CATIA V5 SHEET METAL PRACTICE DESIGN 1 for beginners | CATIA Practice | CAD Designs

[@hms1688]

Good work!!! We also have rich experience in sheet metal fab, we are a strong manufacturer in China, with high quality and competitive price.

[@rakshithashwath]

Very Nice Video, i was expecting the Unfolded version of it at the end

[@shadowlight5627]

It's nice to have catia tutorials to learn or refresh your memory. But there are irregularities in the design process. Or rules to follow to guard against future problems in case of modification of the part. which happens very often. You have to create a geometric set that allows you to store non-physical objects, to avoid polluting the tree. They should be renamed clearly if possible. It is necessary to refrain from using physical object to pose its sketches or these contours. Because they are modified or deleted this will create errors to be corrected. We notice by creating an unfolded at the end that a part has not been done correctly (15:56). To do this well, you need to make a longer flanged edge with a cutout rather than adding material. You have to get as close as possible to the creation of real life pieces. When we make this part on a folding machine we cannot add material. Except with the thickening file ... To finish, in general it is necessary that a sketch is not stuck on the profile via a coincidence, it is taken from catia V4 where one could have problems of microscopic holes. I hope that my comment is sufficiently clear being French ... Good continuation.

[@kamahami7]

Hello sir, would it be possible to ask you for one advice regarding sheetmetal design and manufacturing? Since i faced one problem on current project that im working at 😅

[@swapnilbandgar5477]

that is very good video... well explained... kindly revert with drafting of the same component... i,e. flatten view... thank you

[@Ganesh-bp6sr]

Superb explaination sirr ❤️❤️❤️

[@dhayalansmart6741]

Thanks for the awesome teaching!👍

[@CADDesigns]

Thanks for your feedback...! You are welcome Dhayalan...!

[@murugesank2233]

superb video sir. pls give the exercises in sheet metal for practice in pdf doc.

[@mojtabaemami2291]

Excellent video. thank you.

[@CADDesigns]

Thank you! You are welcome!

[@flored4606]

To everyone who can't select multiple edges, for "wall on edges". This is a new feature of Catia V5 R21 it's not working with previous releases.

[@vaibhav3126]

Ohh thanks...I thought what's wrong with my catia

[@Data_science_with_genAI]

Thanks for explaining so good 😊

[@CADDesigns]

Thank you...! You are Welcome...!

[@siemenscadsolutions9994]

useful video

[@alirezaghorbanali1195]

👌

[@CADDesigns]

You are Welcome...!

[@CADDesigns]

Our all videos practice drawings are available here👇👇👇 caddesigns.in/mechanical-pdf-practice-drawing-sheets/ You can follow this website for all practice drawings and AutoCAD Blocks

[@PANDURANG99]

there should be relief at the bend

[@cristif92]

is there a setting for multiple wall on edge ? I can not select more than one edge

[@CADDesigns]

Use Ctrl for Multi selection Cristian Florescu. Thanks for Watch...! You are Welcome...!

[@dogoargentino959]

No salió igual al plano original. En la vista inferior del plano, el segmento del medio a la izquierda de los agujeros, penetra hacia el centro de la pieza que no tiene cota. Eso no se dibujó en catia.

[@batugurses3622]

i am trying to create multiple walls on edges but ctrl seems not working

[@Davidpackard6173]

I have a question... when I do the develop on plane of all, it developed all except the feature wall 2 tha remain in the same position..I would like to know why?

[@hamedchegini9388]

@Moreno Ferrante tnx its works

[@PANDURANG99]

One cut remaining

[@manojsahu-qx3pj]

AT THE TIME OF LECTURE ,I THINK YOU ARE DRINKING WATER.SO THROAT IS NOT CLEAR TO LISTEN.TRY TO RECORDING WHEN THROT WILL BE CLEAR.

[@CADDesigns]

Noted. Thanks for your feedback Manoj. You are Welcome...!

[@slimsintanto]

It's wronge. It dosen't match the 2D but great vid

[@CADDesigns]

May be little bit changes, Follow drawing sheet for perfect dimensions. Thank you for your feedback...! You are Welcome...!

[@CADDesigns]

Follow this link for sheet: m.facebook.com/878497132219416/photos/pcb.2158985540837229/2158985427503907/?type=3&theater

[@sofiensaw5576]

It happend to me to, double clic on the part that does not stick on the reste of the sheetmetal, then select the face that is tanget to it in the window that pop up, that will fix it.

[@rinkuthakur2888]

@@CADDesigns how can we check dimensions after completion , so that it can be verified .

[@untuksamsung1538]

Ada link downloadnya om?

[@swapnilbandgar5477]

part drawn in 14:27 dont come in unfold view... so model and drafting will not match...

[@deepan1271]

What to do in that position

[@shaikhtabish7802]

You have not made a cut between two flanges

[@CADDesigns]

Yes Shaikh, I forgot that. And, follow our blog for this full drawing sheet: caddesigns.in/sheetmetal-catia-practice-design-with-drawing-sheet/

[@akshaygajbhiye6613]

You providing incomplete knowledge