C-notch on a 1997 F150 10" Drop

Installed a C notch and 2" block under the 6" flip kit with 2" drop shackles for a 10" drop...
Dont forget to like and subscribe for upcoming...
iG aquinorejectrides
Dropped Trucks, lifted Trucks, Drop kits, lift kits, leveing kits, How to install lift or drop kits, C-Notch, OBS Trucks, Single cab, custom trucks, pickup trucks, F150 Drop Trucks, Jeeps, Mustang, Aquino Reject Rides

[@Deathmetalmechanic]

Thank you for all of your F150 videos. Really helps a ton. I wish you the best 🤘🏼

[@AquinoRejectRides]

Not a problem...

[@jorgerios7156]

We’re did you get your drop blocks from ?

[@AquinoRejectRides]

I got them on Ebay

[@AquinoRejectRides]

Look at this on eBay www.ebay.com/itm/273913153600

[@pablojimenez2413]

Donde compraste ese kit se ve hermosa

[@yungalexxx288]

So you got flip kit 2in blocks 2in drop shackles & c-notch ?

[@AquinoRejectRides]

yes I do it's still bottoms out might have to get some coilovers

[@yungalexxx288]

Thats hawd, clean truck g 💯

[@AquinoRejectRides]

Thanks

[@jrzuniga1410]

Hello there did u have to mess with the drive shaft or no because I would like to make my truck more lower in the back I have c noth and shackle shocks extender

[@AquinoRejectRides]

No I didn't have to mess with the drive shaft at all.

[@jrzuniga1410]

@@AquinoRejectRides thank you so very much for your help

[@AquinoRejectRides]

@@jrzuniga1410 not a problem

[@josevazquez5450]

where did you get ur shock extenders?

[@jrzuniga1410]

@@josevazquez5450 eBay

[@statik_ford1]

Cause i got a flipkit and lowering shackles i just need c-noth do i need tubs

[@AquinoRejectRides]

Not if your running stocks....you wont need tubs

[@statik_ford1]

Appreciate bro

[@cesarroman5205]

Which flip kit did you use?

[@AquinoRejectRides]

Here is the link I got it from Ebay

[@AquinoRejectRides]

Look at this on eBay www.ebay.com/itm/Flip-Kit-ford-f150-1997-to-2003-/124561651080?_trksid=p2349624.m46890.l49292

[@cesarroman5205]

@@AquinoRejectRides thank you

[@gpaniagua87]

Is that a long bed

[@AquinoRejectRides]

No it's a short bed

[@Elver_Galarga_jugo]

Did you ever straighten out those frame rails? They look like they kinked at the C notch

[@AquinoRejectRides]

No I didn't have to..

[@79dent]

They are kinked at the c notch it's very visible, this is what happens when you do everything on jackstands and don't take proper measurements. Your actually supposed to do the c notch while the axle is out, with Jack stands on each side of the cut very close to it. And you take a level and run it across the rail to make sure it's straight.

[@statik_ford1]

Yo bro is it tubbing the back or not

[@AquinoRejectRides]

No rubbing at all.. on my truck

[@louisvillegas9893]

How is it so low with just a cnotch ?

[@AquinoRejectRides]

Just need it so it wont bottom out, for a smother ride.

[@youngg9591]

@@AquinoRejectRides How do I stop it from shaking from the back I got the same Ford f150 as yours I put the flip kit on it. It just shakes from the back. What should I do

[@AquinoRejectRides]

@@youngg9591 what do you mean by shaking? Like load control?

[@youngg9591]

@@AquinoRejectRides the back of the truck bounces up and down while riding

[@AquinoRejectRides]

@@youngg9591 you need to get the belltech drop shocks and will stop bouncing

[@joeycedano8178]

yo what songs playing at 3:30

[@AquinoRejectRides]

I don't even know, it was just playing..

[@joeycedano8178]

@@AquinoRejectRides man sounded sick😪

[@jorgerios7156]

Aye bro you got any social media so I can talk to you

[@AquinoRejectRides]

Email me and I'll send you .my number [e-mail]

[@AquinoRejectRides]

Ig# aquinorejectrides