AutoCAD Drawing Tutorial for Beginners - 1

[@jayadevik.anathan5509]

THANK YOU SO MUCH. I feel so lucky and grateful to subscribed to your channel.

[@ashurzh6758]

Really good tutorial. I don't know why but other tutorials miss crucial steps. This is saving hundreds of hours of frustrations by going through this tutorial and I understand how and why you do each step so it is not blind rote learning.

[@zeeshanahmed2594]

Tracking 03:07 Circle centre track 04:26 05:15 Parallel snap 09:18 Shift+ right click to see list of tangents.

[@Adityakhuriwal]

Giga chad

[@muhammadahmadahmad285]

Hli

[@abdulsalamnoormohammed7195]

Thank you very very much After 30 years gap I again getting very nice explaination Thankx ones again

[@CADCAMTutorials]

You're welcome 😊

[@vivekjadhav3594]

Feel like just wasted 5000 rs on auto cad class ,on KZbin teaching method is too much good i like way of teaching

[@CADCAMTutorials]

Glad you're finding the tutorials helpful!

[@sidharthyadav1202]

Video is very helpful for beginners... explanation in very crystal cut form❤

[@jumpertechnology8245]

Thank you Engineer really is helpful and super simple let me thank once again your lecture is super presentation I have ever come across

[@danielvazquez8966]

Hey man thanks for the course, really really nice, for those watching you can put the speed to 1.75x and it's still very clear, just if you wanna save some time.

[@richman3322]

Thank you very much indeed! I really appreciate how you explaining the lesson!

[@CyberLinkComputers]

Very Good Method of teaching . . . Thank you for this video Best of luck

[@CADCAMTutorials]

You're welcome 😊

[@qaweemahmad3328]

PEACE BE ON YOU. WELL DONE BRO. KEEP IT UP.

[@CADCAMTutorials]

Thank you 😊

[@SarathKumar-kl5vs]

thank you so much for the tuitorial sir... nice and easily explained... heartly thankful

[@CADCAMTutorials]

You're welcome 😊

[@farl.796]

Easy to understand. Thank you!

[@CADCAMTutorials]

You're welcome 😊

[@renukakispotta9917]

Excellent explanation....easy to understand....thank you

[@vasanthkumar3640]

Best one dude ...keep rocking

[@KimJongDeux]

1min in and its already better than my teacher ffs

[@CADCAMTutorials]

Thank you 😊

[@SyedIzaan-x1c]

True ❤

[@reynaldobatiduan5514]

thanks brother it helps me a lot

[@CADCAMTutorials]

You're welcome 😊

[@jisoolisa9560]

I just created my own drawing so proud of me, thank you, this really helped me ❤❤❤❤

[@CADCAMTutorials]

Great job!

[@erzcav4793]

Yey. Im re learning this autocad this lockdown. Thank you!!!!

[@dennys008]

thanks for the info really helped alot. i rather learn about tNice tutorials than school

[@syedsarfaraz3417]

Thank you for such awesome videos and excerises

[@CADCAMTutorials]

You're welcome 😊

[@malekelaurent]

Very nice , congratulation Bro

[@CADCAMTutorials]

Thanks a lot

[@taslimaburondkar5767]

Thanks for make it easy for beginners

[@CADCAMTutorials]

You're welcome 😊

[@vithpho7851]

Hi teacher ! Thank you for your videos sharing it's amazing knowledge as my channel in Cambodia

[@CADCAMTutorials]

You're welcome 😊

[@vishnusonawane7042]

How to use parallel line and extension line, great demonstration for complex part

[@CADCAMTutorials]

kzbin.info/www/bejne/aJ_MYXSNl9Gih6M

[@panchora99]

This video derserves more likes.

[@CADCAMTutorials]

Thank you 😊. It means a lot.

[@amrutapatil2251]

Amazing

[@CADCAMTutorials]

I'm glad you think so!

[@EddyCael]

Thanks for the tutorials, I am learning a lot

[@priyarathour3874]

Awesome 👍🏻

[@CADCAMTutorials]

Thank you 😊

[@Raju-we6ow]

Dhanyawad guruji 🙏

[@CADCAMTutorials]

You're welcome 😊

[@princesslife1530]

AWESOME! This is very helpful!!

[@sew_wee_side7027]

My hero

[@abellajannamarias.5694]

Thankyou for this guide I really appreciate it

[@CADCAMTutorials]

You're welcome 😊

[@shreyasmathuria732]

Sir After selecting "Center, Diameter" for circle when dragging on the line (as shown in video) it doesn't show midpoint, instead endpoints are highlighted on both lines (vertical & horizontal lines). On right clicking and selecting midpoint, it does show midpoint on both lines but, both lines midpoints are not intersected with dotted line to show center of the circle. What to do? I use AutoCad LT 2020 thanks

[@CADCAMTutorials]

Make setting as per this video kzbin.info/www/bejne/boCwlJ1_fK2XfMk

[@shreyasmathuria732]

It worked

[@mahumabdali5652]

Thanks for this great video

[@samarthnimbalkar6048]

Nice Sir 👍

[@ishiniwathsala7772]

Thank a lot sir 💚

[@mdfaizan2819]

Sir which type of software laptop used for autocad program please tell me which generation laptop need to learn autocad

[@limiraju6880]

Best class

[@abdulashraf5186]

Best teaching

[@mubasshiryunus2241]

Great

[@sima4970]

in 5:21 how did you give the circle a height of 80? i cant do it

[@CADCAMTutorials]

Track mid point and specify distance of 80

[@marymnyanda9929]

Good ticher

[@CADCAMTutorials]

Thanks

[@NicholasMawadriAkuku]

you a gift from God by creating lectures. How do get in conduct with u for further consultation, including MATLAB?

[@abdelhakimanflous4583]

thnk you man actually i have that problem of making sure of the midpoint in first draw

[@shazalmohamed6299]

did you got a solution for this problem

[@CADCAMTutorials]

kzbin.info/www/bejne/boCwlJ1_fK2XfMk

[@michaelsrowland]

At 1.40. What do you press to enter the length? Also what do you press if you want millimeters?

[@rufussewel4553]

thanks for this beautiful presentaion.

[@anjulashrivastava9450]

Sir i am unable to point centre in the right corner square to form circle

[@zeeshanahmed2594]

Excellent explanation. Thank you Sir

[@AJ-et3vf]

awesome video. thank you

[@CADCAMTutorials]

You're welcome 😊

[@sharathalex7288]

In Circle drawing i am not getting the centre point automatically like yours am using 2018 autocad can u solve that problem.

[@CADCAMTutorials]

Same logic for center point: kzbin.info/www/bejne/mmfRaXtshd-tfas

[@sharathalex7288]

No i got it in snap settings. And nice class sir thanks for ur efforts

[@CADCAMTutorials]

You're welcome 😊

[@florenciocadungog481]

What is going to press to specify the angle after putting 135?

[@CADCAMTutorials]

TAB

[@michaelsrowland]

Where is the previous video. There is no link

[@adamramadhn5473]

super good

[@samarthnimbalkar6048]

Thank you so much sir

[@udayshankar7906]

Sir when I am press TAB button it takes ok/enter in that what can I do

[@mujahid6037]

What is the difference between diffrent auto cad versions like 2020,2014 etc??

[@arghabanerjee7301]

Thank you sir :)

[@amanchaturvedi6124]

Thank you 😊 🙏

[@triangle379]

when i change from model to layout the image is very faint on white background what should i do to make it visible darker?

[@damilolaowolabi6716]

Im using the free version to learn and most of these additional shape features doesnt come with that version

[@aartikumhar0755]

Hello sir , in 2nd drawing the angle can be shown is automatically , what to do to see that angle?

[@CADCAMTutorials]

Make polar tracking ON: kzbin.info/www/bejne/f4aakpqQqb6FpM0

[@lsart3ddesign883]

Very helpful

[@RINASNASMI]

Why mid point showing for me. When i put pointer on there

[@CADCAMTutorials]

kzbin.info/www/bejne/mmfRaXtshd-tfas

[@RINASNASMI]

@@CADCAMTutorials thanks

[@the_Vengence07]

thanks 🙏🏻

[@kamyagupta4030]

thank you

[@CADCAMTutorials]

You're welcome 😊

[@salluriganeshsvg]

How to set a limits for civil engineering drawing and what type of units i have to take...for that

[@CADCAMTutorials]

kzbin.info/www/bejne/o6K9c5mrftmqf6s

[@Suhanasethi29]

Circle is not able to locate the midpoint? Why

[@CADCAMTutorials]

kzbin.info/www/bejne/mmfRaXtshd-tfas

[@subbegowda5282]

Sir the centre point is not tracking at all in my pc 2016 version autocad

[@m_z4287]

can u tell me what kind of configaration pc we need nto run this softwear

[@mostafashahriar2261]

Core i5 8 th/ i3 10th gen or above 8gb ram Ssd as system drive. That will run fine i guess.

[@edgardoignacio7232]

How about for printing this into paper? will i get the actual measurements?? Thank you!

[@CADCAMTutorials]

Yes.

[@edgardoignacio7232]

@@CADCAMTutorials Thanks bro. I am studying AutoCAD again. Your uploads are great.

[@anjalibain8]

Sir the angles from the horizontal lines are not tracing in my PC so the whole drawing is getting another dimensions what should I do can you please tell . I also wanted to know how the tracing scale for lines and angles are showing.

[@CADCAMTutorials]

kzbin.info/www/bejne/iYHQf4NupplqgK8

[@anuragshrma9582]

Hi

[@sachinmane.]

To make the new drawing you have said to click on plus button how to bring that tool bar. Drawing 1 , drawing 2 , drawing 3

[@CADCAMTutorials]

What is your AutoCAD version

[@WaqasAhmed-th4lo]

Bro how to pan screan mean how to drag down drawing while dragging the cursor sign makes a sign of hand tell me how to drag ...... i was actually questioning about that

[@CADCAMTutorials]

Press middle mouse button and drag the mouse

[@WaqasAhmed-th4lo]

@@CADCAMTutorials middle.......?

[@CADCAMTutorials]

Scroll on mouse

[@WaqasAhmed-th4lo]

@@CADCAMTutorials laptop dont have midlle button guide me about laptop's mouse

[@autocadkgtopg2031]

@@WaqasAhmed-th4lo You have to type P followed by enter. The cursor will changed to the hand. You can pan the screen. Actually the P means the PAN.

[@MEVISHWANATHKR]

Are u legend

[@SukhpreetSingh-nf7ib]

I have autocad 2013 and m not getting that tab option while selecting the angle, vry difficult for angle selection

[@CADCAMTutorials]

kzbin.info/www/bejne/iYHQf4NupplqgK8

[@МихаилРуссу-и7и]

In the last drawing, the two lower tangents intersect with each other.

[@PrashantKumar-bi9os]

sir my midpoint is not getting tracked i am not able to select two midpoints at once

[@aiyemanahmad8696]

press F11 with F3 to get reference lines

[@SANJEEVKUMAR-xj4lh]

How could i find midpoint.. it is only show the end point

[@CADCAMTutorials]

Here is solution: kzbin.info/www/bejne/mmfRaXtshd-tfas

[@rajjoshi2685]

lovely, really beneficiary, urs is very easy method of teaching and i got good knowledge

[@peterburbery2341]

Can you make a video on how to find constraints and use locking dimensions in the Parametric menu.

[@CADCAMTutorials]

kzbin.info/www/bejne/b4e7l2iphLuVe7c

[@smitgohil4309]

Sir i can not open tamplets please give solution for that

[@devendrabakhshi179]

How to down load this software on my computer

[@mubasshiryunus2241]

❤❤❤

[@kumaramit5202]

Gud evening sir . I want to asked about AutoCAD . May you help me sir ?

[@Uneebyaseen]

Can anybody tell me where from i can learn it all in feet and inches

[@CADCAMTutorials]

kzbin.info/www/bejne/p2SvgXyNjc59qbM

[@shoaibmohammed4807]

Is dis teaching for mechanical students.. please reply if yes den I wanna start dis course..

[@CADCAMTutorials]

Yes.

[@SenayAdeme]

where is the link to the drawings dude?

[@hridankipaul983]

Midpoint kaha se laye bhai?

[@CADCAMTutorials]

kzbin.info/www/bejne/d5esgJSkp5eal7s

[@hridankipaul983]

@@CADCAMTutorials wow!thank you

[@caligula2456]

Hey bro, I really would like you to reply to me because it's so important. I didn't get why did you wrote either 135 or 45 or nothing as degree

[@caligula2456]

@@CADCAMTutorials could you please explain more? I'm a bit poor at solving problems related to mathematic and geometry maybe that's why i can't understand. For example,you wrote 45 degree in one side. But in the other side you wrote 90+45=135. Why?

[@CADCAMTutorials]

Have you used geometry protector? It is the same. Angle measurement starts from right side i.e. zero degrees and increases towards left. Therefore if you want to go in 45 degrees in left side you will have to add it to 90 to workout total angle.

[@caligula2456]

@@CADCAMTutorials didn't you mix right and left?I mean the left side you mentioned is right to me

[@caligula2456]

Actually,if I'm not mistaken i got it. So,the letf side of the right will be decrease,and as well as the right side of the left. But the left side of the life and the right side of right will be increase.

[@michaelsrowland]

At 30 secs what is the word he is saying?

[@nikhilmane6930]

thank u sir

[@Ravi-ey1hl]

Sir... mid point is not getting highlited for a line sir!!

[@CADCAMTutorials]

Make midpoint object snap ON.

[@Ravi-ey1hl]

@@CADCAMTutorials thank you sir

[@andrii_voznyii]

Check the tangent lines under the big circle. Its incorrectly done

[@sayandas5587]

sir, how can i show the measurements of my drawing?? just as it is shown in the sample drawings?

[@CADCAMTutorials]

kzbin.info/www/bejne/q5SpnpRtiMyNbZI kzbin.info/www/bejne/e4LHeJyFar2nb7c

[@sayandas5587]

@@CADCAMTutorials thank you sir

[@Civilblueprint]

Why my 100mm is showing larger but not your ?

[@CADCAMTutorials]

Use acadiso.dwt template

[@Civilblueprint]

@@CADCAMTutorials in 2007 how to use

[@युवाकांग्रेसदेवभोग]

Same problem with me

[@CADCAMTutorials]

Use acadiso.dwt template and don't use acad.dwt template

[@thearcram]

How to find the centre for second object I'm having trouble

[@bassim3amer187]

By activating the object snab by F3 from the keyboard

[@sufiyansurve5768]

Sir units meter nhi rakh sakte

[@CADCAMTutorials]

Rakh sakte hai.

[@sirrodaquino678]

Very nice tutorial... Sir, where can we download the exercise files?

[@onurkustemir1604]

Does anyone know how to do tangent line between two circles for AUTOCAD 2021