C8 Corvette Z06 Front Lift Lowering Collar Install!

[@calvinricks9188]

Awesome Job!!! That ZO6 looks SuperFantastic!!!

[@ParagonPerformance]

Thank you 🙏

[@N0neofyourbusiness.]

Damn the z06 looks great in black

[@JLSpeed]

I have a set of the lowering collars for the c8 stingray, havent installed them and will be getting a z06, would i be able to use the stingray collars on the z06?

[@ParagonPerformance]

You can use our v1 collars but they may interfere with a weld on the bottom. You can either upgrade to these or purchase a shim for a 3/8” drop.

[@42obed]

Hello. Love the helpful videos. Will this void warranty?

[@ParagonPerformance]

Glad you found it helpful! No it wont void the full warranty of the car but it may void the front lift hydraulic pump. We recommend checking with your local GM dealership for clarification.

[@drksyderacing145]

What is the height with lift now? Texas roads are terrible and lowering is asking for it.

[@ParagonPerformance]

3/4” lower than stock

[@alexxvue01]

It looks like there is no need for spring swap?

[@gtredin2793]

What size is that nut on the top of the strut in the center

[@ParagonPerformance]

We use an open 17mm socket.

[@pro5.019]

I assume the front lift will be self bleeding upon use?

[@ParagonPerformance]

Bleed procedure is the same as the Stingray. Just run it up and down a few times and top off the fluid.

[@Sirrichz28]

Nice, but you should have done a side by side b4 & after

[@thiosemicarbizidebenzoylal2921]

This car has to be realigned after this procedure?

[@ParagonPerformance]

It's not necessary but we recommend having it checked as you're changing ride height.

[@thiosemicarbizidebenzoylal2921]

Thats a Z07 package spring set?

[@ParagonPerformance]

Z06 springs. Z07 is the same design just has stiffer springs.