C/10 ENGINE IS ALMOST READY! And PROGRESS ON BILLY’S SMALL BLOCK!

[@RyanSampsonRPh]

Some people may not realize this but what and how you film is so well planned out, yet genuine and spontaneous. Actually pretty hard to do, but you pull it off!👌

[@theoldmansgarage]

Very. Thank you

[@gyrodaniel8223]

Agree 100%

[@lochnessfox3441]

@@theoldmansgarage I also agree totally

[@Loki13M]

@@theoldmansgarage That natural speaking ability I mentioned, much like Ron Reagan's except a bit more relaxed and casual. Though when ya start in on the politics I can hear that fire too. =)

[@kylelympus6578]

Agreed, when it is real like you folks film it, so much more is felt from the viewers. Thanks for keeping it real. The Waltons of Street Racing. 😎

[@RedEyedPatriot]

The way you appreciate him for working so hard and called him tigger bear made me cry man...my Dads been gone since August of 2014. That shit just pulled my heart strings man 😂😭 my mom's sick and not to far away. It's like watching the most beautiful flower wilt away. Hard asf

[@matthewwallace2981]

🙏 for you my man my dad passed away day before Thanksgiving 3yrs ago still not any easier but we gotta keep pushing on.

[@sabre-ub3op]

Damn bro you brought tears to my eyes....

[@1982MCI]

@@matthewwallace2981 never does get any easier Mathew, never does brother! But somehow, we learn to cope with it a bit and accept it a bit and we tend to not think about them quite as much but when we find our little keys that unlock those memories then holy hell, watch out and stand clear boys!! Sometimes you’ll be able to control the emotions those keys unlock but sometimes you can’t control it and just let everything go!! It’s ok to admit, we’re all fricken human and it happens to all of us unfortunately and if it hasn’t happened to you yet, it will, and then you’ll understand what I’m talking about! Fortunately and unfortunately, these videos are always full of those damn keys 🔑 but that’s one of the things I love about this channel so much!

[@obezzyjohnson9680]

Yes I feel u bro bcuz I lost both my parents already n this really hit a soft spot in my ❤️ seeing this n how well the fam works together. I remember how my dad n I both use to work together like y'all n miss it so much

[@RedEyedPatriot]

@@obezzyjohnson9680 Keep your head up chest out forever moving forward cause God gives his hardest battles to his strongest warriors. I love this family.

[@omni057]

You were born to do this, I swear. The SRC family makes the best content on KZbin, in my opinion. Keep it up! I appreciate you trying to find balance and to not exhaust yourself trying to push out content as quickly as possible. I'll gladly be patient and wait for the videos and I'm sure others feel the same!

[@theoldmansgarage]

Thank you

[@nickjustus4726]

you got that right i was hooked from the first video of src then i found out about src garage when billy asked if ppl wanted more in the shop videos to go subscribe to his dads channel glad i did cuz ive been watchin all the videos over and over something about the src family makes me wish my family was more like them much love for everything they do.

[@markshaw3219]

I would be twice as broke if I lived that close to Jegs!! Just say'n...

[@TETANUS-kx1nj]

Billy needs to make an RC car look like his S 10. 👍👍👍🏁🏁🏁🏁😎🇨🇦🇨🇦🇨🇦🇨🇦

[@obezzyjohnson9680]

Factz that shiiii would be 🔥 asf n I might have to try ityself bcuz I own a few RC cars myself. I have got rid of a few of them thou

[@TETANUS-kx1nj]

@@obezzyjohnson9680 sweet , check out what we do up here in Ontario Canada, drag racing and more, on my channel, thanks I appreciate it

[@bncm7553]

I love Vicki!!! Thank you for including her in every video. I watch along with my husband and look forward to see her. My husband and I are the same age as you two and a lot of your interaction with one another makes giggle becuz it reminds me of my husband and I . Your family is awesome and we love watching.

[@momhoskinson2813]

Thank you 😊

[@mychaleporter6806]

Family fun n family love...u guyz are such a pleasure and a treasure to enjoy watching. Be happy 2 see Billy's S-10 up and Turbo Tigger's as well...keep it come family!!!

[@hurcovmx426]

I really enjoy when you.... for lack of better words interview your sons and ask them questions... And to listen to their point of view..

[@gyrodaniel8223]

Somebody just keeps getting better and better at editing content..... it's beginning to look alot like a sitcom!!!! I love it you guys are really something else. This has went so far beyond racing. Your content is so relatable.... Bill you have so many talents thanks for all your hard work brother........

[@LucoreAuto]

Big things big things! Can't wait to hear that Minnesota Monster fire up in Billy's truck now that Bob has worked some magic on it, that'll definitely bring a smile over here. Very very glad to see these suspension upgrades on Molly's Mustang also, with all that new found power she definitely needed a suspension setup to handle it. We'll be standing by for assistance when necessary :)

[@steveashworth6707]

Tiger bear has a great engine thanks to Dad, Billy, and Molly!. Its nice to be loved!, along with good morals and ethics, and some good old serious fun!.

[@chuckdaly3164]

Popa gotta proud‼️‼️your Family is and should be a example of America’s Best‼️‼️😎 always a pleasure to witch! And you all keep gettin Better‼️‼️🤙🏻😎 from the beach😉🏄‍♂️

[@waynehall419]

Thank you guys so much for EVERYTHING that you do, not only for your own family but little do you know, you keep my mind occupied cuz god knows things at home right now are not the greatest so THANK YOU for being pretty much my rock for the past months or years. Keep striving for better things in life is what I live by these days so thanks for the inspirations and all that you offer.

[@dong3471]

I cant tell how much I look forward to the videos my son and I sit back and watch just like it was a tv show.

[@jerryfrederick6610]

It is a tv show 'It Is Our Tv Show" I totally agree about the anticipation part, I watch this channel more than regular tv. The content is just spot on for my interest and I am a Ford guy (Thank Molly) but, it is the real reality of the content that draws us. Take Care and God Bless

[@jurisklavins2578]

Years ago, there were only photos and maybe 8 mm silent home movies to record family history - now in the KZbin era, we have high quality videos to enjoy - not only can a wide audience look in on others' journeys, but the Hoskinsons will have a video scrapbook of their family to treasure for many years to come - thank you and God bless! 😂

[@melissaslomoerobertson4765]

Thank you VIcki for the shoutout and sharing your family with all of us. We love watching this channel. We are getting closer to finishing my son's car and my car for some good ole drag racing. Keep up the great work Old Man!!

[@Pyle81]

Bill, looking at that shelving unit. I think the plastic one would hold Hoodies and T-Shirts better. And put the Monster Trucks on the nicer crome units, Just saying 😉 Glad to see stuff is coming together. Maybe hear some new engine noise soon??? Even Tommy's C-10 engine will suffice for the time being. Billy's engine needs to be a live event.

[@jamesnorris998]

Tommy reminds me of an older version of my son. Happy go lucky all around good kid. Jackson makes some of the same facial expressions.. We're currently restoring my old truck for him.. He's 11... Really enjoying this c10 series it reminds me of what we're doing.

[@KevinSmith-rk3ee]

Just some advice from an ebay seller. I have been selling hats for years I would ship the hats in a box instead of a poly mailer. Keeps them from getting smashed in transport.

[@quickdeuce]

@10:12,, YEAY! Let's go for a ride in the '55 Chevy!! Sitting back in my office type reclining chair, closing my eyes and listening, imagining I am in there with ya. Damn that sounds so sweet. In my minds eye, James Taylor's rowing thru the 4 rock crusher gears on a certain radius wheel well '55 with a pair of AFB's on a tunnel ram. Forever live 'Two Lane Blacktop'

[@stevemoxley9129]

Well Bill you done again great video. Yours is the first one I look at ever morning with my Breakfast . Molly's Mustang is coming a long really nice . I can't wait until you get all of the Trucks Running and Billy get's back to Racing again .God Bless your Family

[@big3fan916]

Spent 240 with Jegs last weekend instead of Summit because of SRC / SRC Garage

[@jerryfrederick6610]

And that is how it works!

[@aaronrepsher7628]

Another great video Bill!......man it has to be nice to be able to have all those great performance specialists shops so close and then on top of that have Jegs and Summit within driving distance right in your backyard!!! I'm super excited to see all these engines coming together and can't wait to see them run in each of them gems they are made for!!! Well you all have a great rest of your week and I'll be patiently waiting for the next update video!!

[@grandprix834bbl]

You could post a 30 minute video of you going threw the gears of 55 and I would keep it on repeat lol

[@jesseyjacobs9554]

Best content on KZbin old man. I enjoy all of your videos...ALL of them

[@jasonhastings5538]

Billy and molly gonna have to put out more videos!!!!!

[@joeyy9499]

Great video as always! The happiness that surrounds this channel and your family is amazing!

[@docshotrodnhobbies9019]

I was expecting a totally different reaction from the wife on the rc truck shelf🤣🤣

[@ksokie63]

C10 motor looks fine 🙂 thanks for sharing and update. Have a great evening 👍

[@TETANUS-kx1nj]

Sweet. Another great video my friend. Thanks. We appreciate you guys. 🏁😎🇨🇦🇨🇦🇨🇦

[@gradybaby8309]

the town is talking... here comes Bill with his camera again... lol... keep em coming sir....

[@jaystuard4336]

Another great video, been enjoying the daily videos! Thanks SRC family.

[@larryhendricks3896]

Can't wait to see everything up and running Bill. My 68 hit the shop earlier this week for brake work as well as fuel system upgrades. And power steering. I'm no longer sitting my butt at home because of the Covid and work out of town so i don't have enough time to finish up the drivetrain and have it out this summer. It's been a long road and like i've said since joining Billy's channel and then yours. Y'all kick started my focus on the car and it's about to payoff! I thank you and your family for the inspiration you've provided me over the last couple of years.

[@Man_in_the_moon_oahu]

Recommend doing a retorque after 15 to 20 minutes. I never believed in bolt stretch until working with a lab to diagnose

[@peggypatton9170]

Wow you made something beautiful out the truck shelf motor looking great be nice moms you guys get more cookies.

[@fyingace14]

These videos bring back so many memories of working on cars with my dad he past away last year and it's been so hard to keep going thanks for the great videos.

[@richardturk7162]

I wish there was a store like that around here. Glad to see Tigger receive some credit for working so hard.

[@theredfordfiles7095]

I need to buy a shirt just because tommy out did miss Vicky... that was funny as hell...lol🤣

[@stevenlaxton3618]

God damn this is better than a Friday...seeing an src video up 4 minutes after you post it..haha makes up for doing irrigation work in the rain yesterday lol thanks boys

[@jamesgrates7170]

Love you guys great family take some advice tell Molly to weld the axle tubes to the center section don’t learn the hard way like I did especially with a stick car god bless

[@rockindetroit7028]

Congratulations Old Man!!! You Broke over 50Gs in Subs!!! Well deserving you put a lot of work into your Channel!! Before you know it Billy’s gunna be lookin in his rear view mirror & you will be close to Subs as he has!! One because you have a lot more content than he has!!! So good luck on passing your sons channel cause I see it coming!! I know it’s not a competition but you are working 10x Harder on your channel!! You will be a 100Gs soon!! Keep working we love it!! Chap Detroit!!

[@biglon62]

Man I love y’all! Best content because it’s real folks living real lives!!

[@jrhalverson1280]

That '55 delivers the sound every time. Classic SBC!

[@dirtfan05]

Straight up I was about to ship you guys a brand new electronic Snap-on torque wrench in the morning... glad you guys got one. 👍🏼

[@karlmorrison7933]

50k subs!!! shows how great this channel is bill...

[@nojabjonny]

Cheeky 'chevy dog's backs down to June at the bed then when June's gone, sneaky bigger, I like his style.😎

[@williereed6418]

The smile on your face when it’s time to run errands in the 55 #priceless

[@daveweeks8325]

You should be able to swap the oring style fitting/valve out of the late model power steering pump and install the older inverted flare fitting/valve out of an older pump in its place. I did that on my 66 caprice when I installed a late model engine. Gotta love gm for keeping everything the same for half a century.

[@Peaserepairs]

For the power steering issue use a 1981-87 gear box it will bolt on to the frame and the high pressure power steering hose will bolt on fine.

[@rpkdarkragedemon863]

Much love and reand many blessings and prayers for y'all

[@sager916]

C10 coming along nice and the rc rack is perfect touch to the shipping area

[@jerryfrederick6610]

Hey for pulling a trailer with the C-10 wouldn't a vacuum secondary carb be a better option? This was a great video all the way through. I loved the shout out to the customers, that is a great personal connection to your fan base. Take Care and God Bless 50,000 + Subscriber SAUL-LOOOOOTE! (Think Hee Haw)

[@quickdeuce]

Hear, hear Melissa Robertson for sending Miss Vickie the cool 'giddywicket'!! :)

[@dwaynedawson8485]

Love watching your videos. Thanks for taking the time to make great videos

[@somethinglikeawelder4250]

I’m sure you are experienced in burning up spark plug wires on a sac w/ headers. But in case you need a “competition proven” idea. I use the cheap spark plug wire heat protectors that are usually big and loose. On the wires closest contact with header, when you slide the wire protector pinch and fold the excess and use stainless steal Zip ties to keep in in position. Then put another protection cover over the folded one to keep uniform look.

[@arthurfricchione8119]

Thanks for sharing the video guys. Heading to Ohio Saturday. That 55 is sweet. Just love that sound. Memories stay safe and well. Artie 🇺🇸🇺🇸🇺🇸

[@sk-zi9mw]

How many people on the planet can say " I'm gonna jump in the 55 and go to Jegs" #Blessed Motor looks amazing!

[@Rebelx251]

Ol man, make sure tommy and miss V get some more plus size shirts for my well fed southern family 💚🏁🇺🇸

[@jeffreybamford7365]

Why is it so hard to get shirts that fit .you never see 3xl or 4xl I haven't worn a medium in or large since I was fifteen . always waiting for stick to come in with my size everywhere is the same

[@jaronmccormack8057]

Love the hoodie billy is wearing. My shop truck is a slammed 68 gmc and the doors were hand painted and say "Shitbox Speed Shop"

[@darrenmc6956]

Kidna feels like the Dukes of Hazard. Just the good old boys never meaning no harm. While racing from the law. Great family time, good people, and good friends. The best things in life. We should all make more time for these things. Work hard play Harder.

[@rogerchevelle7231]

Great video Bill. Nice work on the C10 engine. Look forward to every new upload from you guys.👍

[@zacharybuendia8738]

Glad to see another. Hey guys let me know what's with the hats I ordered one but was refunded I want to make sure I can get 2 one for me and my son so I can finally wear my shirt. Let me know when their coming thanks guys

[@daddyshovel7995]

That intake you can tap little freeze plugs in them holes. Like the ones behind timing chain for oil passage for cam.

[@actionjackson6892]

Man..I loved this video for sho..little tree fiddly looking good fellas.

[@rickshults2697]

Weld the injector bungs up, drill and tap for direct port squirt kit!!

[@eric63377]

The bungs on the intake you should tap them to fogger injector size and then put a plug in each one with PTFE tape on them. So that way in the future if you want to put a fogger kit on it it's already typed and ready to go.

[@jasoncook9269]

Hello sir. Great job on the motor! I finally found one for my project. 350 with the camel hump. Going to have to make them work. I got to work a lot of overtime, going to get her all rebuilt. Trying to get at least 500 horse.? Ok well great video as always. Good night and GOD BLESS!

[@dwaynethayer7868]

Great to see the c-10 getting back together..

[@dodge-io7gd]

your wife is a sweet heart!! lucky man.

[@oldsranch]

Been to that Jegs store a bunch of times, and being on the border of the hood, you can see some hilarious stuff by just standing in the parking lot.

[@Michelegonz97]

I need the sparkly one too please Ms. Vicky!

[@larrylucas5731]

It's slowly coming around. The motor looks good...

[@mariobetancourt4429]

Would love to see Billy's old squarebody truck back on the road again with tommys c10!

[@mwhitelaw8569]

Bad ass day to roll the ole double nickel man. Thanks for the ride along All the best y'all And that foxbody needs some team Z torque boxes. She's gonna split the OE stuff with a stick car

[@dloneyv8]

Driving that 55 on a nice sunny day like that has to be therapeutic AF.

[@jeffreybamford7365]

Love how the whole family is benefiting from the SRC businesses awesome free enterprise ..

[@justing9538]

Your the man bill. Jegs should have fittings to convert that p/s stuff over to an fittings, makes life alot easier and you can route lines the way you want.

[@walterallen8600]

You check out the 187 Customs video about the inner cooler. In it Shawn talks about some ceramic plug wires he uses to protect his plug wires from header heat. He says he uses them on a couple of his vehicles now. Hope this helps.

[@v8g816]

Been waiting all day for a new video.

[@wymer999]

Instead of welding the intake and or getting a new one, you can always put in some dummy injectors to seal it up. If you can't find any available message me and I'll make you some, and that way if you decide to go efi down the road you're ready.

[@hannesviljoen641]

What would really impress miss Vicky ,is if you bought a real monster truck. I never heard a v8 sounding better than that 55. I can listen to that engine sound the whole day. God bless your family.

[@BobbySmith-ci5by]

Such good detail on everything y'all are doing 👍 love it 🙂

[@onementality9781]

Miss Vicky will be glad you built a shelf for more toys 😜

[@joecameron3406]

The projects are getting close to in and fire time can't wait. The monster shelf is cool

[@kevinschnepper8426]

Thank you for the ride in the badass 55

[@joshuarivera7622]

"They are chevy powered, so that's good". U can't ask for me. U guys are so lucky.

[@1fastlx]

Glad u got that rc stand. Now you can sneak in a new truck from time to time

[@Michelegonz97]

Oh the Mrs knows what your doin! LOL

[@richardogle7772]

I love this channel wish I could meet you guys I only live down the way from ya in Thornville

[@benscoggins3149]

take the fitting from the old pump and put in the later model pump i did this on a 72 c10 that i used gm serpintine on

[@RedEyedPatriot]

My Man 😎 Stepside Squarebody to the top shelf 🤘

[@robinwendt5527]

I love watching ur channel it's just relaxing plus I think I learn some things about 350s I basically just screw around with ls stuff and I'm no expert on those either

[@trentcostello5158]

Gotta love jegs!!! Summit screwed me on a return that was 100 when my total was 3800 so been a jegs man since 10yrs now not one problem! Not that I'm ordering more than once a year just saying

[@mikejackson4749]

I put freeze plugs in the injector holes of my intake. I put some loctite on them and they've been in there for about 4 years now.

[@ttamn92]

You would have to threat them NPT but if it were me if u have access to a lathe I'd make alum blanks to fill the holes then weld a beam around the tops ..just an idea

[@jasonsparshott7208]

Just swap to the late model hoses the fittings on the pump are different but the steering box is the same !

[@NoPrepFans]

Man I really do love you guys awesome content and it’s all 💯 good wholesome family stuff

[@j.j.clingman4083]

Hey Miss Kimmy I’m not sure exactly if you ever read SRC messages that people send them but I’ve been trying to find out the headers part number that they used for there C-10 build??? I built a 421 sbc with the AFR ALUMINUM heads that have the angled spark plugs and I can not find a set that will fit my 1969 Chevy 1Ton 4x4!! I’m running a manual tranny but I’m running a hydraulic clutch set up so the linkage will not be in the way!! I’m definitely needing a set that have a 1”3/4” tube inside diameter or bigger!! It can’t be that difficult but no one seems to no what I need!! Oh and they should be a long tube designed also!!! Thanks in advance & hopefully Miss Kimmy you get this message and can help me out???? I don’t think that SRC reads the comments??

[@DependableAutoTruck]

the more i watch your videos the more i enjoy so simple looks unplanned really good. did you see that shawns dad wrecked the 55 they had just built

[@theoldmansgarage]

I did. My heart goes out to them. His dad is such a nice person. Met him at the very first Street Outlaws No Prep at Bristol.

[@spuds7677]

1 minute in to the video and I am too in to RC cars, trucks and boats. I was 8 when I started to race and I have cars from the early 70s to new BLX Arrma. I have well over 30 cars and only 3 boats for now at least... I have 4 of those shelves full of them. MGT 8.0 is my all time fav, two fuel tanks and the Nova Race Head can't be beat... I always hear you need to sell those or these are in my way. They way I see it, they were here long before her and will be here long after...:-)