Рет қаралды 981,186
I am pretty sure that a lot of people are introducing a computer desk in their houses due to working remotely. In today’s video, I would like to share with you the way to cleanly arrange the cables underneath the desk by using a cable tray. If you are interested in the products that I used in the video, please check the list below.
<The products that I used in the video> (The numberings are connected with the numberings in the video)
■■■Base■■■
① Sanwa Supply Cable Wiring Tray
〔Clamp type _ no tools required〕
amzn.to/3p6j1R6 (The product may have been replaced due to being out of stock)
a.r10.to/huPORj (Rakuten)
〔Screw type_ no tools required〕
amzn.to/39YMWoE (Amazon)
a.r10.to/hwXqqe (Rakuten)
※ Please check the link for the products may have been replaced due to being out of stock.
---------------------------------------------------------------
※Cautions to take when installing the cable tray
If you have introduced a display arm, there is a possibility of the cramp and the cable tray interfering. In this case, please install it a little bit offset or adjust the height by putting a board in between the fixing part of the cable tray.
※If you are using a screw type, please separately purchase an insert nut (if needed, a SEMS Screw too)
〔If the display arm does not interfere〕
◎Insert nut(M6×10) amzn.to/2M4VDFZ
◎Screw→Please use the screws that came with the product or separately purchase and use a wood screw.
〔If you need to put a board in between to avoid interference〕
◎Insert nut(M6×10) amzn.to/2M4VDFZ
◎SEMS Screw(M6×25) amzn.to/3aao6Cu
The above products are estimating the case of using a 10mm thick board to put in between.
※ amzn.to/2NwIfL3 ←Although I’m not sure if it’s possible to use it in this case because I haven’t checked the product myself, I think using this kind of part to adjust the height is a good solution too. In my case, I installed a foundation that I made with a 3D printer to avoid interference.
※I installed it in the opposite way to seek more blindness to make the appearance clearer.
※Please refer to this video of how to install the insert nut.
• DIY│IKEAの天板でPCデスクを作る方法
---------------------------------------------------------------
②ELECOM Power Strip Lightning Guard
amzn.to/2Yesj2h (10 Openings)
amzn.to/3oszT3W (6 Openings)
※In my case, I bought the 2m length product. If the outlet is far away from your desk, please choose a product that is long.
③Panasonic Rolling Tap
amzn.to/2L40WVO (Black)
amzn.to/2MHflIf (White)
■■■Organize■■■
④JOTO Storage Sleeve
amzn.to/3ooUN3T
※The fibers of the cut surface will fray so please heat it with a lighter or something. (Beware of burns)
⑤CableCreation Cable Zip Ties
amzn.to/2MdIjiG
⑥Mini Clamp for crafting
amzn.to/3pA99QE (Black)
amzn.to/2YrrbIB (Silver)
※The silver type can be fit to a square leg of a common desk, not an adjustable desk.
※Please use the cables of equipment that use a lot of electricity without bundling or bending them.
※Please refer to this page for how to safely use table taps or extension cords.
www.amazon.co.....
■■■Details■■■
〔SD card related〕
⑦SONY SD Card Reader
amzn.to/3qXR2nV
UGREEN USB Extension cord (3m)
amzn.to/3t9Om8K
NICHIBAN Double-sided Tape
amzn.to/3iWV9xz
〔Earphone related〕
⑧SAPAS Cable Holder
amzn.to/3poqT17
ELECOM Earphone Extension Cable
amzn.to/3a6DHCI
⑨Masaru Industries Cord Cover
bit.ly/2Mdeu1H (1 piece/Yodobashi)
amzn.to/39uASfC (10 pieces)
※It is difficult to cut it with an ordinary cutter so, I recommend you to use one of these.
amzn.to/3a0HQJy (Mole Cutter)
amzn.to/39q4wTt (Hobby Saw)
⑩Cable Clip
amzn.to/3teDhDp
■■■Others■■■
〔For the display|Cables to connect with the computer〕
⑪UGREEN DisplayPort (3m)
amzn.to/39rfGal
⑫UGREEN Printer Cable (3m)
amzn.to/3iX4IfX
〔For gadgets|Cables to connect with the computer〕
⑬UGREEN USB→Type C Cable (3m_For Audio Interface)
amzn.to/2KWHsCe
⑭UGREEN USB Extension Cable (3m_For SD Card Reader)
amzn.to/3t9Om8K
⑮Stouchi USB C Extension Cable (1.8m_For Extending a web camera)
amzn.to/3pu33kp
---------------------------------------------------------------
<SNS>
【Instagram】 / crossty.design
【Twitter】 / crossty_design
【Tik Tok】 / xt_crossty
---------------------------------------------------------------
<My crafting channel>
/ xt_crossty
---------------------------------------------------------------
#Arranging the cables #Computer desk #Telework