I have that welder. Do you think it would hold the weld for a long time for a moster step notch?
@peloteroopt7918 Жыл бұрын
I did a monster on my single cad with that same welder and its been on there for 2 years already
@Watchout5035. Жыл бұрын
I have that same truck with the same drop. And HD good and grille
@peloteroopt7918 Жыл бұрын
He'll yeah 💯💯💯
@1statik_v6562 жыл бұрын
What’s the lowest u can go in the back wit a c notch
@peloteroopt79182 жыл бұрын
6"
@J1_4712 жыл бұрын
8 is maximum. i don’t recommend more than that unless you got monster notch.
@joeroe28392 жыл бұрын
When u do a small notch like that never take off ur bed , the bed keeps the frame from warpin and keeps it nice and level also always have the spare off ..I do this for a living..also do u see where u cut since ur new to ur grinder in those areas use pivot points drill em in so theyll be rounded and not straight up like that ..makes the fame weak and can break w time and will sag making ur frame belly flop..other than that keep on trucking bro
@peloteroopt79182 жыл бұрын
Thanks for the pointer 💯💯💯
@naojwett9 ай бұрын
what y mean?
@chinchillamade2 жыл бұрын
I did mine without taking the bed out drilled some holes and nasty weld some of them, será que va a funcionar?
@peloteroopt79182 жыл бұрын
Simon tambien eso jala I just like to take the bed off for comfort 😴 lol
@SpwSkittle2 жыл бұрын
What happens when you leave it driving like that. I have a 4/6 drop I’m on 24s and is bumpy should I do it asap ??
@peloteroopt79182 жыл бұрын
Oh yeah you need it asap
@SpwSkittle2 жыл бұрын
@@peloteroopt7918 what c notch you recommend Becuase theres the ones you cut the bed and the one you made
@user-dd2gk8jx5i Жыл бұрын
Do I need a step notch if I’m on a 11inch drop in the back or can I go with a regular c notch?
@peloteroopt7918 Жыл бұрын
I would do a step notch for that 11
@CameronCThacker2 жыл бұрын
What settings are the welder on
@peloteroopt79182 жыл бұрын
I don't know 😅 that was a long time ago we up graded now 💯
@CameronCThacker2 жыл бұрын
I got the same welder 😂
@ozxxz2 жыл бұрын
you think i should buy that welder to weld a reklez underbed notch on mine? new yo welding lol. 😅
@peloteroopt79182 жыл бұрын
I would just buy a better brand 😁
@ozxxz2 жыл бұрын
@@peloteroopt7918 you think the titanium welder from harbor freight would be better? it has better controls and it’s like 60 bucks more
@SirGuidemere913 жыл бұрын
Those welds look good to me man. I don’t give a flux about perfection on a hidden part. Strength is all that matters lol.
@peloteroopt79183 жыл бұрын
Lol yeah its been a year already and welds still holding up 😁
@SirGuidemere913 жыл бұрын
@@peloteroopt7918 very nice. How are you enjoying the ride?
@peloteroopt79183 жыл бұрын
@@SirGuidemere91 very good
@callmeacid82452 жыл бұрын
Can you lift a truck that’s already been c notched. I bought mine c notched i just wanna lift it a lil more
@peloteroopt79182 жыл бұрын
Its should be good ma boy
@alejandroportillo89812 жыл бұрын
Good welds but for next time grind the paint off the c notch and the frame to have clean metal
@peloteroopt79182 жыл бұрын
We was new to all the that lol but thanks for the feed back and yeah I clean all the paint off I so a better prep 💯
@keaton_mcrae2 жыл бұрын
What part of arkansas yal from bro? I need my 19 silverado notched
@peloteroopt79182 жыл бұрын
Roger's Arkansas
@nspradmusic64532 жыл бұрын
Where in arkansas are yall located? I’m in conway bout to 4/6 my 05
@peloteroopt79182 жыл бұрын
Roger's Arkansas
@mariaalvarez42892 жыл бұрын
The frame didn’t bent??
@peloteroopt79182 жыл бұрын
Supplying it didn't
@Mac_with_the_lsx2 жыл бұрын
Ey you put the two metals together, didn’t blow through or undercut so you good man
@peloteroopt79182 жыл бұрын
Yeah 😁
@xusez96954 жыл бұрын
Bolt on notches arent bad but not recommended if you plan on hauling or towing
@peloteroopt79184 жыл бұрын
Yeah there not
@tamps21473 жыл бұрын
Hey bro do you need rear shock extenders for this 4/6 drop? Or do the shocks stay the same?
@peloteroopt79183 жыл бұрын
Its best to have the shock extenders
@tamps21473 жыл бұрын
Ok I appreciate it bro thanks 🍻
@peloteroopt79183 жыл бұрын
@@tamps2147 no problem
@93gmctruck18 Жыл бұрын
No mames the welds look like crap wey
@peloteroopt7918 Жыл бұрын
Yeah no mames 😭😭😭
@lowboostgarage89253 жыл бұрын
Link for the c notch ??🛻💨
@peloteroopt79183 жыл бұрын
I make them bro 😁
@davidthaabagchaser42563 жыл бұрын
You should of grinded the area around were he was gonna weld
@peloteroopt79183 жыл бұрын
That was our first time doing it after that one we have been doing better prep work thanks ma boy
@boostedjrrr3 жыл бұрын
Is it still holding up good? I have a flux welder too but I don’t know if it will be strong enough. I don’t plan on towing hauling anything in the bed anyway.
@peloteroopt79183 жыл бұрын
Yeah its is just go slow when u weld so it get good heat you should be good ma boy
@boostedjrrr3 жыл бұрын
@@peloteroopt7918 bet, if u can find out what wire speed and voltage yall used on the welder let me know bro
@peloteroopt79183 жыл бұрын
@@boostedjrrr voltage 5 wire speed 2. 1/2
@boostedjrrr3 жыл бұрын
@@peloteroopt7918 alr thanks man
@elmeromero92883 жыл бұрын
Not bad on the welds, but try using a 220 welder next time, for strength.
@peloteroopt79183 жыл бұрын
Thanks bro its still holding on pretty good
@brandonjasso30644 жыл бұрын
Puro opt pa🔴⚫️ desde oklahoma
@peloteroopt79184 жыл бұрын
Es todo
@michaelchristian79893 жыл бұрын
Looks good. Both just better welds would be better.
@peloteroopt79183 жыл бұрын
Yeah lmao 🤣
@ironguy19162 жыл бұрын
Not gonna lie I cringed when he started welding to a non prepped surface
@peloteroopt79182 жыл бұрын
Till this day welds are still holding up 😁
@BrokeBoyzKustomz4 жыл бұрын
Please tell me he used to grinder to take off all the paint from the notch and frame🤦♂️ so the welds can actually Work lol
@peloteroopt79184 жыл бұрын
Yes he did
@RedEyedPatriot4 жыл бұрын
Ol Snitch9 music in the background.
@peloteroopt79184 жыл бұрын
Yes sir old skoo the best 👌
@RedEyedPatriot4 жыл бұрын
@@peloteroopt7918 old-school is cool but takashi69 is trash
@sturaqgaming64814 жыл бұрын
Them welds are nasty 👀 but good try you start from somewhere 💯💪🏽
@peloteroopt79184 жыл бұрын
Yeah new to the weld game lol
@sturaqgaming64814 жыл бұрын
@@peloteroopt7918 I’m a lil new to drop trucks lmao idk what I need to drop it all I know is that you need a c notch and from the looks of it I can make it myself but idk what I would need or what would go welded
@israelvergara62793 жыл бұрын
Not the Chicago electric 😭
@peloteroopt79183 жыл бұрын
Hahahahaha yeah that was a long time ago and it was my homies
@sixfootfourmike3 жыл бұрын
Harbor Freight up in this biatch
@peloteroopt79183 жыл бұрын
@@sixfootfourmike lol not any more 😅 I got a Lincoln now
@MechanicalDrifting3 жыл бұрын
Shiiii if yall can do it so can I
@peloteroopt79183 жыл бұрын
Hahahah yup yup
@juiceman55064 жыл бұрын
"Me quemo la lonja" 😂😂
@peloteroopt79184 жыл бұрын
Yup lol
@juiceman55064 жыл бұрын
Lol
@gerardoespinoza7623 жыл бұрын
Damn i hope u didn't use flux instead of mig bro
@peloteroopt79183 жыл бұрын
Lol what ever he used its still on there 🤣
@gerardoespinoza7623 жыл бұрын
🤣🤣 good but mig with argon is alot better and holds stronger but am glad its still on i just drop bags on my 95 my self am a iron worker by trade keep up the good work bro
@peloteroopt79183 жыл бұрын
@@gerardoespinoza762 thanks bro
@joeroe28392 жыл бұрын
@@gerardoespinoza762 nope sorry not true bro lol flux penetrates better than mig..mig is mostly for a nice pretty weld ..flux might be dirty but it penetrates way better ..
@daviddonahue3192 жыл бұрын
No gas? Didnt even grind the frame for a clean weld??? Dirty welds equal weakness. Smh. Guess I'm looking for a better video to get some tips.
@peloteroopt79182 жыл бұрын
Yeah no gas that was our first try on using a welder lol but now I have a gas welder and yes I'm grinding the frame for a much better weld and sorry you couldn't get any tips off this old video maybe look at my resent video and hope u get some better tips 💯💯💯
@pubchavaEdE3 жыл бұрын
Where did you get your cnotch from
@peloteroopt79183 жыл бұрын
Ebay
@Deebo_4793 жыл бұрын
Copyright bro
@peloteroopt79183 жыл бұрын
Not yet maybe when I hit 1k subscribers lol
@danieljonthanayalaramirez3893 жыл бұрын
Una manera buena de , debilitar el chasis y además la no está soldado correcta mente , ese chasis pronto lo tendrán que reparar.