Advanced Sheet metal Exercise in SolidWorks

[@TABL3SIX]

I did this a little different. I used half of the front view and made my base flange. I cut away geometry to get the circular shape, bottom notch. Did a tab and edge flange for the back gapped feature like you did. Then did a mirror. I got the same dimensions in the flattened state as you did, so I figure it was a valid method.

[@marcelobordao6729]

Thank you! I learn Solid and English with you.

[@Abolfazl-9598]

The design of this sheet was excellent. Good luck.

[@fernandoleopoldokauling2405]

Excelente tutorial 🎉🎉🎉 parabéns pela apresentação! ❤

[@baoxilu2739]

Thank you! I have learned so much from you! You are the best teacher.

[@ahmadcaddesigner9510]

Mahtab Sir You are great Sir... Allah Bless you for your efforts 😘😘

[@vrushiketgaikwad411]

Thank you, Excellent teaching skills you have!!

[@rickymartin8782]

Very helpful 👍🏼👍🏼

[@SuperLanyard]

Thanks so much. You are just the BEST. I dream of being a draftsman like you someday.

[@leonardojimenez8496]

How do you know if the flange position is bend inside or material outisde

[@hms1688]

Good work!!! We also have rich experience in sheet metal fab, we are a strong manufacturer in China, with high quality and competitive price.

[@manuboker1]

Thanks! wonderful SOLIDWORKS instructing videos! 😎

[@mach-b-27-nadeemshaikh63]

Sir can u tech same in CATIA v5

[@carlosliendo3607]

You can mirror the cutout instead of redrawing it on the opposite side if you Unfold all the bends before the mirroring operation. Once the cutout has been mirrored then Fold the part back and then mirror the Tab. It should work that way.

[@arjundas708]

Excellent sir, how to rotate the drg while evaluation please let me know sir 🙏

[@catalinalb1722]

Great video! 🙂 👍

[@anant3138]

sir do you provide drawings of component by in this video and other videos too... plz sir

[@rambharath7753]

Really you are awesome sir Making more sheet metal development videos.... And make GD&T videos all also😍😍

[@cabiiusb]

Is there a press brake that bends it?

[@MTN_008]

Thanks dro. Can you make videos of sheet metal drawing? 🤗

[@ManojKumar-lv5qo]

Thanks

[@09matrixretro]

Excelente

[@scottsweeney1527]

Great video. thank you

[@omaromarrr5566]

great work thank you

[@ahmednessim4429]

Pls post more advanced tutorials like mold design and simulation

[@rajagupt3150]

Thanks for making

[@georgesanmartin]

Could you let me have the link for the drawing of this exercise? I would really appreciate it.

[@EricBuenoo]

Please do one on weldments!

[@scandesignacademy]

which software used for making this video

[@mdmonju27]

What is the configuration pc or laptop need.

[@OcmeoXoHgPo3]

Could you demonstrate how to import a part designed with another CAD, fix it, convert it into sheet metal body and get it's unwrap? I could provide you such example part.

[@abuhanifsaik5476]

Sir, Do you have something with atleast 50 parts?

[@sugenthvenkadesan9198]

Sir, thank you for your videos. Learning so much from them. I noticed that you used Solidworks 2020 for this video. May I know how to activate the pencil cursor for sketching?

[@vrbalukas]

is possible to download 2D plans?

[@chandrashekar.v6817]

Hello sir Can we do this as the planets rotate? A student waiting for your answer

[@write3dmachine839]

Thank you

[@امیدخان-م8ب]

You are wonderfull

[@mrfmrf7638]

Sir pls suggest best laptop for SolidWorks user.

[@lordstv7773]

please give me the sketch of this sheet metal for the dimensions for practice

[@mohansawant2216]

In sheet metal BAS 90 R 6.35 what is a meaning of BAS please reply sir

[@venkateshbantwal]

Hi Can you share the pdf of the drawing for Practice?

[@mangeshchaudhari663]

pls share doc as well

[@rkj4373]

Sir where i can get drawing

[@saidazizkobilov]

thanks sir

[@berkerbasketball]

thank you!

[@mrfmrf7638]

Sir pls make a one video for best laptop for SolidWorks

[@madhavabonam1019]

I think the side view of the drawing is of first angle projection whereas top and front views are third angle projection. Please correct me if I am wrong

[@tinojose6286]

i also felt same. i think the side views and sections views plament is wrong. if the drawing is in third angle projection

[@PrasadSonawanePrince]

Can we get pdf drawing of it?

[@TABL3SIX]

Can I get the drawing so I can practice without seeing the solution. I need the practice for CSWE. Thanks for the help.

[@TABL3SIX]

Found it on the facebook page.

[@maurociscati7009]

Olá tudo bem ! Esse exercício é ótimo como todos os seus exercícios . Mas gostaria de saber se vc pode enviar em pdf. Um abraço Mauro Ciscati Brasil São Paulo .

[@marcelobordao6729]

Mauro dá um print no celular. Eu faço isto.

[@moviesadd350]

Sir mai sheet metal die ki desing sikhna chata hu pls help me

[@loucloud3021]

It took me an hour and a half to make it without watching the video, I guess I must practice more 🥲

[@yohanand9a692]

Please put robotic arm video

[@TheFerhatbaysan]

adam adammm yaa bu

[@adilkhan-eb1cw]

Is part ka kya name h

[@libinpappachan3093]

Want to know more about analysis can help?

[@rohitgope1437]

Please Share the 2d drawing for practice purpose... Please sir...

[@tankc4103]

hi sir where is the 2D drawing video . can u give me 2D drawing VIdeo or PDF. Thanks

[@balrambadatya4724]

Can you please give this drawing pdf.

[@Seamonkey292]

Great video but your detailing has a few errors (One example of this: the overall length of a bent part should be in brackets () {indicating that the length of the bent part is not the absolute length but only a reference}). In-fact, all bent dimensions should be in brackets (). Also, you indicated the material thickness in all 3 bends in a single view when you could have just indicated this in the over-all dimensions (only once: as this dimension would only need to be mentioned once to show the material that would need to be ordered)

[@sevendesign1805]

Honestly, do you think that would keep me from hiring you? If you were to demonstrate ability up to the point where all I had as criticism was brackets vs no brackets, I'm pretty sure you'd be hired. There is a difference between innate talent vs trained talent. Your critique is misguided, in my opinion.

[@lewiskerchuis8017]

@@sevendesign1805 and then when a machinist mis-reads the dims because its different to every other drawing he has seen, you then realise you should have been more critical of the guy who cant follow simple industry standards.

[@harvijaysinhgraj5917]

हिंदी में वीडियो बनाएं। इंग्लिश के लिए सबटाइटल add कर दीजिए।।

[@wiebetheuws9388]

0:28

[@rolandsalunga3063]

Sir please pdf

[@janak7]

Please can you do more of inventor and less of Solidworks because not everyone is able to get Solidworks. Please

[@himanshughang9164]

I need freelance

[@rkcreation4979]

Sir apna wattsup no send kijiye

[@孙小圣-d8u]

印度口音

[@idreeskhan-zp5ey]

哈哈！你听懂么？

[@孙小圣-d8u]

@@idreeskhan-zp5ey 听不懂。

[@idreeskhan-zp5ey]

@@孙小圣-d8u 你会Solidworks吗

[@孙小圣-d8u]

@@idreeskhan-zp5ey 我会，但是不精通。你在印度哪里？

[@idreeskhan-zp5ey]

@@孙小圣-d8u 我不是印度人，也不在印度呀

[@Cultro.Knives]

Thank you