Solidworks Surface Tutorial | How to make Spoon in Solidworks

/ @cadcamtutorialbymahta...
You Can Support our Channel for more tutorials.
we will learn here Filled surface, Lofted surface,Trim surface, thickness, plan and Mirror in Solidworks 2016.
Solidworks Surface modelling
Filled Surface and Knit Surface
1)Solidworks tutorial for Beginners.
• SolidWorks Tutorial Fo...
2)Solidworks tutorial : Assembly
• Solidworks tutorial: A...
3)Solidworks tutorial vertical Stirling Engine
• SolidWorks Tutorial Ve...
4)Solidworks tutorial Forklift
• forklift Project in So...
5)Solidworks tutorial for beginners in Hindi
• SolidWorks Tutorial in...
6)Solidworks tutorial : Assembly in Hindi
• Solidworks tutorial in...
7)Solidworks Projects
• SolidWorks tutorial
like Facebook page.
/ cadcamtutorial
Subscribe our KZbin Channel.
/ cadcamtutorial

[@duck-yw2gk]

Using Solidworks for over four years, I only ever used the sketch and features tabs. I simply never found an object I could not create with those mechanics and felt that I knew the potential that Solidworks had for creating 3D models. I now see that I have been wrong. This video has opened my eyes to the possibilities I had been ignoring all this time. Good stuff.

[@josegonzales5913]

SW is super powerful. Crazy the things you can do with it.

[@rajatchandra2152]

@@josegonzales5913 ++

[@qozia1370]

Same using for2 years and never touched the surface tools.

[@jbbw667]

Excellent instruction. Even on faster playback you were easy to understand. A spoon is a great thing to model. I learned much. Thank you.

[@richardson8471]

I have a exam today. I learned more with your videos in one night, than with my teacher in the whole semester! Thank you!

[@brandonlambert1586]

Same dude we didn't even learn about surfaces at all lol My assignment was to model a few everyday items and we only learned how to Boss Extrude/Cut, Boss Rotate Functions, and Sweep Functions plus basics in assemblies so I thought a spoon would be easy haha Ended up asking an engineering buddy of mine how he would start, he said with the surfaces feature tab and a sketch which puzzled me so I looked it up and found this very helpful video

[@gearslayer-vn3gz]

Ya my friend took a class and he knew more than the teacher. Teacher loved him because he helped the rest of the class.

[@skimaticsnz]

yeah - such is the way with youtube channels like this. I did a SW course and dumped their tutorials for ones like this and passed.

[@Movieman1965]

@@brandonlambert1586 To be fair, surfacing is an advanced method for 3D modeling. Normally it is offered as a separate training at software resellers after you take the basic skills class. When dealing with product design that have what is know as compound curves and B-splines this is when surfacing really shines for the design of the part. In plastic part design ( I design plastic injected products) surfacing is used regularly and sometimes in conjunction with normal extrudes in some cases. The reason is that wall thickness for plastic parts need uniformity for good injection flow. After a part is designed in surfaces, trimmed, and then knitted, you complete the part by specifying a thickness for the walls. Solidworks will create smooth equal walls throughout the part as long as the radius is not too small. Have a great day! Solidworks since 1997!

[@Movieman1965]

*smooth equal wall thickness

[@officermofiz4600]

A very easy to understand video about a seemingly difficult part! I was actually afraid of surface modelling but after grasping the concepts discussed in this video, I am feeling confident. Thank you. Keep up the good work!

[@Slackker_]

Your videos are always fast paced without missing any details.

[@grainby4072]

IVE LEARNED MORE ON THIS CHANNEL ABOUT SOLIDWORKS THAN AT 4 YEARS UNIVERSITY FOR MECHANICAL ENGINEERING. TY. I LOVE YOU.

[@tkzsfen]

straight to the point, no unnecessary explanations. good job!

[@solidproject9376]

Exactly 😅

[@adamboyle3331]

I’m getting into surface modeling. I feel I’ve mastered all the features and sketching tools in Solidworks but Surface Modeling is just a whole different world in solid works, I feel like a beginner again but it’s fun

[@brandonthesteele]

I have a CSWP and I'm still a little intimidated by surfaces.

[@dino_nuggies875]

@@brandonthesteele how hard is the CSWA exam? I’m taking it at the end of this semester sometime around may. Do you have any tips for me?

[@rtbrito2012]

I'm learning a lot from your videos, thanks.

[@arashrozal854]

It really worked for me after I look and try some tutorials, yours is the one that worked. Owe you a lot.

[@dcjr1053]

I haven't touched Solidworks in over a year. This was a great refresher. Thank you for creating this video.

[@andyjin6657]

Very efficient methods and the example is complex. Helped my Berkeley E26 lab assignment greatly. Thank you.

[@rajtagore6047]

weird flex but okay

[@ddh8624]

@@rajtagore6047 Berkeley's not even a flex bruh

[@add859tankionline]

@@ddh8624 what is why it is a WeIRd flex O_0

[@sphaxxhaps3628]

Very good basics for surfacing as a beginner I found it very useful to grasp how to build profiles

[@phantom462atyahoo]

Your videos have no parallel that I have found. Excellent stuff! Thank you!

[@qozia1370]

Wow! The surface tools are powerful. Thank you.

[@enginstud8852]

12:46 You could not pierce because your plane 1 was not intersecting the segment you chose to pierce to (Your plane 1 was not defined by intersecting the point but by an offset distance to the first plane)

[@ammadshabbir1828]

Thank you ❤ its very easy to understand your videos every time when i watch i learn something new

[@JohnDoe-gv9jv]

I need a lot more work. I was able to make the spoon, but I'm not sure I could do it on my own. I need more practice with surfaces. This was a little hard to remember all of this. Thank you

[@hrishikeshc9474]

Sir, really informative, but without using select manager also the required boundary surface can be created and also because of that you need not have to extend the boundary surface for the end part of that spoon that you did, I tried and I got the required spoon shape.

[@vangalvin]

I have been trying to change from Fusion to Solidworks and your video made things so much easier. Thanks :)

[@alwijeremy6582]

Thankyou for explaining why you need to do certain things instead of just doing it. You're awesome. Thankyou very much

[@anthonytammer9214]

Thank you for this tutorial! It's been three years since you made it, and I only just discovered it. Perhaps surface modeling in SWX is possible to learn after all!

[@LemonTreeNOTfree]

So easy but so hard if without thes video Thanks!

[@JohnDoe-gv9jv]

That is what I think also.

[@neilAneerGAmAI]

You are a legend. This and the other spoon tutorials totally saved my ass.

[@metamorzon]

thank you so much for this great tutorial. I learned many things from your video and I'm keep watching and learning more from you. Thank you again.

[@pardeapsambi9465]

Great tutorial on surfaces. Very helpful for a novice and for the experienced

[@manojreddyambati6000]

I never thought making spoon is this difficult.

[@pangkkie]

this is actually a spoon-feeding tutorial.. hahahaha

[@crunchymetal]

It's actually much worse in real life! LOL Check out Liberty Tabletop where I am the designer/toolmaker.

[@jeanniellewellyn198]

@@crunchymetal omg! But you'd use the same shape for the basic spoon, fork, knife and change the handles? Calavera!

[@Movieman1965]

Hahaha! Before computers and 3D modeling it was even harder to make a spoon! Because you'd have to make so many real prototypes BEFORE the design was approved! Today, you can make several designs and submit for review BEFORE you make a 3D print of the product or part. 3D modeling software has saved everyone thousands of dollars and countless amounts of man hours . I guess you can say I'm a fan after using SolidWorks since 1997! Have a great day!

[@deixaeuteexplicar568]

Surfaces are very very difficult to make

[@fracanapalm]

It was very helfpful to understand some of the logics behind the design. Chapeau Mr

[@الكبيرقوي-س6ل]

YOU ARE THE BEST .. A BIG HELLO FOR INDIANS PEOPLE FROM EGYPT

[@jeffjefferson2676]

Thank you very much! Its really hard to actually draw a spoon if you dont know how. Even though its a daily use item. Greetings, Jeff

[@yoshicasaya]

Thank you so much for teaching... Whenever I got problems in solidworks..I come here!

[@rodblackler6789]

Very interesting, you explain in detail, perfect, I really enjoy listening to your presentations

[@grazynadarowna9642]

I am very delighted to see your videos and you deserve some price

[@ekenefrancisoranusi18]

Very nice work, please professor I have been trying to model that spoon I am on the last stage about to perform the surface trimming, but it did not work it keeps telling me cannot partition surface, the trim tool and target do not intersect. if the trim tool is a 3D sketch make sure the 3D sketch segments are coincident to the surface you are trimming. I dont know what to do again.

[@celianhopkins2929]

Same problem

[@warlord7974]

Go through your sketch it'd be open somewhere

[@vinaygaur9958]

Great sir , I like your way of Explanation 👍👍👍👍👍.

[@welfit3184]

Thank you! I found a surface that was confusing.

[@klingeand]

Hi! Fine tutorial. I have tried going through it twice, but when I try knitting the surfaces, only the two middle ones are knit together, the outer two don't. I have followed the tutorial in every detail, so it seems quite strange. Is there any secret trick to make it work, or is it just a coincidence that I face this twice at the very same point in the tutorial?

[@janveit2226]

I like your videos, because you sometimes make a mistake and when you correct it, it points out what mistake can be made.

[@POLLONATOR22]

great video, helped me a lot to develop a part like this spoon

[@ТКФ-т2б]

i got confuse cause it gone wrong sometime but i learn a lot, thanks sir

[@MegaCheeseycheese]

Thanks so much for making this!! :D It made my homework make way more sense!

[@johnnguyen8665]

Thank you for this excellent surfacing basics video

[@dOgExTylom]

Absolutely no one: KZbin recommendations: How to make a spoon in SolidWorks

[@knowledgecentre2907]

This metod is good using curve rather than spline ,project curve for surfaces. thanks any way.

[@phamthomas6809]

i can't fillet the edge of the spoon. Please let me know what the problem? Thanks you a lot! :D

[@arduinoworldplus4402]

Thank you very much i learnt so many important things from your video.

[@manuboker1]

Thanks! wonderful SOLIDWORKS instructing videos! 😎

[@baretvickery5681]

Thanks, you helped me understand several gaps that I had.

[@manjeetrao4101]

Sir, Suggest me Best laptop for CAD CAM 😀

[@sphericalsphere]

You used a tangent guide to align the surfaces to each other, but there is no surface tangency condition. Is there none in sw or did you just not apply one? How can I check for surface tangency in my design? Switching over from catia.. Thank you very much!

[@SASfeeling]

Thank you for tutorial. Can you explaine how to creat press form for this dimension of spoon and account the flat blank for spoon?

[@uwood345]

When you're making a point tangent, what are you making it tangent to? The point is already shared between two curves Im having trouble understanding it

[@jimakron]

That was new to me too. I usually choose the 2 lines that need to be tangent. But thinking about it, maybe it chooses the lines that are connected to that point. Idk

[@manohargurudu3161]

Sir in the start and end session you are using boundary surface. . Why we are not go with loft....

[@navaneethkaleru6747]

Can we find the developed length of spoon by converting into sheet metal? If possible please guide me ... Thank you

[@riritheone3216]

It’s always a pleasure to follow your SW courses…. 🤓

[@mukeshsuthar8378]

bro What do you do exactly in real life.. are you part designer?

[@mauricionievas6590]

Excelente vídeo, siempre me había complicado con las superficies, éste vídeo ayuda mucho, gracias por tu tiempo.

[@phukjuugle7080]

To all the engineering students. Keep practicing this. School will only have you take 1 or 2 classes on cad but it's super important

[@Wyndu777]

Very good video. I learned a few more things about using surface tools.

[@akash9kh]

Wow! Thank you for sharing! I liked your video and your lecture too. Successfully made. I learnt new arc technique too!

[@cncmillingandturning3166]

Thenk you my brather this is very good lesson.. Klass

[@machineshop4816]

Thank you for sharing! 👍👍👍

[@dumstzzile]

nice, simple explanation nothing to be missed,.

[@omarflores6687]

Respect for you , u are a really amazing teacher , thanks a lot for share your knowledge bro !!

[@janaknepal1]

is it possible to sketch multiple plane in front plane like you did in right plane?

[@ranjeetbagchi7273]

Your video such a good thanks sir lot of things I learn

[@mohammadr.isolated5289]

Hi. Thanks for your teaching, but in the last it doesn't let me to trim surface. It say this error: Can not trim due to error on target body. Why this happened.

[@evelynnaru]

Did you try selecting sketch 2 from the tree manager?

[@kayiplam5525]

There may be occurred undefined in your sketch. The spoon of sketch must be a continuous curve. i.e. fully defined.

[@deenjohnson2542]

I could not made first surface it showing " can not create solid , using solid surfaces. can u help me?

[@jasonchu2627]

it's completely as same as my exam question in college.Thanks!

[@homieknowme223]

I'm getting error on making boundary surfaces. Apparently SW thinks my arcs aren't connect or something. I tried everything. Any help?

[@trazh1214]

were you able to solve that problem? i'm in the same situation. Minute 15:28

[@gyandeokumar2603]

Why are you taking the 3 curves bigger then the actual drawing of spoon??? But I appreciated for the video, it teaches a lot.

[@sumanpatra9455]

i am getting some issues during trim surface...........trim tool is selected but when i take my cursor to remove the material, nothing is happened.......nothing is selected......what i will do ?

[@KidiambokoFamily]

Hi, I could not do the thicken in the the top of the mouse, I wonder why?

[@pradeepgupta1190]

Which processor , graphics card , mother board should i use for solid work

[@robster7787]

It’s 2 months later I’m answering this, but pretty much any mid grade hardware will work. I’m using an AMD Ryzen 3600 with a GTX 1050Ti and A320 Motherboard. These are really cheap hardware. 16Gb of 3600Mhz RAM (2x8). If you want the most recommended by Soildworks, aim for more powerful graphics car and Ram such as a Quadro Graphics Card and 32Gb RAM which can get really expensive. and Intel i5-i7 should be sufficient if you done want the higher end i9/Xeon processors.

[@Nina_2109]

I will try it with Pro E. Looks quite similar

[@dhirensen2946]

You are e great teacher sir

[@hopkinsjr436]

This was so genius 👏🏼👏🏼👏🏼👏🏼 great work sir

[@catkeys6911]

Very nice, clear tutorial, thanks! Just so you know, a couple of times when you said "horizontal distance", you really meant to say "Vertical distance" -no biggie.

[@بكربكر-م7ع]

7.58 can you explain how did u make the ( make pierce thank you)

[@димдим-б7э]

спасибо за предоставленный способ построения модели

[@bibhu4670]

Which software has used ?

[@mjtunstall1976]

Cute! Even it look like inventor both programs follow suit!

[@GuAloneSoLo]

nice i have forget it onc 5 year out from university just 1 clibe 21 minuite the knoledge come back, Thanks bro

[@ДядяВова-э5в]

Дякую! Ви великий Шаман!

[@alwan406]

Hello..can you do this project on Inventor or Fusion 360...just to compare

[@rakeshpawar3319]

Sir Plz make detail videos on solidworks cabinetry

[@santysns8861]

Great video yaar!! By next video please show keyboard also, where we can know what are key u r using!!! Also highlight text video like (shift+circle) etc so it will be more easier for beginers like me

[@andrel449]

Oh my God, love it, love your work, and your channel, keep the good work 😆😆😆

[@rangedacademy3982]

This is very helpful. Thank you!

[@MrStudent360]

You make good job sir👍

[@ferhatkazguc]

Çok faydali deilmi hocam

[@majidnameni9998]

ممنون از این کلیپ آموزشی که گذاشتید

[@arunravi5457]

i cannot turn on realview graphics I followed every steps to make it work. please help my laptop is ryzen 5 3550h and gtx 1650. It is so hard to render a photorealistic image without realview.

[@FletcherHandcraftedGuitars]

Excellent Tutorial, thankyou very much

[@pubglite9000]

Sir please suggest me some best application for 2d and 3d through which I can do practice

[@tutormesin8361]

nice tutorial, very intresting and very usefull. there are so many chance to have a great job if we can master solidworks

[@afifahsarfaraz1494]

Just a doubt, how did you bring the normal, isometric command on the command manager?..please share😊😊

[@mohandoss2385]

In command manager right click to customize , then in commanda menu select standard view then drag normal to icon to the command manager.

[@afifahsarfaraz1494]

@@mohandoss2385 Thank you so much for your help...😊😊😊😊😊😊

[@SuiYanChan]

Amazing video! Thank you!

[@br_u_u_klyn]

I can not create the first boundary surface it tells me cannot create a solid. Use Boundary Surface feature. Any help please?

[@jonathanpreu1741]

got the same problem

[@trexinvert]

At 18:17, can you use Ruled Surface? Instead of creating boundary surface.

[@gmork66]

very interesting videos ... can you help me, I don't have the "real view graphic" option, how can I add it?