CAG set Installation Instructions Ramen Toy

This video serves to demonstrate how to install the Ramen Toy CAG set.
ramentoy.com/p...

[@ed209onthestairs]

Got mine and installed it the other day. It makes the $75 Batmobile toy look like a million bucks! It's incredible!! Thanks Ramen Toy!!!

[@AlphaProto]

Wow, that canopy changes the entire car profile. That looks slick.

[@stevenlawrence7734]

Just received and installed one of mine today! Super easy install that took beginning to end 5 minutes! Totally worth the upgrade!!!

[@m4verlck1]

I just preordered it. My batmobile is already customized. Now this will bring it to an even higher level. Thank you guys for making it possible

[@brianphilipdavis]

Got mine (glossy) installed today and it looks fantastic. Perfect fit. Nice job guys.

[@PsikyoFan]

Did mine today, but I had an issue in that the base wouldn't separate from the cockpit without some force - a large blob of glue had stuck them together. I would say that if people have removed all of the screws, and yet still it appears held together in the middle, that inserting a screwdriver to the specific location and levering is going to be better than attempting to just pull the two halves of the vehicke apart when they won't go.

[@Timkasa82]

This looks amazing, Ace. Also, I want to thank you for putting the rest of the 80s commanders for pre-order. I can't wait for my three 80s commanders to arrive. Once the CAG is available, I'll be ordering it.

[@phillines6297]

Great job, @ramemtoys... Looks the part! Now let's have that shield, that would be dope! 💯👌🏻

[@ed209onthestairs]

Oh man, that would be SICK!!

[@sva3897]

Awesome addition, or shall I say 'correction' to that Batmobile. Could be awesome to have these machine guns with a mechanism that makes them fold in and out. I presume that would be difficult to sell as a kit because it involves very precise cutting in the bonnet of the car.. Maybe something I can customize myself, slap a few servos in, 3d printing a mechanism... Love the Ramen Toy products! For me they oftenly fill in the gaps that vintage toylines left in their range of products. The Great white was a good example of that. Keep up the good work!

[@ramsesosirus]

Thanks for making these! Just pre-ordered one for mine and saved this video for the install

[@TheClockworkCount]

Just got it today, and it looks so much better! Great work, Ace!!

[@missiletoad7015]

What can I say, you've made a fantastic set here! All I ask is, please please get the black on the canopy to match the rest of the car. Thank you!!

[@RAMENTOY]

It will match 99%, it will not be 100% because the black on the car is injection plastic color. While our part will be painted black. So it will be 99% match, not 100%

[@missiletoad7015]

@@RAMENTOY I can live with that :) Thanks!

[@roberthutton9698]

Looking forward to this! Avoided buying the car because of the lousy canopy design. Glad all these after market kits are popping up!

[@evilz365b5]

stuff like this is gonna keep me coming back 😂

[@derrickorourke8454]

Thanks for doing the tutorial. This looks like an excellent upgrade. I’ll be getting both versions.

[@chrisminton516]

Didn't even know this was a thing until I saw it on Geek Dad Life. Just ordered the matte finish for my gold label 89 batmobile. Normally, I don't mod anything because I usually break stuff. This, though, looks pretty straightforward, and the results look amazing. I love that the figure still fits inside as well. If I do manage to break something, I have an extra Batmobile sitting in the box. Can't wait for this to arrive.

[@RAMENTOY]

Thank you for dropping by and placing the order. We look forward to serve you.

[@FigureManiaShow]

So cool. Can’t wait for the preorder

[@toyepisodes247]

A flame effect would be great!

[@marcodalinoc5875]

Man, there should be a part two for the upgrade: the cockpit! Two-seater and with the steering wheel moved to the left.

[@RAMENTOY]

One step at a time

[@marcodalinoc5875]

And I look forward to the next steps! 🙏🙏🙏

[@Hamburger759]

It would be cool if you can add the flame boost effectswith light up function.

[@matthewle6529]

Great tutorial video. Can’t wait for the preorder.

[@marcelo78]

Just ordered. Can't wait!

[@a.q.gonzales9835]

needs a 2 seater upgrade/adjustment...its ok if it doesnt fit the 7" Figure...its for the SHF, Mafex or NECA Batman '89 figure

[@NightwingReturns]

New cockpit and turbine nose would complete the transformation. Only thing I would change on the gas caps is round over the top edge of one of the 2 square tabs. One side is a hinge in real life so it would be smooth edged to open. Just my 2 cents.

[@Collect2Disconnect]

Just put my order in Ace got the email and instantly added to my cart 🦇

[@junebug2565]

Fantastic Ace! Is there anything you can do to make this a two seated Batmobile?

[@RAMENTOY]

One step at a time

[@ecproductions66]

Getting mine in a deal with my dad! Can’t wait to finish my customization journey! (He gets Steppenwolf + Zemo fig and I get this in exchange)

[@diecastmodelsnbeyond6354]

Oh man, can't wait to have it 😎 Would be great to have a transparent red and yellow light for front and back of the Batmobile too.

[@BooshmanLee]

Do we know the type of screws used? I already misplaced a few, need to replace them.

[@andrewlperu]

Wow, at this price this is an absolutely essential purchase! You guys at Ramen are hero’s and geniuses! I have to ask about the clarity of the window plastic, is it just as clear as the stock canopy? It’s just looking a little bit matte in some of the shots, hoping to see my bats nice and crisply when he’s behind the wheel 🦇

[@RAMENTOY]

What you see there is a prototype. in any prototype, which is a 3D print, the level of transparency on clear parts is foggy. This will be tooled and clear parts will be clear parts. Thank you

[@albertfuentes1190]

Is it going to be tinted.

[@RAMENTOY]

@@albertfuentes1190 yes

[@NightwingReturns]

What is the price?

[@RAMENTOY]

@@NightwingReturns ramentoy.com/products/item-1989cag-pre-order

[@felipegomez6729]

Been anxiously waiting for this and Signed up.now,I just gotta Paint my Batmobile to match the Canopy and I'll have the perfect 1/12 scale 89' Batman,Batmobile and Batwing set in my Collection 🥰

[@princedragon8625]

Pre orders when? Ship to Puerto Rico?

[@dasima04]

Thank you. I am interested and would like to know if you have shipping to Mexico? Thank you

[@RAMENTOY]

Yes, we ship to Mexico

[@AllAboutTheVillains]

looks great!!!

[@jasonreidlowery]

Wow this looks spectacular!! Sign me up!

[@dreworiginals]

I’m definitely going to be picking this up!

[@VernRants]

Definite improvement!

[@RAMENTOY]

Thank you 🙏

[@A666A.]

Yo! This looks great, cannot wait!! Will this match the shiny or the matte Gold Label version, or are you going to offer both?

[@RAMENTOY]

Available in both gloss and matte finish options. Thank you

[@seankent2036]

Where can I get my hands on this kit?? I don't see a link in the description

[@RAMENTOY]

ramentoy.com/products/item-1989cag-pre-order

[@scottmcclary594]

have you done any research to how many total batmobiles McFarlane put out so that anyone who has this batmobile that wants the upgrade kit can get it, are the preorders first come first serve or are they open preorders that won't sell out just however many pre-orders you receive is how many you'll produce, and if it is an open preorder crowd fund how long of a preorder window will there be?

[@TrippyCast]

Are there going to be anymore of these available? I just bought the 89 batmobile and I'd like to get the CAG set. But it's currently sold out.

[@RAMENTOY]

Please watch for our website in the coming weeks for a final pre order for a last batch production, thank you

[@TrippyCast]

@@RAMENTOY I absolutely will! Thank you for letting me know!

[@TrippyCast]

@@RAMENTOY I'm not kidding when I say that as soon as I see it available I'm buying it ASAP!

[@DrKimCTV]

Wow~ Scale?

[@yipersnaperify]

When will it be up to buy?

[@sda9650]

🤘

[@somarriba333]

Looks really cool but the canopy doesn't look like it's flush with vehicle.

[@RAMENTOY]

Yes, it is not flush. We couldn’t get it to be flush.

[@trtledave3079]

When the button on the hood is depressed does it still allow for the new canopy to pop open the way the original one does?

[@RAMENTOY]

Exactly the same, thank you.

[@trtledave3079]

@@RAMENTOY great thank you for the reply, I'll be keeping an eye out on the website for when this goes up for pre-order

[@arkhamassassin7174]

Ace, when does this go up for pre-order?

[@RAMENTOY]

Very soon. Thank you.