Solidworks sheet metal tutorial | Design of Electrical enclosure in Solidworks

[@syedfasihuddin3499]

I love how you say "See" and "Look". Really nice tutorials. Love from Pakistan

[@mustafakodi8144]

Great work.thanks dear,your friend from iraq 🇮🇶🇮🇶🇮🇶

[@hasangun7005]

I started to SOLIDworks. I can not speak English. I will follow your videos. Your good teacher is sensin.Thank you.

[@CADCAMTUTORIALBYMAHTABALAM]

Hasan Gün Thanks & you are the most Welcome.

[@settan3123]

13:09 The back mount holes should be extruded outside, not inside. It makes a gap and help to install panel with roughness on the wall.

[@strickos91]

correct, also prevent screws from sticking up inside

[@markcnc]

That is not correct. Most code would require mounting to a backboard or other flat surface.

[@charlestoneoyoo]

Learnt Sheet metal with the help of your channel in August 2023...I'm grateful always!

[@wendygrant2735]

"I hope you like it"? I love it! Great tutorial.

[@fadhelmokrane2079]

Big thanks from France 😄

[@PLCTrainingforBeginners]

Very useful video. I'm electrician but I learn a lot.

[@carmenceciliaquinteroherna9553]

I had an assignment about sheet metal and you and your video helped me so much...thanks!!!

[@carlosmaffessoni4638]

Unnecessary to say: one more great tutorial, sheet metal is the SW "soul", thank you!

[@xavieraxl1082]

you all prolly dont give a damn but does anybody know of a way to get back into an instagram account..? I was stupid lost my account password. I appreciate any tricks you can give me.

[@arthurwesley7444]

@Xavier Axl instablaster =)

[@xavieraxl1082]

@Arthur Wesley I really appreciate your reply. I found the site on google and I'm trying it out now. I see it takes quite some time so I will reply here later with my results.

[@xavieraxl1082]

@Arthur Wesley It did the trick and I now got access to my account again. I am so happy! Thanks so much you saved my ass !

[@arthurwesley7444]

@Xavier Axl no problem :D

[@hms1688]

Thanks for your share, it's outdoor metal enclosure, solidworks is good for our design the drawing.We are a strong manufacturer in China, we made many custom metal enclosures, chassis and boxes, with high quality and competitive price.

[@surendarchander6011]

Thanks for you help . I have become good programmer in my company just by seeing you'r video

[@adrianosouzafilho8096]

I really like your videos. I am learning a lot about simulation Study and sheet metal by your classes. Thank you!

[@hms1688]

Yes, it's really good video. We are a strong manufacturer in China, we made many custom metal enclosures, chassis and boxes, with high quality and competitive price.

[@William3DP]

You are a gifted teacher. Thank you for this video.

[@bigdaddy7670]

Thank you for taking the time to teach us all!!

[@oswaldoarellano2515]

I just found your channel, this tutorial about sheet metal is really great and useful. I could learn and observe new operations. Thanks a lot.

[@jaimemunoz5211]

Thank you for the wonderful very descriptive model and assembly..!!

[@ashwinishukla2201]

Dear sir this is a good style of teaching.excellent video

[@jeyasuryamanikandan730]

Your doing great job my friend.keep doing well

[@vadari9705]

Straight to the point and very helpful. Thank you very much!

[@Vicky00930]

i like your video sir ❤️❤️❤️

[@md-shafiqurrahman5535]

Very very much like it . . .Thank you very much.

[@farhanfarooq93]

one of the best tutorial, keep it up

[@simonchang5311]

explained so clear. good lecture

[@EIIjot]

Thank you for the clear instructions and good practice projects you provide

[@cicerolima7410]

I use this videos to increase my skils.

[@omerfarukyazici2035]

you are so nice teacher man

[@DongguanHansweldCoLtd]

I would like to visit you next time I come India . Haha

[@rakeshshukla5973]

You are a good teacher sir

[@bigdaddy7670]

Excellent tutorial as always!!

[@karanpandey349]

Good I try it and make

[@mnia8917]

Very good. Tanks a lot.

[@parthpatel5062]

Very Good practices....

[@rajatkamboj5213]

Thanks Alot For Thr Tutorial Becasue Of You My LEVEL OF DESIGNING IN INCREASING

[@CADCAMTUTORIALBYMAHTABALAM]

Rajat kamboj Thanks ,

[@adm9690]

Great 👍 can you make a trash can with legs to open it?, Please 🙏

[@nikhil2687]

really helpful video... thank you sir...

[@alaakhashoun8092]

Amazing Work. Thank You

[@bobwilliams31]

Thank you very much for all your great SolidWorks video. I am really enjoying them and also creating them along with your videos.

[@Gabriel-ps3uw]

It’s really very great

[@kpnadventures]

Great tutorial but you left out --> in order to be able to use the forming tools in Design Library --> select the forming tool folder --> RMC --> check Forming Tool Folder otherwise it will be treated as part file and when you drag it on sheet metal part surface it will be adding another part to part file. Thanks for sharing.

[@amitvikram7325]

thanks i had this problem .,,. confused for more than 2 hours to fix this problem thanks for mentioning in the comment

[@Guren74]

great video

[@chrisliewwt]

I’m in love with your videos

[@volkand1830]

İt was great exercise

[@arukiarsyad746]

Thanks your best teacher for solid work

[@mdbodiuzzaman2422]

Take my cordial thanks. I have learnt a great a deal of SolidWork. Your requested to make SolidWork Electrical videos....

[@jasmeetoberoi9231]

Sir your back mounting hole is opposite the countersink should be inside

[@SoilHealthpk]

Very Good Presentation / Training Session #Gratitude I would soon start my own Solidworks designing - THanks

[@cdlopez29]

Thanks greetings from argentina

[@CADCAMTUTORIALBYMAHTABALAM]

Cristian Lopez You are the most welcome,

[@jededmonds7624]

Really helpful - Thanks

[@nikolarekovic3546]

12:30 you have to hold ctrl here

[@MONKEYBIFFSNIFF]

Great video!! Liked and subscribed!! 👍🏻👍🏻

[@namnguyenvan8253]

amazing, thank you, video very good

[@virukuttan1981]

Add one more constrain to stop the door. Now its 360 deg freely rotates on the hinge.

[@ЙОРИКОНСУЛТЕООД]

Very useful video my friend! Thank you a lot!

[@projectdesign3293]

ohh i underastood this . but i saw one video of checker plate which made directly from APPEARANCES TOOL + FINISH SURFACE OPTION . I DO THIS METHOD BUT i cant made by appearances.

[@CADCAMTUTORIALBYMAHTABALAM]

checker appearance available in tool, you can directly drag and apply, its looks beautiful is you have realview graphics cards,

[@CapeComorinStudios]

Need more electrical pannel videos

[@reymanguera766]

Thank You for this tutorial. Can you do more sheetmetal tutorial. I will be working in a sheetmetal fabrication factory. It will help me a lot if you do. Once again Thank You!!!

[@Thuyavan_trends]

Rey can help me

[@HarjotSingh-mo8lc]

Sir good job u r doing.... learning alot day by day god bless u, keep up

[@lewiskerchuis8017]

if you're having trouble with the louvre, make sure your thickness was set to 1mm on the base flange.

[@rawando]

Great job . Thank you

[@burakpadir]

Great tutorial for cutting but not good for production. How bending machine will work?

[@tusharagarwal2116]

Thanks for the nice tutorial!!

[@amanpreetsinghbhatti8805]

Perfect teaching style

[@tahy59]

Bend Allowance is not default it depends the machine usually brake press thickness

[@SteelFurniture-gt1ds]

Nice

[@coenhartman8677]

Good stuff, and I like his accent ^^

[@rehanpathan7094]

The great indian accent..

[@jokkny]

Hi, I had issues adding the louvres for some reason. I am totally new to solidworks; I really need to make a similar cabinet design. When I added the louvres, the size was extremely tiny, unable to position them and they would not be displayed. A red X would display beside the louvre component - I will recreate and provide the error here

[@rodrigochiozzini]

Very Nice

[@nesrdinabdu5558]

i always folow to you you are nice techer

[@rahulkumartomar1934]

Hi sir, there is one suggestion when you share your Tutorial video ...please share also pdf ya autocad drgs for us, if possible...this is helpful for us...for making design...i'm awaiting for your positive response...

[@christopherlawrence390]

Thanks! this was great

[@josefinaiipolicarpio6647]

hello, can you please tell us how to make design table for the louver...forming tool? Thanks

[@projectdesign3293]

share a video of how create checker plate in solidworks . Basic point of it .

[@CADCAMTUTORIALBYMAHTABALAM]

project design i will try my level best,

[@phillipmaser132]

Google will be slapped in the face for spamming Commerical and ads.

[@santhoshsakthivelkr2274]

GOOD BRO its very easily understand then good slowly teaching

[@gto3d612]

amigo muchas gracias por tu conocimiento

[@knowledgecentre2907]

sir, you please make video on polising brush for shoe. thanks

[@maulikpatelpatel5997]

good job sir

[@deepakPatil-gu8tb]

Thanx sir we are grateful to your work

[@ninjaabcde]

for the 3rd edge flange where you make the lip that the door is going to latch onto, how did you decide the appropriate length of it? in your opinion, is there supposed to be a Hem at the end of the Sheet metal to avoid cuts when handling? Thanks in Advance! :)

[@princepanday2659]

Thanks bhai

[@mtycoder]

you are awesome...... really cool

[@CADCAMTUTORIALBYMAHTABALAM]

Oscar Rios Thanks,

[@rohitgope4800]

Unable to Increase the Size of Louver... Please help

[@shi_fu051]

good job! thanks :)

[@TimesOfAkash]

Nice..its very helpful

[@jatinarora536]

Nyc session sir..its quite helpful ..i want to ask a question .. cant we change the size of louver??

[@mohammadsharifuddin9258]

Thank you. I is so nice and helpful.

[@pothurajugangadhar5809]

Hello Sir, I am not able to add vent feature to the side sheet as discussed in this video. The command is not getting highlighted. Help me out please

[@CADCAMTUTORIALBYMAHTABALAM]

once you sketch the circular design than go to window menus & choose insert than select Fastening feature than VENT option,

[@narayana1727]

@@CADCAMTUTORIALBYMAHTABALAM till IAM not getting vent command.can you explain detailed again and forming tools command is not coming in desgin libariey.kindly explain this

[@valey46]

Hello sir, Unable to drag and drop the louvers from library directly on to the face, any other alternate method?

[@kunalpatel8496]

The forming tool ( louvers, counter sink emboss) are no placing on surface instead it is getting placed on origin or in between the sheet metal . What should I do to place them correctly on the surface?

[@ilgattooo]

Same issue here. Also a window appears :"are you trying to make a derived part? Y/N"

[@dishankshah5080]

please make videos on assembly and sheet metal basics because without understanding it I can't understand advance examples.

[@CADCAMTUTORIALBYMAHTABALAM]

Dishank Shah we already made Sheet metal Basics tutorial, goto playlist & check Solidworks Sheet metal list,

[@caddesignsmechanicalandciv9142]

You could have limit the movement of the door by adding advanced mate.

[@caaspirant638]

this video is was very helpful for me .Ireally liked it

[@irliey1]

Can you do it in inventor. Tq

[@karimr1375]

Very helpful for beginners , Thank you so much

[@vasudeokatdare6530]

SUPERB !!!

[@max-vasilyev]

Oh. Thaks a lot. I'm from Russia and i look at your videos only. Like and subscription from me

[@hacker6695]

If i want to make Plastic Enclosure or 3D Printed part should i follow same method? Please guide

[@CADCAMTUTORIALBYMAHTABALAM]

yes it works for 3D printout,

[@abhishekprasad946]

which company are you working for

[@merajmomin9732]

very nice sir... can i know what is k factor and why its kept o.5???????

[@CADCAMTUTORIALBYMAHTABALAM]

K factor is the ratio of Neutral Axis & thickness of material, it is used to determine the bend allowance in sheet metal operations, k factor also depends on the radius of bend, we took roughly k factors, always different for different material k=0.50 taken for those bends have radius upto 3mm,