C60 C70 EX-i Fiery reload DIP dip switches part 2 of 2

C60 C70 EX-i Fiery reload DIP dip switches part 2 of 2

[@martinbuss6818]

This link to my cloud storage contains some pages giving detailed dip switch settings and steps to reload from a USB drive u.pcloud.link/publink/show?code=kZIF36XZxAw30ucDcoJyYOcb0qdxYSbQ1OKV

[@martinbuss6818]

This is a link to the tool to create the USB thumb drive from the ISO install disk images fir the C60 C70 EX i (intergraded fiery/box strapped to back) u.pcloud.link/publink/show?code=XZPH36XZjMTgqkVxWzbDweRDfehLFhLlVvtk

[@zagaxrisk5781]

Hi Martin, u have system software iso images for exi print for xerox 570 FS100 and iso images for xerox 560 integrated fiery System 9 Rel2? I would appreciate it very much!!!

[@martinbuss6818]

Yes, I’ll theses are the links B3G V1.0 u.pcloud.link/publink/show?code=XZUXaX0ZwsYEk7P9V3SQnkgW9zYL7FPriXQV u.pcloud.link/publink/show?code=XZUXaX0ZwsYEk7P9V3SQnkgW9zYL7FPriXQV u.pcloud.link/publink/show?code=XZHzaX0ZOTJezUFGWEVPH6bUI68SkLBDvutk

[@bmprint5235]

i have a problem in Ex Fiery "xerox C60" it mentions 50 not 00

[@vibinvenugopal6775]

Hello Martin, Do you have the reload software for c75 integrated Fiiery

[@agusfazri]

hello boss... I have a fiery for a xerox c70 machine, my hard drive is broken and i don't have a copy. I need a guide and tutorial on how to install it to my new hard drive..... thank you

[@cetakkilatbekasi6228]

Hi Martin Do you have ISO for xerox c70 EX-i version 1.0? My hard disk is damaged and does not have an installation DVD

[@martinbuss6818]

Yes try this download u.pcloud.link/publink/show?code=XZKp36XZWjy9jmLirwm2uUc3GBzWFz2kDTBX

[@martinbuss6818]

Might also be this…not sure if this is the C60 C70 EX or EX-i …….take a look see if this is what you need if my first shard has an issue u.pcloud.link/publink/show?code=kZl2r70ZLcEhjOWOasFWnMXwKU3Bk5Tk7JKy

[@bishnuprasad4005]

Shall I install 5PB fiery system software to R7B. Is this same two fiery use same software?

[@gonzalezamestica]

Hello Martin, the HDD of the Fiery E300-07 is damaged, I need to install the software again, it is a Xerox C70

[@gonzalezamestica]

P/N45148166 EFI FIERY E300-07

[@hammuummah]

Hello I have a xerox color 570 the hard disk for the fiery failed Where can i download the clone image for it?

[@asifseeharran3343]

I need help with my xerox c60 efi fiery giving error 22/15

[@asifseeharran3343]

I need help with my xerox c60 efi fier

[@newbhojpurisong4781]

I need help with my xerox 570 Error code 55

[@bishnuprasad4005]

How to reload system software fiery c60

[@theflipchannel964]

I have a problem, give me headaches every day working whit Xerox/Fiery. Every time i turn the machine sometimes when i send a printjob gets stuck in the job list while processing, doesn't goes to print section in fiery workstation, nothing happens. Also can't cancel or delete the job. To get start printing something i need to shutdown the xerox c60 (fiery doesn't shut off automatically with the machine, which means that its stuck or some problem whit, otherwise it would turn off too), turn off fiery with the button in the back. Turn on all over again and praise all gods to start printing something. Why this happens? Is there any other way more easy instead restarting the machine? Thanks.

[@martinbuss6818]

Your almost certainly missing software patches for the Fiery. Is the fiery connected to the internet with “correct” DNS and Gateway address? And have auto update enabled? Also if you install Command workstation on a local PC you should be able to se the “stuck” job and get an error description, and be able to delete the problem job without a reboot....unless it has really “crashed” the entire fiery server. If all else fails I can help you durring the week after 5;00pm. I no longer work for Xerox 😥 but not many people are left with the skill set on Fierys I have.

[@theflipchannel964]

@@martinbuss6818 Hi, thanks for replying. I'm pretty sure that fiery connected to the internet with correct DNS and Gateway, otherwise it wouldn't print anything if so, the stuck printjobs thing only happens sometimes. When i turn the machine/fiery i have some luck at first time and it prints all the way, other times that i turn on starts bugging me to restart the machine until it prints something at first attempt. About the patches, im not sure where i could see those to apply. I only work whit Xerox/Fiery about a year and half and all this time i'm trying to figure this out. This fiery "behaviour" makes me to lose time... It's something in Fiery "desktop" box because, like i said above when i turn off the xerox and see that fiery won't turn off also the same time it's because it's stuck whit something that makes me to go back the machine to turn off and on the button. I can manage the software Fiery Command Workstation when the printjob is stuck in the "Processing" mode. Example, when i have others printjobs in queued i can cancel them, but the one at first that it's stuck i can't cancel or deleted... Other option that i've have been trying is only turnning off and on button at the fiery box to reconnect the server and when it's connected again i can cancel/delete the job that it's stuck/spooled. But from this part i could have luck to print something..or not.

[@theflipchannel964]

@@martinbuss6818 PS. The software is updated but the patches i dont know where to install them.

[@esman0011]

Hi Martin, if Fiery "Ex i" server boot and display "00". But Command Workstation always can not connect to server successfully. Q1：How to repair this problem？ Q2：How can I recover or reinstall the server？ (I do not have any Fiery CD) Looking forward to your reply.

[@nduggadaniel3869]

Hello boss How do you reload software on ex j75

[@martinbuss6818]

The External Fierys “EX” for external EX i for “internal” If it’s the external it has a built in DVD drive. If you put in the first Fiery system DVD and boot the Fiery you should be given an option on the LCD display of the fiery (or you can hook a monitor and keyboard and mouse to it) The options are backup, restore or install. If you have a good backup saved to the system you could try the restore option. If not it’s a reload and setup, and setup IP DNS Gateway and subnet mask, then make sure the auto update is enabled.

[@copieselect9846]

Hi, is there a way to reinstall iso firmware server for docucolor 240

[@martinbuss6818]

Yes you did not say if your Fiery was an external or internal (bolted to the back with no screen bustled) This is the link for the ISO software for the 1.1 EXI bustled internal u.pcloud.link/publink/show?code=XZCUbFVZaFGE1EVKyvH22yNcL53vtmY6mojV This is the link for the 1.2 EXi Bustled internal u.pcloud.link/publink/show?code=XZmIbFVZgxJMFAAfIOL88htjyJPL3bFyt4HX This is the link for the Fiery EXP 240/250 ROHOS external u.pcloud.link/publink/show?code=XZPIbFVZDyI1MtQvHxRGnMx3s3DD0JsQX9vX Fiery WYN serial number start. EXP 240/250 external 1.01 u.pcloud.link/publink/show?code=XZEIbFVZnH64dA8qKL0bXsIAB1VzYpob6M6y

[@martinbuss6818]

But if your talking about the xerox print Engine firmware, I belive you need a Xerox service laptop with special software to reload the IOT print engine xerox/Fuji firmware

[@copieselect9846]

@@martinbuss6818 Thank you for your reply. I am new to printing. I have Docucolor 240 with fiery server attached outside (like a small PC) the DC240 machine. The web application button on the screen disappeared last week and the network ports blink orange and yellow on both net and scan ports in the fiery server. when try to connect from PC says "server name or ip address may be invalid" and not printing just makes photo copies. The serial number is VGW617891. Please guide me with some solution. Fiery server have three serial numbers. WUP887494 Thank you again.

[@martinbuss6818]

Watch these videos, it’s important you have the correct Cable. If you have the bustled fiery it uses a cat5e crossover Ethernet cable (not a straight patch cable cat5E) between the fiery and the xerox print engine kzbin.info/www/bejne/aZKVoHadaNyIeNU

[@bishnuprasad4005]

How to copy clone image to pen drive?

[@martinbuss6818]

Read the other comments, but you download the fiery USB creation tool, and use either the ISO disk images or actual CD’s when you run the utility to create the bootable usb reload “pen drive” thumb drive u.pcloud.link/publink/show?code=XZPH36XZjMTgqkVxWzbDweRDfehLFhLlVvtk

[@bishnuprasad4005]

But when I drag System ISO image it won’t come anything in USB TOOL SETUP

[@bishnuprasad4005]

@@martinbuss6818 thanks for support need more support please

[@martinbuss6818]

This is a link to the iso image files to create the restore boot USB thumb drive u.pcloud.link/publink/show?code=kZ1p36XZlnGCAcQ9Kdz9W3uAjGX5EmyaMOL7 u.pcloud.link/publink/show?code=XZKp36XZWjy9jmLirwm2uUc3GBzWFz2kDTBX

[@marcolinstones9178]

I need your help with something