SolidWorks tutorial | How to make Allen Bolt in Solidworks

[@telelaci2]

Its worth to mention that v2016 and higher has a built-in thread feature, don't need to use swept cut, but the Thread Feature, that makes things simpler. But for the earlier versions this is useful.

[@CADCAMTUTORIALBYMAHTABALAM]

telelaci2 true its suitable for older version of solidworks,

[@orthancsmorkaingenjorsbyra6009]

As much as I enjoy the film I have to add that using the command "thread" or using a sweep is very intense for the computer and thusly not recommendable for large assemblies. I would highly recommend using the command "cosmetic thread" which creates a callout which you may use on the drawing, but doesn't slow your computer down to a standstill. Best of wishes.

[@Cergun_]

That is one dang beautiful bolt, well done.

[@jarrodvetzel3696]

THank you guts berserk

[@anactivedesigner]

Subscribe me I have cool tutorials

[@tetsuo97bjb13]

The Allen Bolts came in handy when it came to building our robot back when i was in high school in robotics for the FIRST competitions.

[@CADCAMTUTORIALBYMAHTABALAM]

its simple project for beginners.

[@michaelzajac5284]

You mean First Robot.

[@muhammadibrar4515]

@@CADCAMTUTORIALBYMAHTABALAM sir ur tutorial is good....you increased newcomer knowledge....sir kindly will u explain why u took dimensions 6.47/2 during making threads??

[@BIGNESHO]

@@muhammadibrar4515 Wikipedia

[@thegen3kid]

so beautiful, so elegant, just looking like a wow!!!

[@cosmichorizon2775]

❤ Thanks for the Lecture !!!

[@luluuk]

Great tutorial for beginners. Modelling them like this often. The spiral out at the end is a sweet trick for a quick nice thread end. Officially the second (right) triangle for the revolve cut @5:05 isn't correct. This way it also cuts under the straight sides of the hexagon shape.

[@oualid4441]

thank you for this beautiful bolt and your explanation is very good ,continue to make serval video in order to understand solid works thank you

[@anactivedesigner]

Join my channel

[@jasonvandonsel1384]

I do want to point out for the triangle sketch at the 8:39 mark to 8:50 mark before making the swept cut... you didn't mentioned about the height of that triangle being from the ti point to the horizontal line of the upside down triangle sketch because if the height of the triangle sketch if greater then 1.05 mm or larger then your going to get an error because you will then be overlapping the swepts of the triangle sketch and will not get the full helical swept to be highlighted in yellow. so food for thought i guess... try your tutorial again with a larger sketch of the triangle and you will see that i mean.

[@gabrielrebolledocastro9058]

thank you so much!! I was really struggling trying to figure out why in the world it was not doing what it was supposed to lol

[@erdemsaygn3472]

Thank you so much

[@ibrahimarifsoyler505]

thank you so much. I and my brother happy so much man......

[@shaikhabdulrahman2902]

Thank you sir i am struggling also

[@TheDiwannaby2]

Great video. And u explain ur steps very easy, so it isnt hard to follow!

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks, please share our videos which is help us to do more and more in Solidworks,

[@yerr234]

@@michgingras you're english is triple and shod feel bed

[@sandhyaprabhu6996]

@@CADCAMTUTORIALBYMAHTABALAM I am recommending everyone around to refer your videos for S.W. Always concise, easy to understand even for people with no modeling software knowledge. We all need a Teacher like you sir.

[@sthakshay18]

Thank you for this lesson.

[@engineerdrawing6039]

liked it, i prepare to design it on my channel

[@m.alwahedi95]

Thanks. How do I choose this shiny steel material that is close to reality? I tried and did not find the same.

[@xl000]

Threads are cut on a lathe or pressed with a specialized tool. It's not like he's going to send the bolt to be cut on a 5 axis machine anyway, so I assume this is for Viz only.

[@abundancetv8389]

Nice! And what would be the next step to create it in real world? What printer or tool would you use?

[@simonpaoloararao8489]

Round bar and then you manually file and shape it

[@jennysqueo3704]

One questions sir , inner circle of m8*1.25 = 6.75/2 ?? Or 6.47/2? I have doubt

[@xl000]

just have a look at the page Filetage_métrique on Wikipedia

[@kopipahit199]

Please give me advice for common settings to my Solidwork as easy to use it like yours!

[@narindersingh1293]

Thanks for this information

[@chrisblight6069]

Very nicely modeled allen bolt. As an acedemic excercise it's great but I wonder if it's practical to have bolts of this quality and complexity in a large assembly. Can you imagine the load on the GPU if you had fifty of these in a large assembly? I did a few of these in my own small assembly and kept them very basic, no helical sweep, just diameters and extruded cut hex. They work just as well.

[@alldesigntool7973]

kzbin.info/www/bejne/sGi1kHV8ZbZ4aLM

[@virendralad5127]

How to create standards parts like Allen bolt, chainwheel, gears, hex bolt, gears with the help of formulas(for their dim.). So we will create it very fast. How to edit standard part of design library.

[@JagadeshRaoThalur]

I'm almost done, but when i choose swept cut to choose the path for threading, first it's not showing full thread and error message when i click tick mark is "the feature failed to cut the body". what should i do?

[@pakarmyisizindabad6206]

Besutiful allen bolt

[@mohammadimran144]

thanks for this sir ! can you tell me which software is best in 3d modling like inventer, solidworks,nx,catia ?

[@jarrodvetzel3696]

Solidworks is industry standard, and in my opinion easiest to learn with most options.

[@swaranas5908]

Nice

[@marceloaversa4409]

thanks a lot for all your videos im learning a lot!!!

[@anactivedesigner]

I have solidworks tutorial too Subscribe me

[@prashantkumar-be1xv]

thanku Sir

[@vasudevraut524]

Thank you sir Sir thread k liye path dimension kaise calculate karte hai plz tell me

[@mazharsener7234]

Thank you for your effort

[@SaurabhSharma-su2yx]

What's the relevance of 6.47/2 in sketch 5? Why not direct 4mm-Chamfer= 3.2mm?

[@sparkus4229]

You're good at it! Great and useful!

[@anactivedesigner]

I have free tutorials Subscribe me.

[@david2881]

What machine to use to make this?

[@siphilipe]

Almost the supersonic speed of my teacher. Anyway, thanks for sharing.

[@STOP532]

Good

[@tim_kk7851]

I can't do the last step when I'm trying to do Swept Cut. Plz help to fix this problem, thx

[@jarrodvetzel3696]

I don't know if you solve yet but make sure in the "sketch profile and path" part of the swept cut options, your sketch profile is the small triangle you made and your sketch path is the helix reference you drew. Good luck!

[@jessefonarcus]

The last triangle height should be less than 1.05mm

[@Rising_Ballers]

Jesse Fonarcus ur right

[@Rising_Ballers]

Jesse Fonarcus but why ???

[@MrJameslb3]

@@jessefonarcus That worked! I was getting so annoyed. Thank You!!

[@raveendrawickramasinghe7213]

How did you come up with that value 6.47/2? What if I need to make a bolt with different thread? Please explain.

[@MECHANICALRocks]

STANDARD VALUES

[@nordinenordine7858]

thank you for these videos that share. Could you make a drawing with a representation of the thread with isometric view by appearing the thread on this last, please

[@kimtienthanh5261]

Thank you sir for sharing

[@akshaykapoor1965]

thread cut is not applied means sweep cut is not applied i dont know why ... i have 2019 solidworks software ..and i am unable to sweep cut applied in this allen bolt can u tell me why this happend to me

[@inwarhammer8494]

Same thing happened with me

[@deepseadeepsea7243]

Thank you

[@rushikeshbhalerao6904]

Which graphics card are useful for this work?

[@hamzaouinidhal8101]

Nvidia Geforce gtx are good; i m using one

[@kamiliameziane4536]

Thanks

[@hampymarkarian6819]

Last step; i have Rebuild errors (Sweep operation failed to complete) any idea ?

[@Rising_Ballers]

Hampy Markarian same dor me

[@Rising_Ballers]

What to do

[@anactivedesigner]

Subscribe me for free solidworks learning

[@channelsport6757]

hi thanks for your tutorials, i wana to do a project of house machine works interiorly that the machine create in solid work and how to be the house interior design in solid work pls help

[@anactivedesigner]

Subscribe me for free I have cool tutorials

[@sesarman]

Allen bolt has never looked so "beautiful" lol

[@anactivedesigner]

Subscribe me I have cool tutorials

[@mrgallbladder]

It's called a socket head cap screw.

[@scientist100]

I tried this before and this time again but it is giving me an error (pink lines on spiral) and it does not do the threat sweep cut. Any idea of what could it be? I tried many ways but still the same thing. Thanks!

[@scientist100]

I found out that the distance is important, it would not cut if I put 3.24 instead of 6.47/2 that you used. Problem is now solved.

[@CADCAMTUTORIALBYMAHTABALAM]

yes distance is important.

[@guillordz]

I have the same problem, but I put the 6.47/2 and the problem still, any help?

[@guillordz]

Done, my triangle was too high.

[@jessefonarcus]

The triangle height should be less than 1.05mm

[@atoztech8859]

which lap top is best for solid works

[@buddydog1956]

ha ha...or XXNX will do too ~

[@homeschoolaccount2608]

a Lenovo should be good because that is what i use

[@AvikBiswas]

Why did you convert entities @6:05 minutes?

[@pookab5905]

can they be saved as a dae file ?

[@ssebitaabawamala6861]

You are the best

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks for watching i hope you enjoyed.

[@CJELCJEL65]

at the 5:50 I do not understand why you make the two triangles ? and 8: 00 why you did another triangle ?

[@ojas.rastogi]

at 5:50 two triangles are to make a finished surface on the allen bolt head. at 8:00 the triangle is the cutting tool like in machines that will cut through the material to produce the threads. You can also use square instead of the triangle shown at 8:00, that will make square cut instead of triangle.

[@SaurabhSharma-su2yx]

Why we are doing revolve cut at 6 mm depth? what's it's significance

[@АзХашми]

David Husmann Chill. He’s just asking

[@MECHANICALRocks]

MAINTAIN THREAD DEPTH - UC4a5VW2SbtCgj7pU4q1EPKg SUBSCRIBE THIS FOR NEW DESIGN AND LEARNING AUTOMATION

[@yingshanlim8363]

How to make a text '12.9' on top of the cap screw?

[@motivationalasraful2517]

Super 👍👌👌👌 Sir ❤️

[@TAINTEDEVOL1]

CAN YOU SHOW HOW TO MAKE A 4 PRONG TEE NUT ?

[@ardoos]

9:05 choose the path TOU select this path

[@anactivedesigner]

Subscribe me I have tutorials

[@shafayathossein4429]

awsome bro..

[@keshaborja8564]

If you want to make your own woodworking yourself just look for woodprix website. There is all you need to make it :)

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks.

[@keshaborja8564]

welcome

[@arcurisano2898]

I LOVE THAT

[@varunvarundm4642]

Sir, who much cost of solid work software.

[@armyson1157]

Varun Varun DM 4000 dollars 😂

[@MECHANICALRocks]

3 LACK IN INDIA - UC4a5VW2SbtCgj7pU4q1EPKg SUBSCRIBE THIS FOR NEW DESIGN AND LEARNING AUTOMATION

[@babakkalantari7843]

Good job

[@jagjivansingh7150]

Sir please powershape ka vi totrel start kre pls

[@manuellando2060]

Thanks.

[@anactivedesigner]

Yo✌

[@BILALAHMAD-bd8rl]

There is no threads when i apply swept cut

[@MrHarsh-fr2fq]

Mine tooo

[@phoenixcreations94]

amazing

[@lostallmymirth]

It must be scary to be sitting in the middle of a busy intersection. Aren't you worried your Solidworks will be damaged when you get run over?

[@JagadeshRaoThalur]

then i fixed the path as i found the error i made, now the new error message is "sweep operation failed to complete"

[@balamurugan-fi8dh]

i m getting rebuild error , solution please ? advanced thanks .

[@abdullahum6422]

me too , the last step

[@TheMo7trm]

you are great!

[@alokbaranwal4547]

dear sir please makke a video simple type allen key design

[@SKRIANSI]

Mr Alok Baranwal ,can you visit my chanel. Thax

[@maheshwarreddy1074]

How install window7 solid works Anna Super annA

[@jidianhuo]

easy

[@aerospacerc7700]

Can you tell the people outside to turn it down!

[@kartiklambole2772]

Good done #DESIGNMANSION

[@ashwinkumar4168]

Sir swept cut not working

[@HarSHGupTa-xz2pt]

Nice sir..

[@MdsafiAlam-xw4ki]

How can download SOLIDWORKS software in laptop please help me anyone bro

[@kandasamyrajan]

Thanks for the video.

[@AnkushSharma-il4xf]

Not able to make both angles 30 degree one is going to 60 degree driven

[@KobraVR]

You are amazing!

[@anactivedesigner]

I have solidworks tutorial for free

[@ing.juanismaelgomezromo6926]

and the library?

[@bezechange2634]

keep it up..!!

[@danhyde7501]

this doesn't seem accurate as you didn't dimension the cutout triangle? and the threads therefore have flat tops?

[@safiaramdani4366]

I want the download SolidWorks but I can't

[@mrharsh2845]

sir Creo -(pro-E) me sikhaye...please

[@anactivedesigner]

I have free solidworks tutorials Subscribe me

[@ff_iitrah9884]

khairunnisa ahmad rusli where are you ??

[@mostashiibraheim2630]

😍

[@yugautogeirej3099]

Bhai Hindi me video banao tabhi shamj me aayega aur aapka video gro karega

[@innocentpreet100]

dear sir kya featurecam mil Sakta apse

[@innocentpreet100]

dear sir that i can get a featurecam

[@anthonydelgado2430]

I can make a many things on solid works and I'm only 12 I have a computer class at school and I have a A+

[@АзХашми]

👏🏽👏🏽👏🏽

[@uakshay3549]

When I do revolve cut it s not working

[@anactivedesigner]

Subscribe me for free solidworks tutorials

[@xdygmnyrdf]

Fusion 360 is so much simpler, in my opinion.

[@nabil97ful]

Why 6.47/2?

[@CADCAMTUTORIALBYMAHTABALAM]

Actually the dimension is 1/8 inch & its 6.47/2 mm with tolerance,

[@parthnikumbh1202]

Is 1/8 inch as 6.47/2 with tolerance has any relation with Allen bolt dia 8 mm??

[@RajuRaju-fu4tl]

how to make rc car engene ????.,.

[@xl000]

"wertical" at 3:50 Anyway, I was able to do this on 3d studio when I was 12 years old with no knowledge of mechanical stuff, no manual for the software and no one to explain it to me. Times haben gechanged.

[@chediamor3607]

well done, here is a cola

[@anactivedesigner]

I have free tutorials Subscribe me

[@anactivedesigner]

@@chediamor3607 I have free tutorials Subscribe me

[@sajipthasamaraweera4531]

swept cut didn't worked..😑

[@useless9771]

_Okae_

[@faiyazahmad6940]

English 👌👌🤐🤐

[@nietzschean6987]

yr ye horn tu band kar vao background main

[@nelsonsaravia3526]

Too many step for a single bolt screw.

[@basavarajagc5661]

Sir give me software

[@basavarajagc5661]

[e-mail]