never make a mistake when using a rotating wire brush on the angle grinder

[@caldeireiro23]

Hello friends! It's great to have you here. Please tell me what you think of this video and which country you are watching us from so I know how far this video has reached 🙏🙏🔥🚀

[@edilsonsilva5668]

Brasil 🇧🇷 🤗

[@mihailuk8579]

Holland.

[@caldeireiro23]

@@mihailuk8579 🤠🙏🎉

[@caldeireiro23]

@@edilsonsilva5668 🙏🙏😉

[@altacirbehenck6457]

Brasil

[@dreamlifter2701]

To anyone planning on using a grinder please understand how dangerous this tool can be! A grinder is arguably the most dangerous power tool. I am a pipe fitter so I use this tool very often and I see people not respecting how dangerous these tools are. The biggest thing is to wear a face shield in addition to regular eye protection. Do not cheap out and skip the face shield especially when using wire brushes! The brush wires will inevitably shoot out without you even realizing it. Also the grinding wheel can come flying off! Yes it does happen! Especially if you don’t know how to put on the attachments properly. Also wear tight clothing unless you want to become minced meat. Long sleeves are also a good idea but not entirely necessary. Be sure to have gloves on as well but make sure they fit tightly. Lastly I would highly recommend hearing protection.

[@caldeireiro23]

Thanks for sharing your safety tips! 🙏🙏🚀

[@carlosc.c9686]

This vid is unnecessarily long.

[@caldeireiro23]

🙏🙏❤️🚀🎊

[@mathsnetic]

There is max rpm written on every attachment like wore brush it is the most dangerous attachment but only if be used with proper rpm ie 8000 rpm mostly grinders run at 12000 rpm but have speed control option as in mine 125 mm angle grinder russain model one should also wear protective gadgets but some time you ignore the safety and pay for that i had a big cut with this wire brush but lucikly i was not so severe to stop the work coz i was running my machine at full rpm i was my mistake then i never increased the rpm beyond the recommended rpm and every thing went fine since then you also observe great vibration while using this wheel be careful safety first

[@caldeireiro23]

Thank you very much for watching our video and leaving your feedback! I wish you all the best in your life 🙏🙏🚀

[@shootingsportstransparency7461]

A wire brush is not intended for the speed of an angle grinder, those small steel wires come loose and shoot around like razorblades

[@caldeireiro23]

👏👏🙏🙏🚀🔥

[@charliejones7574]

I wear farriers leathers when I'm using any wire wheel...those darn things go DEEP

[@WilsonMeke]

😂😅😅

[@AmazingSmart-ngth]

Thanks for sharing, great idea

[@kookylook2071]

Check maximum speed rating before use !

[@jimjohnston7688]

Nonsense, I’ve done this many, many times. Wear proper protective gear and you will be fine. Any putz with a smart phone now becomes an expert.

[@caldeireiro23]

🙏👍

[@ejarse]

He uasado pulidoras de 7 1/4 en aplicaciones de pulido de metales y visto muchos idiotas lesionarse por creerse los super protejidos por su equipo....

[@Chacha-c2b]

Hahaha! He said the same thing in a roundabout way and you were to the point. Both are correct. Thanks.

[@anibalartemio9110]

KiY ahora con la mal llamada "inteligencia artificial" vamos a tener que pensar y deducir si lo que te muestra es real o es alguna boludez para tener clics. Para cualquier efecto, quiero decir dos cosas: Primero : estoy en argentina Segundo: francia

[@notrut]

5 minutes of finger wagging ... No Thank You, it reminds me of being Married.

[@caldeireiro23]

😂😂🚀🙏🙏🎉

[@solix4k30]

Excelentes dicas 👏👏 só lembrando que a rebarbadora é uma ferramenta muito perigosa, portanto devemos tomar muito cuidado com ela 😉🙏👍

[@caldeireiro23]

🙏🙏🔥

[@louisd95714]

Very helpful video, especially because I have the same angle grinder.

[@caldeireiro23]

❤️❤️🤠🥰💝

[@peterevans9791]

It is quite difficult for surgeons to remove these wires from a calf muscle. They need to cut into the muscle, and feel for the wire, and keep progressively cutting deeper until they can feel the wire on their finger. So not only eye protection is required. The thin wires can go anywhere a very high speed. Be very careful!

[@caldeireiro23]

Thank you very much for watching our video and leaving your feedback! I hope your day is blessed and full of good things.🙏🙏🤗🚀🚀

[@dreamlifter2701]

Yes! Not only do you need eye protection in the form of safety glasses, it’s crucial you use a face shield when grinding as well!

[@nickmoore6727]

In Aussie started one up brand new no load. 4 inch .Blew apart first trigger pull .Could have been very nasty. Had it near ground in case it had issues. ..Entire bristles flew apart in seconds. Not a cheap brand either. Lucky I had glasses and face shield on as well.

[@caldeireiro23]

Thanks for watching and leaving your feedback! I hope your day is blessed. Be well 🙏🙏😉💪

[@BENGLASBERKAHCHANNEL]

Congratulations you have done this job perfectly 5:05

[@caldeireiro23]

😉🙏🙏🚀🔥

[@-Damawand-]

For a better result, first smear the surface of the rusty sheet with orange juice, after a few minutes, start working with a wire brush.

[@caldeireiro23]

🤠🙏🙏🚀

[@anibalartemio9110]

😂😂

[@PaulStClair-or3gj]

GOD SAVE ME FROM AMATEURS. AS A PROFESSIONAL /TOOL USER/MACHINIST/ TOOL MAKER FOR 57 YEARS, I SHUDDER WHEN I SEE THESE TYPE OF VIDEOS.

[@caldeireiro23]

🙏🙏

[@jeromepark7002]

Who trained this guy ... All wrong Better to use a petals abrasive disk to clean up rust from the plate . Do use a wheel buffer on a bench grinder to clean studs or that anchor bolt ! And use a full face sheild around the wire brushes

[@WorldCommander]

Why? What is he doing wrong?

[@AngelChimenti]

Buen video, no olvidaste ningun detalle!😊

[@caldeireiro23]

🤠🙏🙏🔥🎉

[@Thrunabulax10]

EYE PROTECTION is mandatory. Little shards of wire can depart those wheels at high velocity

[@caldeireiro23]

Thank you for the advice 😃🙏🙏🚀

[@ckchan9204]

保護及操作完全都做足了。但有三個小問題我不想做、1手套不帶2保護罩這情況不好.3因轉速不合所以不用.4拆卸底螺絲能理解.但既不用此碟就沒這個問題了。

[@caldeireiro23]

Thank you very much for watching and leaving your feedback, I hope the video helped you in some way! have a great day 🙏🙏🎉🚀

[@FrankWatson-dz8mf]

Should wear a full face shield because those wires fly off .I had one stick in my lip when I was at home using a wire wheel for a few seconds. I knew better and I even told my wife that I should wear a full face shield like I do at work and as soon as I turned it on and touched metal,a wire shot into my lip...frankw

[@caldeireiro23]

Thanks for watching and leaving your feedback! I wish you everything, stay well 🙏🙏

[@pipil63]

I used to use those wire brushes, they are very dangerous . Honestly . If using those , please wear complete face shield. The wires fly like a razors . The speed is a factor we most pay attention

[@caldeireiro23]

👏👏🙏❤️💝

[@a12b34]

Un súper disparate total éste vídeo. Simplemente hay que fijarse en los valores de rpm del cepillo, que deben ser igual o superiores a las rpm de la amoladora. ¡NOTA!: Ha de usarse solamente cepillos de celdas trenzadas.

[@caldeireiro23]

🙏🙏🔥

[@hunter9372]

The guard is useless in the use of the wire brush, as it is to shallow and does nothing to protect you from the from the wire.

[@caldeireiro23]

🙏🙏🔥

[@carlitosortiz2870]

How about flying particles?

[@dmystique]

I think we have evolved far ahead of Charlie Chaplin times...

[@caldeireiro23]

😉💝❤️🎊🙏

[@luisvaldez9320]

Gracias ! Nos enseñaste todo lo que ya se sabe

[@caldeireiro23]

🙏🙏🔥

[@caldeireiro23]

¡gracias! los principiantes no lo saben 🤠🙏🙏🔥

[@maurocoimbra9624]

Excelent video! I'm watching it from Brazil.

[@britfliptop]

and

[@caldeireiro23]

Thanks for watching and leaving your feedback! have a good day!

[@TipsInventor]

Thank you, we will definitely check this method in practice

[@caldeireiro23]

Thank you for watching and leaving your comment, may your day be wonderful and blessed 🎉🎉🙏

[@JuanAntonioBullo-of2cx]

Muy bueno el tutorial de seguridad 😅

[@caldeireiro23]

🙏🙏😉🎉

[@alejandroahedo1558]

Thank you, I learned sign language with this video 😂

[@caldeireiro23]

😉🙏🙏🎉

[@Gorthain]

I think you should ditch the music and just explain what your doing instead of playing charades.

[@caldeireiro23]

Thank you for watching our video and leaving your feedback! I wish you a blessed day 🙏🙏🎊😃

[@blackwater7183]

Not everybody speaks English.

[@mvwoon]

​@@blackwater7183¿Qué dices?

[@ronin4711]

The guard in this case does absolutely nothing, the only thing that protects you is heavy duty gloves

[@caldeireiro23]

🙏🙏👏😉

[@arnelzablan1498]

Power tools are dangerous if not properly use. Just strictly follow the manufacturers safety instructions!!!

[@caldeireiro23]

🔥🔥🙏🚀

[@Rifleinstructor]

I tried and my mom called the police😂

[@caldeireiro23]

Thank you for watching our video and leaving your feedback! I wish you a great day 🙏🙏💪🎉

[@bottmar1]

Use a KNOTTED cup brush. It lasts a huge amount longer. The one shown will throw all the wires in just hours. Knotted one lasts for days. Fourny makes the best cheapest ones. They had them for $4.50 when other brands were $14.50. Add a few dollars for today's prices.

[@caldeireiro23]

🙏🙏🎉🎉🚀

[@Ramon-t9f]

The guard is useless since it doesn't cover the whole brush.

[@caldeireiro23]

🚀🙏🙏

[@wildflower1542]

That is right it's useless ..He's crazy .

[@ssilva9510]

DUDE,DUDE, DUDE! wear a FACE shield ,not just safety glasses!! I speak from experience.

[@caldeireiro23]

Thanks for watching and leaving your feedback! I wish you a great day! 💝❤️🙏

[@marklaw3654]

Not just a face shield, a good leather also, I had one catch a edge flew out of my hand traveled right up my arm towards my head, lucky I had all the gear on.

[@ak54539]

Great choice of music.

[@caldeireiro23]

🙏🤠🥰💝❤️

[@KoHokCheung]

When i use a brush on my angle grinder i plug the grinder to a transformer that reduces the voltage by half. No more flying wires.

[@caldeireiro23]

🙏🙏🚀🔥

[@tyrotrainer765]

Thanks - I've got a variable speed grinder, I'll try it at the lowest setting - got to say I just bought the wire wheel and it does not give me a warm comfortable feeling. I'll try it but might go back to using one designed for an electric drill.

[@Nope-ity-nope-nope]

A slow burn but you get your points across.

[@caldeireiro23]

🙏🙏🚀🎊

[@sheelaandrews7321]

It`s still wrong , steel wire cup brush when rotating is above safety guard.

[@caldeireiro23]

thanks 🙏🙏🚀🤠

[@ΓιώργοςΜπαντοέρης]

most important is to wear glassed. Τhe hairs from the disc break and shoot out like bullets. Take care. is a dangerous tool.

[@caldeireiro23]

Welcome to the CALDEIREIRO channel! Thank you very much for watching our video. I wish you all the best in your life 🙏🙏🚀🎉

[@Kirt-Davis]

Once he put the gloves on, i couldn't hear what was being said

[@caldeireiro23]

Thank you very much for watching our video and leaving your feedback! May you make all your dreams come true 🙏🙏🚀

[@ejarse]

Yo si la he usado asi , pero le pongo cincuenta voltios A:C. con un transformador variac, asi es menos las rpm y hace menos fuerza....si se conecta directamente al 120 voltios es muy fuerte y si se traba en alguna forma hace saltar la pulidora y puede lesionarlo a uno.

[@caldeireiro23]

🙏🙏🔥🚀🎉🎉

[@MarcoToledoCastro]

Very good.

[@caldeireiro23]

🤠🙏🙏🎉🎉🚀

[@eduardodaquiljr9637]

Too much vibration is created and dangerous to use.

[@caldeireiro23]

🤠🙏🙏🚀

[@Nicola_Colonna]

I TRIED TO UNDERSTAND THE MEANING OF THIS VIDEO, BUT I DIDN'T GET IT

[@caldeireiro23]

🙏🙏🔥🚀

[@Nicola_Colonna]

@@caldeireiro23 EXPRESS THE CONCEPT INSTEAD OF PUTTING IMAGES THAT YOU DON'T UNDERSTAND ANYTHING, THANKS

[@raulazua5917]

Torreón, Coahuila. México. Poner la guarda a una copa de carda que sobresale. Es innecesario. Quedan las cerdas por encima de ella. La verdad es sorprendente que hagas este video y no pienses en ello. Habemos profesionales viendo y observando los videos. Suerte para la próxima.

[@caldeireiro23]

🤠🙏🎊💝

[@stevenlengyel9701]

Slow down how do you expect us to keep up with that crazy fast pace?

[@caldeireiro23]

Thanks for watching and leaving your feedback! May your days be full of good things 🙏🙏🚀

[@Chacha-c2b]

Good work. However it is equally important to wear a leather jacket or atleast a leather apron as used by the welders also, the gloves should be made of leather and longer like the welder's. The fine wires from the Brush can easily penetrate your skin. Prevention is better than cure! Thanks.

[@caldeireiro23]

Thank you very much for watching our video and leaving your feedback! May your day be blessed and full of good things 🙏🙏💪🎉

[@adrianguerra6541]

Yo lo he usado mucho y si es muy peligroso sobre todo para los ojos , hay que usar antiparras del tipo que se usa para la moto , o dea que no deje ningún espacio entre la cara y la protección , donde pueda pasar un hilo de alambre , estos salen con tanta fuerza que se clavan en el cuerpo , así que pueden perfectamente traspasar un ojo .

[@caldeireiro23]

Thank you very much for watching our video and leaving your feedback! May you have a great day 🤠🙏🙏🚀

[@abrogard]

it's been pointed out that it's inherently dangerous to use gloves with any fast spinning machinery. any.

[@caldeireiro23]

🙏🚀💪💝

[@santiagopenaloza9401]

Es mejor usarlo en una lustra lijadora, con una regulación de velocidad baja para evitar problemas, sobre todo si queremos limpiar partes con recovecos.

[@caldeireiro23]

Thanks for watching and leaving your feedback! May your day be excellent 🙏🙏😃

[@peterrudy9207]

Full face safety shield

[@caldeireiro23]

🙏🚀🎊

[@wildflower1542]

The guard won't protect you from the flying debris because it's too tall '.....

[@caldeireiro23]

Thanks for watching and leaving your feedback! I wish you a blessed day, stay well!🙏🙏💪🎉

[@backyardreturn]

use a variable speed grinder

[@caldeireiro23]

🙏🙏😉💪

[@rody6666]

Es la forma correcta de limpiar con el cepillo de alambre y recordar que saltaran hilos de alambre por lo que siempre hay que proteger los ojos y la piel 👍

[@caldeireiro23]

🎉🎉🎉🙏🙏🚀

[@construccion2456]

. 5:05

[@prakashrajpoot3235]

From Gwalior Madhya Pradesh

[@caldeireiro23]

🙏🎊💪

[@ronh5623]

Forgot to show unplugged cord or removed battery before install wire wheel.

[@caldeireiro23]

Thanks for watching and leaving your feedback! May your day be blessed and full of light 🙏🙏🚀

[@VwMikc]

I use these brushes on a drill.

[@caldeireiro23]

Thanks for watching and leaving your feedback! have a great day 🚀🚀😃

[@tyrotrainer765]

Yep, and that is what I'm going to do - I have one in my shed somewhere and used it dozens of times on my drill with no issues.

[@VwMikc]

@@tyrotrainer765 I recently tested it with the grinder and it works very well too, on flat surfaces. Have a nice day.

[@tyrotrainer765]

@@VwMikc Thanks for the reply; I only need to remove mill scale prior to welding, and slag residue later. I really don't like angle grinders (nor chainsaws) - there is too much torque going on with hazardous stuff too close to the body. I use the grinder as little as possible, and only with welding gloves, safety glasses and a welding helmet. Even with all that there are lot of body bits exposed to high velocity shrapnel.

[@VwMikc]

@@tyrotrainer765 yes always use protective equipment, due to laziness I have already had a few small accidents.😣

[@abelmiranda9033]

Lo ideal es utilizar un protector facial.una antiparra no es suficiente los alambres vuelan para todos lados

[@caldeireiro23]

¡Muchas gracias por ver nuestro vídeo y dejar tus comentarios! un gran día para ti 🙏💪🚀

[@richardtemby4358]

And prey tell, what use is the guard when the entire brush is operating entirely outside of it? It won’t even contain any flying bristles. Just sayin!!!

[@caldeireiro23]

Thank you for watching and leaving your comment! I wish you a blessed day! 🙏🙏🎉💪

[@hosseinbatani1273]

very good

[@caldeireiro23]

🙏🙏🤩🚀

[@dlkline27]

Another freaking music video. Grrrrrrrrrr!

[@caldeireiro23]

Thanks for watching and leaving your feedback! May your day be blessed 🙏🙏💪

[@perry8249]

A wire brush was made for use it in a drill

[@caldeireiro23]

🫡🙏💪🚀

[@a-bar-b5196]

Don’t use wire, use a sander pad.

[@caldeireiro23]

🤠🙏❤️🚀

[@Literature-ft8ru]

Flimsy wire wheels like this one seem to leave a metalic coating on every surface. Not really clean the metal.

[@caldeireiro23]

🙏🙏❤️🎊

[@raulazua5917]

Si no quieres que salgan disparadas las cerdas tan frecuente y puedan herirte. Usa la de hilo trenzado de .050" pulgada. Las de .035" se gastan y se quiebran más fácilmente.

[@caldeireiro23]

🤠🙏🚀🎊

[@mariogomez7992]

Hola, concidero que ese cepillo copa no es para una amoladora tan pequeña. No me da seguridad, es muy pesado para ese tamaño de amoladora. Es mi humilde opinión. Saludos cordiales desde Argentina.

[@caldeireiro23]

Gracias por mirar y dejar tus comentarios, ¡tu opinión es muy importante para que podamos mejorar siempre! que tengas un gran día 🙏💪

[@smartplumber101]

A great idea, it couldn't be a better idea than this. Thank you

[@caldeireiro23]

Thank you very much for watching our video and leaving your feedback! May your day be blessed and full of good things 🙏🙏🎉

[@georgejansevanrensburg7838]

Ths i have learn something from this

[@caldeireiro23]

🙏🙏💝🚀

[@FlangeMaster10]

Always use the tips of the wire and don't press too hard. Full face shield and nose filter.

[@caldeireiro23]

🙏🙏🥳🥰

[@fernandodoavila5132]

Muy buen video saludos desde México

[@caldeireiro23]

🤠🙏❤️🚀

[@carlosamaya7]

Yo lo iso en mi pulidora de velocidades, en cuarta velocidad y nunca he tenido ni un accidente.

[@caldeireiro23]

🙏🙏🔥🎉

[@AntonioSánchezGonzález-w4o]

Para mí opinión, definitivamente ese cepillo de alambre no debe de utilizarse en la amoladora porque la velocidad a la que salga disparado un alambre aunque uses ropa gruesa de todas maneras lo va atravesar y se va incrustar en la piel

[@caldeireiro23]

🤠🙏🙏🎉🚀

[@construccion2456]

Ese cepillo no es apto para amoladora,porque como suelte algún alambre y te de en la cara,te llevarás un recuerdo poco grato

[@gerardosilvestro8153]

Para una amoladora angular de 10.000 rpm , este tipo de cepillos , no me dio un buen resultado , se queda sin alambres muy pronto , son demaciadas rpm , y ojo debido a esto si lo usan !!! usen antiparras , si o si , creo que son mas apropiados para lijadoras de disco con 2000 / 3000 rpm.

[@caldeireiro23]

😃🙏💝❤️🚀

[@pablocristancho3315]

Aqui en col .algunas de esas pulidoras no tienen ese tornillo y ese tipo de cepillos son mas pequeños ,ademas se usa un liquido para hablandar .

[@caldeireiro23]

🤠🙏🙏🔥🚀

[@tyrotrainer765]

Glad this bloke does not give flying lessons. Imagine being his student and you actually get to fly the plane properly only on the last lesson. It must be a bummer being on lesson 1 and he wags his finger as you are in a vertical dive passing 100 feet.

[@caldeireiro23]

🙏🙏💪🚀

[@talveztesirve]

Asi se trate de un sepillo de banco tambien desprende hilos denalambre. Solonhay que usar ropa , guantes y anteojos o mascara facial adecuados . Yo usaba amoaladora a veces sin lentes de priteccion y se me calavo unaa esquirla en el ojo y me la tuvieron que sacar los médicos en un centro de ojos

[@caldeireiro23]

Thank you very much for watching our video and leaving your feedback! I hope your days are blessed 🙏🙏🚀🎉

[@wesleycampos8855]

O ideal é não cometer nenhum erro na vida.

[@caldeireiro23]

Obrigado por assistir e deixar seu feedback! Desejo que seu dia seja abençoado 🙏🙏🚀

[@md.boshir3950]

Tnx

[@caldeireiro23]

🙏💪🚀

[@caldeireiro23]

💪🙏

[@ettuinthu]

First and foremost present what one is to do & how to do...... As added information things not to be done could be..

[@caldeireiro23]

Thanks for the sugestion! have a great day 🤠🙏🎉

[@Juan37-7]

Yo lo he hecho pero con una pulidora para carros a una velocidad baja y no hay problema

[@caldeireiro23]

Thanks for watching and leaving your feedback! have a blessed day 🙏🙏😃

[@Powner187]

I want turn these cheap grinders into walk behind asphalt crack cleaners. Thinking to have them secured at the handle screw in by wood on both sides, and have 2 wheels attached to the wood. This would be 30 to 60 times cheaper than buying a real walk behind asphalt crack cleaner. Be as easy as using a vacuum cleaner.

[@caldeireiro23]

🙏🙏🚀🎊

[@Powner187]

@caldeireiro23 did it the same day I said it. Works better than the 1500dollar gas powered walk behind I rented couple years ago.

[@lucarsal]

Essa música está em 99% dos videos do youtube,quando vou ver um video e toca essa musica desligo de imediato.Há que ser diferente e não ser carneiro!!

[@caldeireiro23]

🙏🙏💝🎊🚀

[@robertdiamondoil2384]

What did he say?

[@caldeireiro23]

Thank you for watching our video! Feel free to comment and leave your opinion on the content presented. Have a great day 🙏🙏🎉

[@MIHERMANOCORBA]

Saludos amigo

[@caldeireiro23]

🤠🙏🙏🎉🎉

[@jamycs2009]

el cepillo de carda es demasiado grande para la amoladora,los hay mas pequeños. Con ese esfuerzas el equipo. No solo basta usar unos lentes,sino tambien,protector facial y mandil de cuero(las proyecciones de los alambres podrian caer en tu rostro y cuerpo)No son criticas sino recomendaciones de como trabajar por experiencia y sobre la guarda,lo veo innecesario por el tamaño del cepillo que no cubre las proyecciones de rebarbas y de alambre que se desprenden del cepillo.

[@caldeireiro23]

muy bien tienes toda la razón te deseo un gran día 🤠🙏❤️💝

[@JoseMarquez-qy2jo]

Me parece que es mejor usar con pulidora, así regular velocidad

[@caldeireiro23]

¡debidamente notificado! ¡Gracias por dejar tus comentarios! un gran día para ti 🙏🙏🤗

[@ToktokPhone-u1l]

Ok thanks kyou Boss

[@caldeireiro23]

Thank you very much for watching 🤠 🙏

[@mattking3148]

Well I was bummed 😔. I thought I was going to see a HAND get eaten 😱!! Ok, 👍, for playing it SOMEWHAT safe 😁. The idea works great. But, she'll do NASTY THINGS if you don't respect it ☠️☠️.

[@caldeireiro23]

Thank you very much for watching our video and leaving your feedback! May you have a special and blessed day 🙏🚀🎉

[@mattking3148]

@@caldeireiro23 13 years of ( Farm Hand ) I did things: OSHA would have closed their eyes and RAN!!! 🤣🤣!! I have ALL 10 fingers and both feet and 10 toes. Wasn't till my VERY LAST day I was training my replacement. I feel out of a Skid steer and shattered my shoulder. What a way to start my new job at a factory 🤣🤣. Still working at the same factory 😁. Employer loves my work. As-well my Farm stories 😁. 7 years now 👍. Awesome videos you got going 👍. Thank you.

[@AnuraBanneheka]

A act and explanation of a non technical crazy fellow! 😀😂

[@caldeireiro23]

🙏🙏🔥

[@patterdalezipsuzilil]

You need a speed control i use them all yhe time

[@caldeireiro23]

Hello friend, thanks for leaving your feedback! I hope your day is blessed 🙏🙏🚀

[@vladko6822]

Щетка на 6 тыс. оборотов, шлифмашинка - 10...11 тыс. оборотов, это щётка для другой шлифмашинки

[@caldeireiro23]

Thanks for watching and leaving your feedback! May your day be full of good things! 🙏💪😉

[@славаглинский]

А ему пофиг .

[@enriquemesina3383]

Usa guantes!! Seguridad ante todo

[@caldeireiro23]

🙏💝❤️😍

[@santboiboi375]

El fabricante del baso de puas te dira la rpm maximas que admite !! Lo demas es ensayo error !!😂😂😂 Saludos .

[@caldeireiro23]

Thank you very much for watching our video and leaving your feedback! I wish you a great and blessed day 🙏🎉🤠

[@grahameblankley3813]

Please wear goggles that seal round the eyes the type that Biggles would wear, the wires are dangerous to the eyes.

[@caldeireiro23]

Thank you for leaving your feedback! have a blessed day! 🙏🙏🚀

[@aleszulloc.1098]

Ese cepillo soporta 7000 rpm y no 11000 rpm !!!

[@caldeireiro23]

Thank you for leaving your feedback! I hope your day is blessed 🙏🙏🚀

[@ivandacruzrodrigues4989]

Tô assistindo de Piripiri Piauí Brasil valeu pela dica

[@caldeireiro23]

🙏🙏💞💪

[@alfredolopez6271]

De que le sirve la guarda cuando el. Cepillo sobresale de la misma

[@caldeireiro23]

Thank you very much for watching our video and leaving your feedback! I hope your day is blessed 🙏🙏🚀

[@Mar-ve5um]

Acho que seria para segurar estilhaços do suporte das cerdas, caso quebre por causa da rotação. Minha humilde opinião!

[@jemmyluisluzardoromero7450]

¡Dios mío! Usá guantes.

[@caldeireiro23]

🤠🙏💝❤️❤️

[@ottorodriguez914]

Perdí mi tiempo viendo un video con un titulo que no corresponde

[@caldeireiro23]

🙏🙏👍🚀

[@502days]

Numb nuts 🎉

[@caldeireiro23]

🙏🙏🎉🎉🔥