Cadillac cts double din install prt2

[@malikrobinson6495]

Imma say this to all the naysayers man ime very knowledgeable but reguardless how you feel about the electric tape and wire type he uses…..use the info he’s offering and use your preferred methods…. He showed how to make it run…and its running….better than others could display and its rather simple. Use your wire taps,heat shrink and soldered connections, but the man is a gold mine with the info he just gave us for free💯

[@tonifanguy3268]

I did this on daughters 04 CTS with a pioneer Avh280BT dbl din and never installed car stereo before. I was able to retain my d.i.c.! I had a minor issue but when I reached out to Hudsonb11 he actually took time from his life and called me. Walked over and double checked everything with me! Videoed with me so we can troubleshoot. Not only did he save me money on all the connection parts you don't really need he actually acted as my personal installer when he helped me and did it from pure kindness! I can't thank him enough!!!!!! Thank you soooo much @Hudsonb11 !!!!!!!

[@Hudsonb11]

Toni Fanguy... You are so very welcome

[@helpyourneihgbor]

I love my 2004 SRX and the fact that i would loose my dic to put a double din was a bummer. Thanks to you i ordered everything i need and am exited to install. Once again thank you for putting this out there.

[@alexg2022]

I'm going to try and do this myself thanks for uploading this video.

[@syxspeed]

just finished. amazing!! 100% only video on KZbin I benefited from!! thank you soooo much!

[@lesliecoleman2314]

Hey man how did you lift your car for the rims i need tp lift mine bout 3 inches

[@trinidadnabor8807]

I just bought a 2007 Cadillac CTS with 92,000 miles I was looking to do something it like this 👌👌👌

[@mstangfiveo]

Thank you very much for the instructional video. I was able to get everything hooked up and working. The tough part was cutting the original faceplate and the steel radio housing.

[@MichaelSmith-xo6li]

Great work bro! This is advance professional grade information made simple. I haven't gotten around to the radio yet, just got the car not long ago. Love the dam thing. Never owned a Cadillac before. And I'm from the hood too!? Everybody has one, older models, classics, some newer ones. CTS's in my opinion are the coolest of them all. I wonder if these people know the info your giving out here usually cost money. I appreciate it bro.

[@cwolf297]

Good video, I upgraded my sons cts, with a touch screen. Wish I would have seen this before buying a lot of un-necessary items from the online electronics store. I agree with all your wiring, except for the red accessory power hookup. Do not power up stereo that way. If you remove panel underneath the steering wheel, move wheel all the way up, you see a wiring harness going to the ignition. You can connect the red line to the dark brown wire. It’s the second to the bottom, on the connector. It comes on, on the first click of the key.

[@erniecarrasco9107]

What about his original subwoofer. Wasn't that connected to it's own factory amp and to the actual radio harness all together. And why does his amplifier converter on use the positive and negative from the left? What if he just connected both positives and negatives from each side, right and left?

[@erniecarrasco9107]

Also, what about his amp remote wire. Where should he hook that up to? Does it have to be connected to the radio on and off switch red wire?

[@jeromeshockley9572]

Thanks for this video man. I'm about to buy a 06 Cadillac CTS from a friend and was planning on getting a aftermarket head unit installed. Once again, thanks.

[@dhnova2]

Good home job imma just copy your setup trying to put a double DIN in my girls caddy that I just got her and I want to be able to have DVDs in the headrests and shit so thank you for the video

[@jlrockafella]

Thanks alot brotha👍 this was exactly what I was looking for man 👌

[@SpensorKnitter-sl7vq]

Does this bypass the factory amp or will it still be using the amp to power your speakers

[@JC-yd9db]

ok so I finally got my unit, going to install this weekend, keeping my fingers crossed

[@lani2111]

dis video just made my fuckin day...

[@adamzaloga9679]

im doing this for the 2nd time, first was too long ago for me to remember. thanks for quick explanation. ps. your head unit most likely has a remote out on it, so you dont have to tap rear fuse panel.

[@Hudsonb11]

problem is I took it to several shops like you who claim to be "professional " end result it couldn't be done and retain the dic... but as you see it can... I also see alot of "professional" checking out my video... keep doing what you doing and what you "professional" can't get done people bring it non professionals like me...better yet I'll troubleshoot for free post a video and still get paid😉

[@TheBMiester]

Hudsonb11 exactly. All the shops are trying to sell the $100 module to retain the dic. When I ask about a simple harness so I don't have to cut the original harness they act like it doesn't exist

[@Hudsonb11]

for all you "shop" and " professionals" stay tuned for my next videos... adding 10 inch tablet... remote start/alarm... if you paid a shop $600 plus you paid to much

[@Hudsonb11]

Pretty much follow the factory lines on top,bottom and sides! You'll probably have to do some extra shaving on each side to get aftermarket unit to fit... be sure to stay below the buttons at top... Glad video helped you

[@phyzaan]

Whats your email bro

[@bluefeathercalnimptewa4307]

For amp remote wire could I run it by itself to the fuse behind driver seat??? Or would I needs to run it from the stock cts radio instead"... ? And my fuse says CCP that I'm going to tap wire into for remote wire for amp. Thank you it worked now I got bass...

[@Hudsonb11]

Yes that’s perfectly fine

[@lilricrick]

Did mine last night, thanks bruh!!!

[@syxspeed]

this helps alot thanks bro. I'm about to cut the hole for the new DVD. any pointers on lining it up?

[@1shotz0]

Aye bro how did you extend that red cable to the hvac also if I did everything you did do I necessarily have to keep the d.i.c because I think mine is messed up but does the d.i.c have to work for me to do this ?

[@TheGarylthompson]

Ok, it all looks great my question is.... using RCA jacks for line level output from the aftermarket headunit assumes you have a amplifier right ? I just got my 2004 CTS recently, I know it isn't a Bose system but it does have 7 speakers.... do all CTS's have amplifiers? If not do I cut the original radio 4 wires and wire the aftermarket radio into the wiring harness?

[@SpensorKnitter-sl7vq]

How do I bypass the factory amp and still make this work? I’m tapping into outputs on amp and need to run them to decks speaker wires?

[@KingJamesV.3]

Thanks for the video, how did you hook your amp up, did you run a cable from the battery to the amplifier?

[@Hudsonb11]

Yes...

[@erniecarrasco9107]

@@Hudsonb11 are you just not using the original subwoofer with its factory amp and all the speakers sound fine? Did you have to do anything extra to not lose the back door speakers when you disconnected the original subwoofer set up. Or how did it act up when you disconnected the oem sub?

[@Hudsonb11]

@@erniecarrasco9107 all original audio being used except subs

[@danielsmith-vb9cb]

So u run ur other rca frm the bk to the amp Right

[@ryanzahorchak1859]

What do you do if your aftermarket head unit does not have RCA jacks?

[@aurorasequential]

So how does this work with the bose system. I'd like to bypass bose altogether. Straight from my new headunit to 4ch amplifier/mono amp.

[@Hudsonb11]

aurorasequential... Same setup

[@Jacoty50]

Can you still use your xm radio with this setup?

[@timh5334]

Is the wiring install the same procedure for the Non Bose System? Mine doesn't have the tan middle plug like yours, it has the same green yellow blue plug and the big black plug with the same color wires (2 light green, 1dark green and 1 tan wire) like the Bose model has on the tan plug.

[@erickalbertoRg4l]

man that good modifications when another video I leave you like hombre que buenas modificaciones cuando otro video te dejo like : )

[@patrickd1888]

could you post a little info on mounting the double din to the dash please?

[@Hudsonb11]

thanks for watching video glad it helped

[@phenomenallydriven6673]

Bro, thanks for the vid. Works amazing. My only question is that I have notice is that I don't have sound when I fade to the back only. So did I lose my rear speakers? Also on my unit I have outs for fronts, rears and subs.

[@Hudsonb11]

Darksyid Cosplay... Check your connection where you tap in with the jacks... I had the same problem just didn't have a good connection.

[@phenomenallydriven6673]

Hudsonb11 thanks man.

[@hottechgeek04]

What if your radio doesn't have the rca output wires? Do you use the radio wire harness at that point but that's has 8 speaker wires..

[@aironbishop4006]

Hey Hudson so I'm putting in a single deck with a flip out 7in touch screen done with the modifications only issue so far i am have after seeing your. Video is I dnt have everything on my dic u have ur setup all the preset channels I have the time and the car info when I scroll down but that's it only plug out is the brown one other 2 plugged n got any idea on my issue

[@Hudsonb11]

Airon Bishop XM radio won't work although it shows channels... I advise people who have XM radio subscription to install unit that has XM preinstalled or downloadable

[@lesliejohnson3735]

Do I need a amp for the unit to work

[@captainsalvage5518]

thanks this help. did you use a wiring harness at all.

[@Hudsonb11]

no wiring harness no pac... follow this guide you'll be good & save bout $350.00

[@captainsalvage5518]

+Hudsonb11 so does rca trick take of the speaker wires

[@geminiminded1380]

Hudsonb11 the rca you spliced into covers front and back?

[@joshbrowning3488]

Kenedrick Browning hey what's good! Digging the last name! Lol

[@DirtyDeeds-u5u]

Thank you for the video.

[@Hudsonb11]

shanta Hardy... you are very welcome

[@Rodrawdaboss]

Good vid. Ik it has help alot of ppl. Do u kno if it is possible to retain the rap? Im talking about where the deck stays on until u open the door.

[@Hudsonb11]

Rodney Jefferies... thanks & yes I'm editing that video now... rap + remote start install... subscribe to my channel if you haven't ... video will be up by end of the week

[@Rodrawdaboss]

Will do. Keep the vids coming. Just purchased a 2007 cts. Will be doing alot of customization to make it mine.

[@JV_214]

It ain't pretty but it works! Good job man 👍

[@mclovin1593]

About to attempt this mod tomorrow morning... just a couple questions yet. The unit I have has seperate jacks for front/rear audio and I've read that my CTS does as well, was your unit only the one pair of rcas?

[@Hudsonb11]

Tyler Buehler... yes & yours will be the same

[@mclovin1593]

Which red/white would I plug into on the back of my aftermarket unit? I have Rear/Subwoofer red and white jacks and the front red and white

[@mclovin1593]

Figured out the audio wiring part, however I was unable to power the unit. Any tips on why?

[@Hudsonb11]

Tyler Buehler... if you're using same method I used for power then check your fuses

[@chrislovesbutt]

How do you cut the part that is directly under the buttons ( band , f1 ,f2 etc all the way to the source button ) ?

[@XayJayJayXay]

Bout to do this to an 07. Just gotta read the printout to see what I retain from the old. Boards, plugs, etc.

[@eramirez7459]

instead of using the audio jacks an having to splice em an connect to that plug from the D.I.C . can the Left Right speaker wires be used from the touchscreens wiring harness instead?

[@Hudsonb11]

E Ramirez... No sir old school method doesn't work... car is equipped with data canbus system which simply means all electronic data must pass through this system in order to function

[@Paxx35]

Hey boss I know this video is a little dated but i was wondering if you still have the info on how to do this same install but without retaining the dic Trying to do a fresh install got power on the unit but not sure how to wire up the speakers to my new double din any info on this would be greatly appreciated!

[@Hudsonb11]

Vincent Harris... you jus gotta get the pac-02 and a faceplate kit... It's pretty straight forward once you get the pac-02

[@Paxx35]

thanks for the info mine arrived today going to get it installed today

[@mprtunetv7512]

How did you run your power wire for your amp

[@johntillett3317]

Can't you find the hot that comes on with key from another wire from behind the information center?

[@DisclosureTvNews]

The remote wire you used in the fuse box connecting it to The hvac is actually easier to get to. It's actually the brown wire below the red/stripped wire on the ac control harness in the dash right below the radio. So really you didn't need to run that wire all the way back to that fuse box.just needed to splice in a wire about 10" long.

[@Hudsonb11]

This was one my 1st videos... everything has been updated since... check out my other videos

[@octaviusharris2186]

I got the radio hooked up so how would i go about hooking up the amp and subwoofer?

[@Hudsonb11]

Run rca jacks from aftermarket unit to amp… run your hott to battery… ground it and tap in your fuses behind the seat for remote turn on

[@octaviusharris2186]

@@Hudsonb11 i got the jacks in already wheb i hooked up the aftermarket radio do i tap into them then connect the other end into amp?

[@2000busa82]

So you cut the 4 wires on the tan plug for the speakers, but that works front and rear speakers on 2 plugs and not 4 plugs?

[@Hudsonb11]

two wires control all front speaker output and the other two control all rear speaker output... simply because the car is equipped with a system called data can bus... which simply control some of the car electronic functions... we just hacking the system the to make what we need to function properly. ... check out prt2 of my video as well

[@denardsky5046]

Did you bypass the bose?

[@Hudsonb11]

I didn’t... my car isn’t Bose but the set up is still the same

[@JC-yd9db]

what about the radio amp wire, and do I need to worry about the wire to the emergency brake. I saw where you could just ground it?

[@Hudsonb11]

John Cacioppo... only worry about the power and ground wires... also ground parking brake wire this allows video playback while riding or parked

[@colonjayeggleston9094]

2 chainz installing decks now?

[@Madeuptown]

glad I watched this they was tryna charge me close to 1,000 to upgrade my shit...

[@Hudsonb11]

James Baker...Glad video helped u out trust me I know how ridiculous shop prices are...

[@columbianbambam]

You have volume from all Speakers and tweeters? Will stock sub still work?

[@Hudsonb11]

columbianbambam... yes all speakers and tweeters play

[@columbianbambam]

Almost done the install, well it's complete and working well, my antenna adapter sucks ass as the reception is horrible, just need to clean up and sand the bezel a little cleaner.

[@columbianbambam]

Scohse antenna adapter is horrible or it could be the deck as it's a cheaper android unit

[@Hudsonb11]

columbianbambam 9x 10 its the unit u using

[@columbianbambam]

Hudsonb11 everything else sounds good just shit reception

[@JetsWO]

how can connect my factory bose system that came with my car to the aftermarket stereo?

[@robertgruber3864]

What does the factory deck need to be on for the aftermarket deck sound to come through? Does the factory radio and xm radio still work after this? I know this an old thread, hope someone still reads it and can help! Thanks

[@robertgruber3864]

Ok, answered my own question by actually doing the install. No xm, aftermarket stereo ties directly into speaker system. Now my question is, does anyone think an a/b type speaker selector could work in between the aftermarket and xm stereo? Input A side tied into the xm harness, input b side would be aftermarket stereo.... Output to the harness that plugs into the stock radio. That way I could keep stock xm and switch between the 2.... If anyone had some thoughts on this, please respond! Thanks

[@rawiswar1969able]

Good look

[@gamercoolapple1]

I know this is old but can you show or tell me how to bolt the radio to the existing din I'm having trouble keeping the radio up without it slacking down or moving

[@Hudsonb11]

Random... Yea send a few pics to customautosports@ gmail.com

[@MrAwsomeshot]

you didnt happen to draw up a pin out for this did you? hard to tell what you have going where from video.

[@Hudsonb11]

Bose or non Bose... amplified or non amplified... just follow this setup & you'll be good... the rca cable taps into the factory system and plugging it into aftermarket unit allows it to read that signal... no other wiring necessary other than what's here

[@TheGarylthompson]

Ok thanks, dude... I've learned more from your videos than mining the web for days

[@edwinharden7163]

What wire do I connect the orange to on pin #5 (Line Out) and the pink/neutral on pin #12 on the (Option) to. On the C Connector? Can anyone help me?

[@kierrajackson4226]

I get your concept but where are the front speaker wires

[@Hudsonb11]

There are actually no front or rear speaker wires per say.., that’s the reason for the tap in with the jacks for all speakers

[@cadillacd8639]

@hudsonb11 I'm not getting any sound in my 2005 CTS. Could it be that I'm using jack plugs from a television. (white/red jack plugs is what i have)

[@Hudsonb11]

Dadrian Ellis... yes sir that's exactly the problem you're gonna need some jacks that's used to hook speakers to amp

[@cadillacd8639]

Also real quick: Can i hook the radio up with the motherboard plugged in? Wanted to hook wires and sound up first

[@Hudsonb11]

Dadrian Ellis... the jacks is what allow all sound... without the proper connection u won't get any sound because u will be using the radio from the unit you're installing the factory radio won't work

[@cadillacd8639]

ok. i changed my jack plugs. everything is hooked up like you have it. But i haven't got my DIC and motherboard with me, its in the house. I'm still modifying it. But i was just tryna make sure everything qas good b4 i starting cutting. In order to get sound, will i need anything plugged into the motherboard? like the top and bottom plug? i remember you saying the middle plug dont have to be plugged back in. But do the other ones have to be plugged in for sound to come out?

[@Hudsonb11]

Dadrian Ellis.... yes the other 2 have to be plugged in for the info center to work... as long as you follow my videos you will be good... if you have any problems I'll walk you through

[@xeniaesquivel8917]

how do i get the factory amp to come on with the after market radio??? the info center is still controlling it

[@Hudsonb11]

Xenia Esquivel...factory amp should automatically come on... & it can only be controlled by info center... second adjustments should be made with aftermarket unit to get the sound you're looking for

[@Hudsonb11]

Yes the rca replaces speaker wires... you only need to use the power wires ( constant & on/off) & ground from the aftermarket unit

[@dcooper6191]

@Hudsonb11 my dic isn't working I can't get power to the radio

[@hottechgeek04]

What if your radio does have output for rca jacks

[@hottechgeek04]

Just input none output sound

[@Hudsonb11]

Justin Moss... if radio has rca output jacks you good 2 go

[@Hudsonb11]

rca output a must... you gotta upgrade that unit for proper install

[@terryhill6675]

Can I connect with you via email for questions?

[@adejastinson444]

bro how do I get power from the cigarette lighter to the radio. I cut both wires to hook up but I'm gettin no power to my radio

[@Hudsonb11]

the cigarette lighter only gives you partial power the wire hooked to it is actually considered a memory wire... the second wire you see me hook up is actually the power wire that's why it's ran to the fuse panel in the back... once you connect both of those wires and the ground you should have power

[@adejastinson444]

good looks bro

[@Hudsonb11]

anytime

[@adejastinson444]

I hooked all three wires like u said still no power do u think it's the power to the cigarette lighter that's out like a fuse.. if so do u know which one

[@Hudsonb11]

Just added video on the modification process for double din install

[@patrickd1888]

+Hudsonb11 appreciate you man, thank you!

[@Hudsonb11]

Don't 4get the board is a live circuit if it's touching the metal housing then you have most likely blown a fuse... check the fuses under rear seat... specifically the radio or audio fuse... before replacing protect your board from metal housing, replace fuse then unplug all three connectors behind radio for a min replug and should be good

[@Hudsonb11]

BudzGainGreen... definitely gonna need those strips plugged in

[@Hudsonb11]

BudzGainGreen... No problem jus get @ me

[@Hudsonb11]

BudzGainGreen... No problem... subscribe to my channel if you haven't... gotta video I'm editing now on remote start that I'm gone have up by Sunday

[@badvybz72]

And folks don't use electrical tape when taping up your wires electrical tape will get hot and lose its adhesive instead use shrink tape.

[@byronaandrade]

Im having issues installing mine big homie

[@Hudsonb11]

Byron Andrade what's the problem u got?

[@byronaandrade]

@@Hudsonb11 starting with the wire harness

[@lilricrick]

Alright bruh I can't get it to play videos, everything else works fine, I got an pioneer avh 2600bt

[@mrjuliusd05]

Yo, I'm struggling to get sound, the wiring harness that connects to the touchscreen has the speaker wires attached instructing me to connect it to the correct wires from the factory wires. I have a Tocado 6.2 w/ reverse camera (that's a whole nother project) and I can't seem to get my D.I.C to work. Can you help me out?

[@Hudsonb11]

julius mcnair... does this unit have audio output jacks?

[@mrjuliusd05]

Hudsonb11 only AUX jacks

[@Hudsonb11]

julius mcnair... did you wire it up like video

[@mrjuliusd05]

Hudsonb11 wired it up just like video, but it didn't make sense to wire the jack plugs to the car radio harness if the touchscreen harness has the speaker wire connection attached. I may have to send you video my man. I got it to power on from the video just like you did. I got that part

[@Hudsonb11]

julius mcnair...i know it doesn't make sense... the speaker wires that comes with the unit are useless for this installation... this car is has data canbus system which makes speaker wires obsolete... using the rca jacks is the only working method if you looking to keep the info center

[@t.odagoat]

That super 🥷 ridded

[@mprtunetv7512]

🗣 2 chainz lmao

[@Hudsonb11]

ground parking brake

[@scoobarusti7728]

Mmm not a fuse in sight. People can afford Cadillacs then wanna do an install like this?! Why? Pay a professional and get it done right the first time people!

[@psycomike1654]

Just so you know.. Been a year now and its still perfect. Ive done tons of custom work especially for my car club and this was a tricky install. Ig@evolution_car_club_wny

[@aironbishop4006]

No xm just plain Jane I understand that the radio will. Not work all is well with that no need anymore the only button that will work is the up down to scroll ur levels of car and cancel/clear button nothing up top works the presets I get wont work but u display other buttons being used that mine dnt even show up man all I get is the time and temp unless I scroll up or down on just that one button group

[@Hudsonb11]

Airon Bishop u using iPhone? If so I'll FaceTime u 2moro or u can FaceTime me when u get a min so I can see what u got goin on

[@aironbishop4006]

Thanx no iPhone but I out all 3 plugs back in the back of factory radio just like it came only different is the clipping and cutting out of the face plat for the insert but I did a good job at taking time and doing it right and clean so idk maybe I messed the face plate up

[@aironbishop4006]

@@Hudsonb11 hey man I could rly use ur help on my hook up for sound I have done everything u said but still no sound

[@Hudsonb11]

Airon Bishop send some photos or video of what u got goin on to me customautosports@gmail. com

[@Hudsonb11]

radio fused and main power fused lol you probably another electronic shop that drop the ball on this 1....

[@scoobarusti7728]

We at the "shops" like people who try and save a little money and to try to do it themselves because most likely they'll screw it up and won't be able to troubleshoot it... So we charge them to troubleshoot AND to fix it the right way ;) so keep doing what you're doing.

[@NW_Mechanic]

Hudsonb11 yeah usually when they try to do it themselves and screw things up and then finally decide to come to us professionals, then we'll usually double the price. Because we got to undo everything they did, put everything back to how it came from factory, then troubleshoot everything that's messed up and blown, and then do it the right way. So it usually will end up costing them double or more in the long run instead of just doing it right the first time. and I have seen some stuff in my time that makes you think " Wow, some people should just not ever attempt to do certain things, then leave it to the professionals."

[@danielsmith-vb9cb]

Can u in box me pleas

[@NW_Mechanic]

well that is one of the messiest install I've ever seen on KZbin from somebody showing people how to video. I advise anybody that does this to not use speaker wire for your power wire and not use electrical tape for your connections I would suggest butt connectors or solder and heat shrink to make it look nice and clean and not have wires just everywhere with tape hanging off of them. and you should never tap into a fuse box by just wrapping bare wire around a fuse, they make what they call a fuse tap, if you want to do it that way but that is not how I would do it. also if you use the right tools to cut the square hole to relocate the plug for your harness, it would not look is janky and messed up as the one in this video. would also suggest using better higher-quality RCA's and primary wire then what is in his vehicle. just saying if you want everything to work right the way it supposed to use the right materials, and tools and it will work and look a lot cleaner.

[@UltraRudeBwoy]

Why are you so negative?? It obviously worked for him, and it's not everyday that someone is going to look behind the radio... When the radio's installed it looks very clean to me; especially with the dic retained!

[@LonokeCountyResearch501]

UltraRudeBwoy he is showing the ropes i cleaned it up a bit but no car install place is going to doing this of less than a 1000 even without the dic its like 600 so salute the man and keep it movin

[@eramirez7459]

i dont got any audio . i got everything connected like u do. if i dont get the L an R audio jacks spliced into the tan plug the 2light green an the dark green an brown wire right will the sound not play at all ?

[@Hudsonb11]

E Ramirez... that is correct! you must splice into those wires with audio jacks in order to get sound

[@eramirez7459]

right i got em spliced into them but i dont got any audio still from the deck i got my chimes an the d.i.c works . will audio still play if i got the audio jack cables spliced backwards into the tan plug with the 2 light greens an the dark green an brown wire. thanks for helpin out man . i appreciate it alot

[@stevensaenz1888]

What’s your cell number so I can give u a call I have some questions about cutting the square out for screen if I cut it it also has green fire wall behind it if I cut it in half will the other top half still work

[@Hudsonb11]

Steven Saenz look at this video(kzbin.info/www/bejne/raDEfGZrmpJ6mKs) if you still need help or email me your # and I’ll call you 1st chance I get tomorrow

[@edwinfigueroa2595]

That is the most fucked up set up ever your car is gonna burn to shit

[@michaelpalmisano6788]

Ppl pay professionals for the experience and knowledge on doing the job right.. just because you install something and it works doesn't mean it's right. As a professional with a shop I can tell you I'm not even half way through your video An I see a bunch of mistakes .. you telling ppl to cut rca wires and connect to speakers with tape lol, power ground at cig lighter , ACC power just shoved into a fuse ...come on brah this us all a hack job. I feel sorry for the poor ppl who follow this how NOT to do video cuz they looking for trouble, An you gonna make ppl waste there money on buying damaged car parts and aftermarket equipment smh. This is 100 percent the wrong way to do this job .. you said you doing a remote start soon...lol well this is one of the easiest cars to do remote start/security system on..but still this vehicle has a can bus system ... you give ppl instructions on that like you did here ..you gonna fuck someone's ecu up in there car . Do some videos on shit you actually know what your talking about...cuz Car Audio is definitely not one of them.

[@Hudsonb11]

No shop could do this and retain driver info center...why would I pay for what professionals can't do... Everything so wrong but everything in my car still works factory...pay attention 2 how long this video been up! Remote start video up and it works as well... I'm glad Everytime u so called professionals chime in...I took alot your work charged half your price and many ppl are satisfied except the professionals....zero return rate... U probably just got a job doin this fresh outta School and u wanna make your self seem knowledgeable... You're years late and a couple updates behind keep watching u might actually learn something

[@Hudsonb11]

Mmmm if dumb to where fuses are and what they look like then maybe you should...you just a dummy