. Thank you so much for this video. Awesome

[@WillyGamboa-p4q]

That belt # was a life saver thanks alot

[@SuperRmanson]

Did you use a different belt

[@richardknack968]

This was a lifesaver! My compressor clutch bearings burned up and actually ruined the compressor itself from the heat. Thanks to this video I was able to bypass the compressor (after removing the ruined clutch assembly).

[@williamkemerling]

I have a 2008 dodge ram that I did this with - the 82.5 belt did not work so I used an 84" - runs with no squealing or noise

[@tyleribbitson1734]

Wonder why you and I appear to be the only ones who need to use a longer belt....

[@chazclemons4317]

Can I do this with the same size belt to a 2008 jeep liberty.. same motor 3.7 v6.

[@quantumfixits7574]

Very helpful vid Colt...thanks!

[@ryanswinney5026]

Colt Albrecht can you do the same thing to power steering pump and would the belt size be 82.5 also bypassing power steering!?

[@G.Truett]

Awesome video, saved me time and money thanks

[@mrbigd1959]

Does it work for a Jeep commander

[@abigailruiz1304]

What sizes of belt do I need for a 2007 Dodge Nitro 3.7L V6

[@gislam759]

Do you add the coolant tank back when you’re done?

[@anamarin6475]

Okay that was really cool I didn't know you could do that but, where's the white reservoir don't you need that still because radiator needs water engine needs the coolant???

[@g1visions]

Okay I'm kind of lost I'm not sure if you use your same original Belt or you went and bought a shorter belt. Because my original belt with that same diagram is still too big.

[@danieldccampos1187]

Will this work on a 2011 dodge nitro 3.7

[@razadodge2695]

thank you

[@ricardodeluna4589]

what size belt is he using to replace

[@wilkey40]

What is the Belt # that you used? The closest I have found is a NBH 25060819 for the 3.7 it is a 6 Rib 82.5 x 13/16 in but nut sure is the rib patter will match up

[@DragonPop64]

On detaching hoses and the pressure , how can I depressurize it without fancy tools. I just need to get it off. I doubt it's going to send the compressor flying into space.

[@VideoWorld123]

Loosen bolt to ac line and let out slowly

[@katiewolf6706]

What belt do you use for this

[@johnnysanchez9291]

Hello good video did you use the same size belt??

[@benhahn1334]

Worked great thanks

[@plezia22]

Does the water pump still spin the correct way?

[@bobbylowery363]

Is that the same standard size serpentine belt that was on before? If so how did you reroute it?

[@DCxALBRECHT]

Hey Bobby, no this was an 82.5" 6 rip serpentine belt bought from Advanced Auto. Diagram is included in the video description. Best of luck!

[@brandonwhit600]

What sz belt did you use?

[@DCxALBRECHT]

Brandon Abrams 82.5 inch belt

[@billynyce1776]

If you go to the part store.. The part number is #815k6.. It took me all of 10min... Thanks so much 4 the video

[@brandonwhit600]

The code would be on the belt?

[@RSDavis-hw9ho]

What parts store did you find the belt at? I'd rather not order it online.

[@prestonlock546]

i have tried three different belts ranging fromm 66" to the 82.5" belt on a 2007 dodge nitro with nooo luck wrong dude

[@MrBlack-cd1ot]

Preston Lock u need to follow the diagram he has for the belt if you dont route this specific way the belt will be to long. worked perfect on my 2007 dodge nitro 3.7

[@evilclown13jz23]

I have a 2008 Jeep Liberty, can I assume this would be compatible?

[@DCxALBRECHT]

Evilclown13 Jz sorry for late response, not sure with the Jeep 3.7l it may be worth a shot.

[@evilclown13jz23]

Tried it and it works. Thanks.

[@chazclemons4317]

Evilclown13 Jz did it work for your 2008 jeep liberty.. the 82.5 belt??

[@phildavisjr]

May be a dumb question. What exactly does this do. My AC went out (blowing hot air) in my 2007 Nitro and I was told I need a new compressor. Will this allow it to work and blow cool air?

[@DCxALBRECHT]

P Davis this allows you to bypass an AC compressor in your vehicle. No AC compressor = no AC

[@DCxALBRECHT]

P Davis buying a new AC compressor and using it to replace your broken one will potentially allow your vehicle to blow cold air again. Be sure to get your AC lines charged or pressurized with freon from a professional.

[@shantellishere7751]

P Davis mine too

[@sunnyd6359]

Hi Colt. Can this been done on a 2007 Dodge Nitro SLT v6 3.7L??? I know sometimes things change from one yr to another. :(

[@DCxALBRECHT]

Carol H I cannot give you a direct answer but I feel the layout of the 3.7l engine from 2007 is the same as 2008.

[@sunnyd6359]

Perfect Colt. I'll make sure first. I take it this is the less expensive way in comparison to replacing the compressor and the condenser? Much less??Replacing these 2 things is around $500. in parts. Than labour on top.

[@DCxALBRECHT]

Carol H yes it is an affordable method to bypass the AC compressor. I still have my belt running strong and it's been close to a year since I put it on.

[@obinnaejiofor8468]

@@DCxALBRECHT what was the belt size

[@obinnaejiofor8468]

Without a/c

[@paulelliott3669]

Will this work on 2007 nitro?

[@DCxALBRECHT]

if the nitro is a v6 3.7L it will most likely work

[@bluejbird1223]

thnx

[@brandonwhit600]

I tried 5 belts duralast uses part numbers like 740k6

[@DCxALBRECHT]

Brandon Abrams 825kx where x equals something. My guess would be the ribs or width

[@DCxALBRECHT]

Brandon Abrams try this m.autozone.com/cooling-heating-and-climate-control/belt/duralast-serpentine-belt/579126_0_23387/

[@lekanjalastreeter4948]

Colt Albrecht. can i bypass my compressor on a 2004 trailblzaer

[@robertlewis9290]

Having a hell of a time getting this new 82.5 Belt on 🤬

[@DCxALBRECHT]

I remember your pain!

[@robertlewis9290]

@@DCxALBRECHT looks like it went on like butter for you! Lol I've tried it several different ways and have made sure my routing is correct multiple times, any tips to get that sucker on there?

[@bluejbird1223]

when you delete the comresser dolid you buy a smaller belt

[@DCxALBRECHT]

Yes a smaller belt was installed. 6 rib 82.5 inch