C7Carbon Camaro ZL1 1LE Spoiler : Install and Review

[@Joshuazfix]

I was able to fit it on 2014 chev Camaro Ls and it looks so beautiful 😍

[@dgvette1]

NO MORE REVERSE CAMERA?

[@switchblade1Le]

You mean, this c7 carbon zle wing comes in 1 piece? Most wing comes in 6 pc. Thanks

[@susanrutherford3806]

Nice video! I would love to see installation of smart active wing in the future!

[@killthepartylol8487]

Gooooood video bro thanks

[@carratala59]

Outstanding video. Very Informative

[@WrenchedOutGarage]

Thank you

[@carratala59]

@@WrenchedOutGarage I was going to order the spoiler but mine has a camera mounted on it. Its for the wide angle view. I have a 2019 ZL1 with regular spoiler.

[@EduardoHernandez-vv5pb]

Good lookin badass car🏆

[@WrenchedOutGarage]

Thanks Eduardo

[@louissnipe6778]

I wanna put it on my CT5 V 😅

[@readyon3506]

can the spoiler be removable whatever time you want or once it is installed, it's nonremovable, i mean remove it when you are racing and put it back later

[@WrenchedOutGarage]

You could however you would have to dismount and re install it .... through the trunk lid . More work then what’s it worth

[@readyon3506]

​@@WrenchedOutGarage cuz with the spoiler it would be very hard to reach the top speed

[@kastoabelard4228]

Would this fit on the convertible and allow the top to function properly

[@WrenchedOutGarage]

Kasto, Great question I would contact C7 carbon for the answer to that.

[@rin2230]

Do you think this slows down the car around the 100 mark? I've heard that it slows the car down because of the way the wing is looking.

[@michael-ev5fk]

Which height spoiler did you install? The 6 1/4" or the 4 3/4" ? It looks great on the car. I really like your before and after pics, it gives a good result comparison. A close up 360 would be nice to see. The spoiler has a lot of curvaceous lines that aren't easily seen in a video and a slow close up would be great. Good job sir.👍 Thanks

[@WrenchedOutGarage]

Thanks Michael, this is the 4 3/4 height.

[@michael-ev5fk]

@@WrenchedOutGarage Thanks Anthony. I'm thinking seriously about getting one after seeing your video.

[@WrenchedOutGarage]

They have a heck of a deal on them right now.

[@callengerta2071]

@@michael-ev5fk i just bought mine the short version look super

[@Spaceman2484]

ss camaro Super cool! I want one too

[@christianslense455]

I didnt see new glue pads put down. Kinda just bolted it to the decklid looked like.

[@UncleRayRayGarageEmporium]

What about adding silicone caulk just around the holes to protect the metal of the trunk? Is that just overkill? I've seen other guys trunk paint bubbling where it is mounted.

[@WrenchedOutGarage]

Hi Raymond, you could definitely do that if you chose to.

[@KamalaKackles]

Will that for a 2017 LT v6?

[@WrenchedOutGarage]

I would check the c7carbon website for fitment

[@RCbashingtheKRATON]

Looks badass bro👊👊

[@WrenchedOutGarage]

Thanks man

[@miguelm3097]

Hello can you by any chance tell me the adhesion remover you used? I cannot get the old gasket off.

[@dclemmons1234ify]

Can this go on a 1LT 2016 convertible?

[@JasonJolo98]

Hi did you ever get an answer and/or did you you change your OEM spoiler? Thanks.

[@MotoD124]

@@JasonJolo98 it can but I wouldn’t recommend. Wing works best with 8 cylinders 🍚

[@Everpresnt]

Love the vid just installed my zl1 spoiler. Only problem I have is with the middle top bolt, I’m having trouble fully tightening it. This is because my current wrenches are getting blocked by my third brake light. What type of terminal or regular ratchet did you use? The bolts for my spoiler are 10mm.

[@camarojay7027]

Do you have it for the ss 1le? I currently have the blade spoiler

[@WrenchedOutGarage]

Did you happen to pop the truck and see the there are caps over the factory holes under the blade spoiler ? If not then you would have to cut them or have a shop do it for you.

[@camarojay7027]

@@WrenchedOutGarage yes there are caps but they are different from yours.

[@JoeyBurnsRed]

@@camarojay7027 did you end up getting one?

[@camarojay7027]

@@JoeyBurnsRed no but i want one. But everyone keeps telling me that the holes are different on the ss 1le

[@JoeyBurnsRed]

@@camarojay7027 damn i might get a 1le lol wanted to know

[@CG-un4tr]

Nice video man 👍🏼 Well made, well explained.

[@WrenchedOutGarage]

Thanks Chad

[@ivanaleman4390]

How long did it take you to receive your zl1 wing? I heard they take a pretty long time to ship it out?

[@WrenchedOutGarage]

Around 6 weeks .. they are made and not just sitting on the shelf

[@Joshuazfix]

5 days

[@Vking2351]

Hey would this fit the convertible or does it get in the way of the top going down

[@WrenchedOutGarage]

That’s a great question, check out the install directions www.c7carbon.com/2016up-camaro-zl1-1le-style-rear-wing-gloss-black-p-682?zenid=d55c85830a4d375c5cdefae35cdb6208 And if needed ask C7Carbon they are pretty good with any questions like that.

[@PrivateEggroll]

Do you know if I need a reinforced deck lid to put this on my 16 SS?

[@WrenchedOutGarage]

You shouldn’t

[@tonykrum3425]

what tool did you use to get those white/plastic pins to release.

[@TheCar-diologist]

Did you notice a difference in mpg due to increased drag?

[@WrenchedOutGarage]

No difference

[@shootpse88]

You dont buy a ZL1 and worry about mpg!!!! You pay a gas guzzler tax because of mpg

[@josephkan8253]

which one matches the OEM height? thanks

[@josephkan8253]

so which one?

[@122276mjs]

Will this fit the SS 1LE predilled holes

[@WrenchedOutGarage]

I believe it will as long as it has the six

[@juju2505]

Can I use this for my 2017 rs?

[@WrenchedOutGarage]

Yes

[@DENTONCABINET]

Anthony after a year would you still go with the C7 ? has it held up ?

[@JoseSandoval-kz1li]

Which heigh kit matches oem ?

[@WrenchedOutGarage]

Hello Jose, The one that is in the video is the shorter of the two available sizes from C7 Carbon

[@JoseSandoval-kz1li]

Wrenched Out Garage so the one in the video is the one that matches oem height or is the taller option the oem height

[@WrenchedOutGarage]

The taller options appears to be the height as the shorter one is a couple inches taller then the stock SS full wing spoiler

[@marwanalhasan6330]

Can I install this on a 5th gen camaro?

[@WrenchedOutGarage]

Well the answer is yes and you can do whatever you want to. However, this is designed for the 6th gen which will create a need to customizing the mounts.

[@alejandrojordan6227]

Who else sells the shorter version other than c7?

[@WrenchedOutGarage]

ACS composite and Chevy

[@RTAMOTORSPORTS]

You still liking it? I'm thinking about getting the carbon one myself, i see allot of other companies make you epoxie the side winglets, these seem to come over piece

[@WrenchedOutGarage]

I do still like it a lot. Carbon Fiber or satin black would be the way to go. I do think I should have broken went with either other option

[@RTAMOTORSPORTS]

@@WrenchedOutGarage thanks bud!!

[@DanteGonxhja]

Is the carbon option genuine carbon or fake?

[@Puma.predator]

I’m planning to buy the wing myself, but I have the 2019 Camaro 2SS (the one with the RearCamera). Is there a specific wing for that?

[@WrenchedOutGarage]

Yes there is

[@sammyasad1]

I buy one is cheap stuff ,, Is not worth the money

[@Ravaniscool]

Extremeonlinestore.com has one for 450.00 but it's matte black with the camera option.

[@joshharrison1169]

did it come with adhesive or tape already on it ? im about to order one and i do not wanna go through the hassle of puttin that stuff on

[@WrenchedOutGarage]

Tape where ?

[@joshharrison1169]

on the bottom of the spoiler where you put the spoiler in the holes? like how the factory spoiler had all that sticky adhesive

[@jerrytietz5204]

This is nice but I need one with a back up camera

[@adamb8984]

Would this fit on a base model 2017 Camaro LT? I have no spoiler installed on my 2017 Camaro LT. I wanted to make sure this would fit, any idea?

[@KamalaKackles]

Have you figured it out? I’m liking into one for my 2017 LT V6.