C_68 C program to Compare two Strings | with strcmp() and without strcmp() function

[@shivendra3019]

Syntax of first line in Jenny's lecture: "In the series of programming in C we had discussed (most recent topic name), Thank you very much mam, even village people can understand your quality lectures which helps us to become a digital citizen. # Jenny's lectures for life.

[@persiasprince]

Yeah so what's the problem in it if we put && operation and it will also reduce the time complexity If && condition not true then simply print "not equal" .

[@jayashreesahoo1027]

In the series of learning programming in c..... 😊

[@rickk3300]

11:39 it will return a negative value since the ASCII value of 'e' is smaller than that of 'i'.

[@CarolErva]

I'm transitioning to IT and I love your lessons, one of the few out there that I can really understand everything. Thank you for your great work, ma'am!

[@CodeNest_1703]

kzbin.info/www/bejne/nH-sqKadpLmcp9k

[@Md.MahinUddin-fi5gy]

22.4

[@kv5539]

@@CarolErva Did you transition?...How is the experience in IT?..I also wish to transit from electrical engineer to IT

[@boukefmohamed3191]

I couldn’t have done it without you ... So thanks ( from algeria ).

[@Gupatik]

Great Indian ppl have really conquered the programming world. respect!!

[@siddu2603]

shut up

[@vishu3766]

/*Compare two Strings*/ #include #include int main() { int value; char s1[] = "Hello"; char s2[] = "Hey"; value = strcmp(s1,s2); if (value == 0) { printf("Same"); } else { printf("Not same"); } printf(" %d",value); return 0; } output Not same -1

[@SpIdeR-MaN20M]

Thanks 🎉

[@indrajitmandal5985]

14:14 mam says :-"samajh rahe ho" Was 🥰🥰💕 First time Hindi sune mam Love from West Bengal, India ❣️❣️❣️

[@jeanrioux8750]

20:20 Using the condition with &&, if length of S1 < length of S2 and the first characters of S2 = S1, then the strings will be considered to be the same. Ex. S1 = "Me" and S2 = "Meat". The reason is that as soon as the Null character of S1 is encountered, the program will skip the loop, so the comparison with the remaining characters of S2 will not occur and the flag will never be changed to 1.

[@PriyankaSingh-ji2hf]

Thank you so much

[@codeanalysis7085]

ma'am i had some doubt on string comparison. but after saw this video , i easily understand this topic. thank you ma'am.

[@pratikmazumder544]

I am not student of computer science... But i watch your teaching videos.... Mathematics ka student hu... C progam k liye dekta hu

[@yashhokte1020]

20:28 No if we put && operator then it will never give correct output as the function of && operator is that if both the Condition is satisfied then only it will enter to its block but if in the second string if we found the null character in 2nd block only then it will not execute that block n so we can't use && operator :)

[@vijayroy3173]

Madam you’re rocking in internet

[@rickk3300]

Thank you ma'am for this amazing explanation....got the concept of comparing two strings very nicely..✌🏻✌🏻

[@PranathiBendalam]

11:35 negative value ,since ascii value of ''i'' is greater than that of ''e''

[@anju7334]

You cannot use && operator . You can examine it by taking string 1 = welcome String 2 = we. 👍

[@xEp1c]

good lecture, very informative

[@Learnandmotivation83]

Mam aaap bhot achha pdhati ho

[@limitess9539]

I think it gives 1 if the first non-matching letter in string is higher in first string, and -1 if the first non matching letter is smaller (obv in ASCII value)

[@Mohammadhaider-wd8wp]

Thanks a lot mam you have cleared my doubts regarding this string program.

[@i23i99]

12:00 for without strcmp

[@khushiagarwal7913]

Using && He and Hello will return same string value bcoz after 2 it will not run and flag cannot have the value of 1 since at last same value

[@subikshajegadish3525]

maam i loveeee your teaching so much pls pls plssssss do DAA and OS after completeing C

[@adetolasanni007]

I love your lesson. It is so helpful. I am subscribed to your channel now. Thank you

[@manly_meals]

char s1[]="Hello"; char s2[]="Hi"; it will give negative value (-4) because i comes after e , so i have greater sky value than e

[@cryptoumesh]

14:14 yes maam samjh rahe hai 🤓

[@jeanrioux8750]

11:40 it will return a negative value. ASCII value of 'e' is smaller than ASCII value of 'i'.

[@dudduramasujith3120]

You are to intelligent and very helpful to us

[@aftabhossain3839]

Thank you mam ...I am your first viewer

[@KiranKumar-db3rs]

I am in love with your awesome explanation

[@aadhil9270]

//comparing two strings #include #include Void main() { char s1[]="hello"; char s2[]="bye"; int result=strcmp(s1,s2); if(result==0) printf("strings are equal"); else printf("strings are not equal"); } Output: strings are not equal

[@nandachowdary7686]

1st view and 1st like, mam, good teaching

[@chaitanyaprabhu.0008]

Congratulations u won 🏅

[@gitanshagarwal7597]

On comparing string("Hello") and string("Hi") using strcmp() ,it will return negative value.

[@madhavisinha6350]

You are best mam😘😘😘😘

[@nawing2511]

2d array string with logical memory representation video mam !!

[@universedinesh7179]

it shows the same while applying && operator.

[@anjanisivarambonam9895]

madam please start python playlist from basic to advanced🤗🤗🤗

[@abhishekkumarmourya2022]

Yes mam

[@walkwithme_P62]

Yes ma'am

[@RashiChoubey-p6e]

Mam please explain many types of logic of programs

[@isoopal9357]

Ma'am please start python series basic to advance.

[@adithistar2189]

Yes ma'am please 🙏

[@adithistar2189]

And ur explanation is superb and interesting . I just want to say thank u very much 👍

[@AditiRai-vo5sd]

Thank you so much mam❤️

[@ananthnatrajan9861]

Hi Mam, i like your videos , and your way of teaching is so good. Regarding this program i'm using code blocks and Dev C++ IDE. for learning c. if i enter a String1 ANANTH and String2 Ananth, i'm getting the both the strings are equal.

[@yuvraj__technical9400]

Conceptual study thanks maam

[@mahig2934]

ma'am actually here you said that without using string.h header file you have done but some of the compilers asking string.h header file like gdb online compiler

[@RiteshSharma145]

Ma'am, you missed strncmp concept. Plz make a brief video on it.

[@RahulSharma-ke7wg]

Thnx For this mam🙂

[@taniyanegi7211]

Draw a flowchart to find the fibonacci series till term

[@ananthnatrajan9861]

Sorry mam i made a mistake. Now i'm getting correct output

[@tirthtanna7771]

by using logical and operater it will check both the conditions and as we can see that both the conditions are true so it will go further and if anyone condition is false then the program will be ended from the loop.

[@ParamitaDey-bi1mg]

I cannot understand why if we use and operator this program will not give desired output.. pls can you tell me..

[@tirthtanna7771]

@@ParamitaDey-bi1mg Because to apply and operater both the conditions should be true then and then the program will be further executed

[@ParamitaDey-bi1mg]

@@tirthtanna7771 See my question is if we use or operator then if one condition is true then it will go inside if loop . So if we take He instead of Hi in second string then second string will have string index 2(including null character )and first string index will have 5(including null character) so here for loop will go on till i=5 although there is no need to check up to 5 because at i=2 only we get null character in string 2. But as we are using or operator so if one condition is true (means S1[2]!='\0') then only it will go to if loop but it is not checking whether S2[2] is null character or not So is not and operator better than or oparetor? I don't know whether I can clear my doubt to you or not.. If you don't understand my question then pls say (" no I did not understand the question") or else I will wait for your reply

[@queennath1895]

@@ParamitaDey-bi1mg I have the same doubt too

[@ParamitaDey-bi1mg]

@@queennath1895 Did you got the ans?

[@sasanksasank1167]

Cp ki namaskaram 🙏🙏🙏🙏

[@18fatima15]

11:36 negative value will be returned

[@bloggermania]

11:43 it will return a negative value cuz i has greater ASCII value compare to e

[@soumyaprusti]

11:41 -ve

[@kishorea8872]

put more videos on string like , reverse the word ,remove given char,replace given char

[@khushiagarwal7913]

Ma'am isma && operator hona chahiye kyuki when i=2 S2 will end no need to check S1 after this

[@apputadhiyal9451]

Mujhe bhi yahi doubt aa rha tha but 25:31 p dekho ki agar flag ki value 1 ho tab not same kahega aur flag ki value 1 krne k liye loop k andar jana padega.

[@vinaypratap620]

Samjh rahe ho 😂😂😂👏👏

[@amitkumarsingh5032]

First viewer 😊

[@surajnegi1608]

Mam plz add some hindi words in between please please please i regularly watch ur vedio but sometimes english makes problem to understand❤❤❤❤

[@prathapreddyjanumpally461]

Waiting for java lecturers

[@RTBOSS]

Thank you ma'am

[@Ddot-cd1in]

11.39 it will return a nagative value

[@udsgyaan8464]

Maam i love you ❤

[@gopalgopi930]

Mam in this logic if the strings are : "hello" and " he" the code will return that the strings are same which is not true

[@bireswarsaha4881]

1.you should put '\0' instead of "\0" (or) 2.use || instead of &&

[@gopalgopi930]

@@bireswarsaha4881 that's what I meant.

[@dhineshkumars1991]

First thing in strcmp function is ,,if length of both string is not same we can very well say ,,string is not identical in our own function case

[@vinuthadc6505]

if you enter string 1 as" jenny kh" and string 2 as "jenny khatri", out put says "same".

[@goplay5936]

Same problem...this code has problem as when space is encountered flag is 0 so it is saying same

[@vickypatil5829]

Mam what it will give +ve or -ve when we give input as strl and strm

[@ankushsarkar685]

Since i is greater than e so, it will return negative value

[@aparnamane4899]

if we use && opr in loop then it not give correct o/p , if both cond is true then only it enter into loop, so better use or opr in for loop.

[@investmenttek8323]

maam is it nessessary to learn without strcmp() function??

[@Learnandmotivation83]

Mam ye cource compete hone ke bad data structure ke program ki list bna dena

[@Learnandmotivation83]

C language me

[@elavarasan_r154]

At 11:37 It gives negative value mam

[@isaacl.quelemine8775]

The condition will still be satisfy

[@manikantarajudhavala3543]

/* prgram for str cmp*/ #include #include #include main() { Char s[20], h[20]; Closer() ; Printf (" enter a string 1") ; gets(s) ; Printf (" enter a string 2") ; gets(h) ; If(strcmp(s, h) ==0) Puts(" two strings are identical") ; else Puts(" two strings are not identical“) } Out put:- Enter a string MANIKANTA Enter a string MANIKANTA two strings are identical MAAM CAN I WRITE THIS TYPE

[@pariveshsolasa4878]

right but in one statement u missed semi colon

[@debojitacharjee]

*WHERE DO WE USE IT?* - you have shown how to compare strings using for loop but you did show with a program where we need to use the strcmp() and what's it's application in software development.

[@marianesaliba2594]

Thank youuu

[@RiteshSharma145]

@11:35 -ve would be the answer

[@ashutoshpandey6510]

Hllo mam I new to your channel Can you please tell mee how to prepare for gate CSE branch What sources and book we have to do And how did you prepare As I want to to start And I am in 2nd sem of CSE

[@missankitabose1783]

Can you explain the code of permutations of string

[@Jyotiii007]

I'm getting error of "expected declaration or statement at the end of input"

[@harygaming.8805]

Mam is it necessary to take flag variable? Can we directly print ("not same" ); and the break;? Please reply I m get confused.

[@TamilSongs90sfavoritehits]

Then how will you check whether they both are same

[@shashank_kishore_]

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@enviesyy5294]

11.39 it will gives negative no.

[@tirthtanna7771]

it will return negative value

[@abdulrahimjalloh363]

Hello Hi It will return -ve. Because i ascii is greater than e ascii

[@archanakumarimeena3058]

Can we compare more than two strings also , how to do that?

[@aryanpandey2504]

ma'am i love you

[@ezaf001]

Mam just had a doubt- in if loop when flag turn to 1 u used break, will that break the if loop only ? and not the for loop and anyways once the flag is up output will be same, i am bit confused, maybe what i can saying doesn't make any sense, idk maybe their should be a condition outside the if loop that - if(flag==0) { break; }.

[@zenxdraken2418]

10:30

[@vishu3766]

-1

[@kanchanupadhye3648]

is it necessary to write break for for loop

[@shraddhapawar5674]

If possible start logic building course

[@hariparuchuru3858]

if we use && operator then the face following difficulties if we enter two string as s1 = har s2 = hari we know that entered strings are not same but when we use and operator it will say as they are same same in this case also if s1=hari s2=har it will only say not same when we enter two different character at start like s1=welcome s2=hari then the output will be not same so when we use && gate it in for loop it will not satisfy the condition for(i=0;s1[i]!='\0' && s2[i]!='\0'; i++) because in and gate even if one string reach null character firstly it will exit from the for loop then compiler wont check the remaining string which we had entered, without checking remaining string it will give output, which might true are false, sometimes correct sometime the output shown is wrong.

[@Ganesh_Gani799]

Mam plz upload python tutorials 🙏🙏🙏

[@shraddhapawar5674]

Please start data structure and algorithms

[@elavarasan_r154]

kzbin.info/aero/PLdo5W4Nhv31bbKJzrsKfMpo_grxuLl8LU

[@nirojbajracharya3051]

first

[@Sanjay-h6n-p1f]

Obviously negative👍

[@souviknandi5792]

guys ..in 5:58 time ..mam use a word something like ESCAPE or ESCAY...can you plz tell me what mam said..what is the meaning of that word?? I can't understand the word prpperly...so I can't find it's meaning in dictionary or GOOGLE.. plz help me!!!

[@aashishomre1624]

It is ASCII VALUE

[@souviknandi5792]

@@aashishomre1624 thank you sir...got it later in string part....thank you

[@sameeralikhan5133]

what will happen if first character of both char arrays are same??

[@TheSidharthClasses]

I love you

[@gammer978]

What is the use of flag

[@vikings.777]

16:11 if there is a chance of shot circuit ????

[@murakondamanasa552]

#include #include #include void main() { char s1[30],s2[30]; int l1,l2,i; printf(" enter a string: "); gets(s1); printf("enter another string: "); gets(s2); l1=strlen(s1); l2=strlen(s2); if(l1==l2) { for(i=0;i

[@RajeshKumarMinaBEE]

Mam how many lectures in this course