Very nice lathe, well done. Don't worry about losing a bedroom, the lathe has a bed.
4 жыл бұрын
Vibration bed and harmorious sounds.
@MetrologyEngineer4 жыл бұрын
Just put a box spring on it and you're good :)
@congtuong58444 жыл бұрын
Very beautiful. You are servicing a lathe. Meaningful
@ADBBuild4 жыл бұрын
A man with his priorities in order, lathe more important than bed. Can't wait to see this thing making parts!
@SuperAWaC4 жыл бұрын
@10:05 That is the way it is supposed to be, it is a safety feature with lathes that have the single-lever power feed control so you don't accidentally crash the machine. More expensive lathes often have one lever for the carriage and one for the cross slide, so it is not an issue. Some older lathes you don't have to reverse, but are much easier to crash if you aren't careful. It is additionally less complex and therefore cheaper to make it the "safer" way. @10:57 Make sure to maintain the spindle brake pad, some lathes it is just cork, and needs one drop of oil per day of use. It can be a pain to replace, and deteriorates rapidly if not maintained. The Mori-Seiki lathes are very good, you will not want to give that one up unless you come across something like a Monarch.
@thechumpsbeendumped.77974 жыл бұрын
What better on a cold, rainy miserable day than a video from one of my favourite creators?
@ashy14234 жыл бұрын
This machine has been waiting for someone like you to give it love and care. I love your videos and they are worth waiting for. I hope you are well. Stay safe and blessed. Ashraf from Scotland 🏴
4 жыл бұрын
Thanks man!
@RachaelSA4 жыл бұрын
From what I have seen of your work in the past, this old lathe is the luckiest lathe on the planet.
@Boneless_4 жыл бұрын
To be honest, the new lathe sounds really quiet and dammm that ground level precision... So perfect. You sure will turn that thing into a masterpiece xD
@RobB_VK6ES4 жыл бұрын
There is an old saying. "A bird in the hand is worth two in the bush". Nice recovery with the Mori, a quality machine.
@rickpalechuk44114 жыл бұрын
Hardened ways... one less thing to deal with. Looking forward to this rebuild series. Thanks for sharing, Cheers
@troyam66074 жыл бұрын
you've done well Brother! that decision to leave those lathes led you to the moriseki - it looks like an amazing machine!
@heliarcweldandmachine4 жыл бұрын
and led him to having to give up a bed and sleep in the dirt, something we all can aspire to !
4 жыл бұрын
Lol. A shop with granite floor, toilet, aircon, pink and purple paint, some cool pictures and paitings hanging around. Who need to sleep.
@troyam66074 жыл бұрын
@@heliarcweldandmachine i do anyway! you ever been north hahaha
@EverettsWorkshop3 жыл бұрын
That chuck cleaned up very well! And that lathe, even though you can see it has done work in its life, is in great shape. My brand-new lathe, made in a place just North of your country, had more backlash out of the box when I bought it 5 years ago!
@BurtonsAttic4 жыл бұрын
Giving up your bedroom for your shop is hardcore!
4 жыл бұрын
Ive been thinking about that for years. No other options so... but will be a nice shop with toilet and aircon. Who need to sleep.
@BurtonsAttic4 жыл бұрын
@ I have large room in the house right next to the shop that I walk thru from the kitchen to the shop. We don't really use it. Over time I have slowly started putting random things, mostly material (wood) in there to get it out of the shop. One day my wife will notice and I'll have a big problem! Good luck Bro!
@joecnc33414 жыл бұрын
Thank You for the great video, and keep on posting! Your shop is coming along nicely. Frank Stronach - an Austrian machinist - came to Canada.. bought a Lathe, Mill, and surface grinder.. had to sleep on a cot by his lathe at night.. He is now one of the richest men in the world. A good read is "Magna Man".
@matrixdecoded11664 жыл бұрын
Just got a lathe from my grandpa. Love how you indicated the accuracy of the bed and headstock. Never thought to do that. Thanks.
@mmovie4 жыл бұрын
Cant wait for the new videos! Please show the whole process of building and rearranging your workshop, its always interesting. and of course the lathe restoration!
@precisionmachineshed4 жыл бұрын
Nice lathe you ended up with there. Not always fun to walk away from a machine, but there's always something better down the road. Good find! Make a small Murphy bed, hang it on the wall..... good to go!
@richardmeyer4184 жыл бұрын
Great job on the chuck and congratulations on the new lathe - it looks like a really well-kept machine. You'll have to paint it green now to match the other stuff in your shop, and I am sure the chucks won't mind if you sleep with them. Great video, Ca Lem.
4 жыл бұрын
Sure thing ;)
@ronwhite67194 жыл бұрын
Yes, it has to be Ca Lem green!
@curtisvonepp43354 жыл бұрын
@ YOUR NEW ENGINE LATHE IS IT JAPANESE MANUFACTURER .😨 .
@garywalters42864 жыл бұрын
So glad to see you back making videos,and with a new project.I can't wait to see your new bedroom!
@Ideasite4 жыл бұрын
You are a brilliant machinist and an inspiration to me and many like me. Thank you!
@codprawn4 жыл бұрын
Ikegai lathes are very good - I almost bought the A20 toolroom lathe. We don't see many Japanese lathes in the UK. I have a 1964 Colchester Triumph Roundhead lathe. It doesn't look very pretty but there is almoszt no wear and it runs like a new machine. 7.5" centre height and will turn 24" in the gap - or 60cm! Pretty big. Only drawback top speed is only 1000rpm - not so good for small stuff with carbide tooling.
@ydonl4 жыл бұрын
Brilliant! I don't know very much, but the new lathe seems very well designed and built. And I was suprised that you scraped off most of the rust before the evaporust; it worked so good! Most people seem to just throw the parts in dirty, and it doesn't work as well. It's a simple thing, but... very nice!
@erewhonmuesli4 жыл бұрын
As much as I love my lathe, I have some serious envy of your new purchase. That Mori is in remarkably good condition. I'm glad that it's in the hands of someone as skilled as you are.
@VBrothers4 жыл бұрын
Spindle head looks like new. I am glad for you! Never sorry if you looking for better. It is natural for people. So keep that way! Good for you!
@ronwhite67194 жыл бұрын
Nice find on the Dmg Mori. That backlash can be fixed and its a great upgrade for you. Is the 4 jaw for this lathe? Awesome restoring job. Glad to see you are doing well. Your skills are right up there with Abom79.
4 жыл бұрын
Yes it came with a lathe
@barthanes14 жыл бұрын
That's a really nice lathe. You can hang a hammock in the corner and sleep over the lathe. No one could steal your tools. Or maybe build a bedroom over the shop.
@davidedwards41254 жыл бұрын
Evaporust is great, used it to restore a little Hobbymatt lathe i have. One thing, i didn’t see you oil over the chuck. Anything i diddnt soak in oil/WD40 went rusty very quickly after. New lathe looks great. Love the “heart break” pictures of the old one.
@TheArsonsmith42424 жыл бұрын
I like the new lathe. Both my Clausing and Logan have that same issue with the cross slide vs carriage directions needing to be reversed to go in the most common directions.
4 жыл бұрын
I think facing out and turning are in the same cutting edge on the tool bit.
@ROBRENZ4 жыл бұрын
Nice work on the chuck and really nice lathe! All the best, Uncle Robin
4 жыл бұрын
Thanks uncle Robin. How do you think about that Riken toolroom lathe. Should i bring it home and rebuild it. Really good price for that machine btw.
@timothyosborne82854 жыл бұрын
They are great lathes. Hope you give it a great home.
@mechniack4 жыл бұрын
Cá Lem your a super talented machinist, with a well organized shop. Very detail oriented. 👍✌😁 The world are full of the most wonderful people.
@Hermanb19154 жыл бұрын
Oh man, a restoration series coming up! Nothing better to ease the lockdown blues.....will stockup on popcorn and beer, polish the TV screen and get the sunglasses ready to soften the glare from the green paint😀
@keithhansen39634 жыл бұрын
That Moriseiki MS is one of the finest engine lathes ever made. Congrats
@chrisjennings45694 жыл бұрын
Congratulations! I'm not too sure how old that machine is, but whoever ran it before you was very experienced, cared about maintaining the obvious points, or the darn thing was just a dust collector for its life. I didn't see any obvious dents, dings deformations on the cross slide, gear changes and handle movements appeared smooth with clicks and no clunks or grinding, and mostly factory fresh backlash. ( True backlash needs checked in a different manner ) DMG MORI has a long tradition of really going the extra mile with their machines and are solid, reliable and a joy to use. You have a true jewel there and I can't think of anyone else better to own/operate that machine. (Outside of myself of course!) Oh, and one more thing, considering the attachments I see, that machine was designed for high production. You could make a lot of money with it. A lot of hard work tho.
@3dkiwi9204 жыл бұрын
That Mori lathe is beautiful man; can't wait to see it restored! It's always hard to say goodbye to a piece of gear you've put so much love into. Keep it up!
@MF175mp4 жыл бұрын
I have a Moriseiki MR2000G, it was looking really bad and almost all the paint stripped etc. But the ways looked perfect, and that's why I bought it. And partially for the toolpost with 15 holders. The ways both x and z are lubricated automatically so as long as you have oil in the reservoir and don't use it as a cylindrical grinder, the hard ways will have very long lifespan
@matthewperlman33564 жыл бұрын
I just got done commenting on you last video and then saw this one. I'm glad you were able to get a good lathe again, and from what you showed that does indeed look like it is in great shape. I really like the Hydraulic brake; that stops sooo fast! I have a new PM1440bv with the VFD inverter drive and it uses the inverter for braking. I love the inverter for the variable drive, but the braking action is so slow.
@thomasross84004 жыл бұрын
I’m glad you ended up with a good lathe. You are on the right path.
@darrenmartin21954 жыл бұрын
Glad it worked out with the new lathe. I got screwed over bigly when I bought my current lathe on an internet auction site. Some cowboys out there.
@izzynutz20003 жыл бұрын
That evaporust is some of the greatest stuff that's ever come down the pike,.. I'm really enjoying your channel and I have a great appreciation for you,,, you remind me of myself if you don't have it build it and you seem to have a pretty good bead on how things should be please keep up the great videos and good work.,
@electricalfive22484 жыл бұрын
0:43 I love that feeling when I have the garage door open and its pouring outside. something about being safe and able to work even in weather like that gives such a weird, but nice feeling. maybe im just a creep...
@scroungasworkshop46633 жыл бұрын
Nothing creepy about it, it’s just a natural way of feeling safe while the weather is crap. Same as snuggling up in a nice warm bed when it’s miserable outside.
@zukowski20234 жыл бұрын
Happy to see your hand has healed up nicely, and great job on the chuck restoration, very well done. The new lathe looks like it's in pretty good shape, the ways look nice, clean and true. It's a bit rough looking but what hard working machine room tool doesn't look like it''s been through a hard days work? Little elbow grease some time and lots of scraping and scrubbing and it will look like your old lathe in no time. With less (was a bit hard to see) than not even a tenth out on the spindle , you will have yourself a good machine once you dress it up a bit. Well done, stay safe and protect your hands! Cheers!
4 жыл бұрын
Thank you sir
@par4par724 жыл бұрын
Good trade. That Ikigai had problems. To bad. That Mori-Seki your going to LOVE !!! Great Machine !!!
@LionelFernandesAtelier4 жыл бұрын
Nice project Calem ! Good luck with all this crazy restoration ... Thanks to share this moment with us !
@aurelianmunteanu76804 жыл бұрын
This lathe is on another level! Enjoy it!
@patw9994 жыл бұрын
Sweeeeeeet. A new ( to you ) lathe. Too bad the other person was not honest about the lathes he had but I think this one is much better than the two were. Very nice, I am happy for you.
@therealsourc34 жыл бұрын
Apart from the rust and grime collecting over the years and the enormous backlash, this old lathe looks pristine. With some surface scraping on the slide carriage flats (i don't know what they're called in english) it will be a hell of a good lathe. Fellow machinist here; love your videos. You're doing great
4 жыл бұрын
Thanks man ;)
@user-rk7qy3do6l4 жыл бұрын
Good condition you are lucky, but it is a pity that there is no friction shaft and so little speed. By the way, it is also constantly raining in St. Petersburg.
@TheAyrCaveShop4 жыл бұрын
That's really a nice lathe....the major critical items are in great shape. The machinery gods were looking out for you. Your shop has really come a long way...looking great !! 👍👍
@richardcurtis5564 жыл бұрын
Your new lathe was worth waiting for. Best wishes on your planned shop changes - no one ever seems to go to a smaller shop once on that road.
@andyZ3500s4 жыл бұрын
It looks like the Mori Seiki was well taken care of by the previous owner. The way that you take care of your machinery this lathe should last a lifetime. It's almost hard to believe the condition that it's in. I'm happy for you!! Looking forward to the next video.
@autismosis694 жыл бұрын
Thank you for bringing us along for the ride on your new adventure!
@wojciech_migda4 жыл бұрын
What a beauty - the new lathe. Maybe you find the time to "restore" (paint and make nice is probably all is needed) it. Would love to watch it!!! Just looking at the gears made my heart go faster!
@nectouxpierre46344 жыл бұрын
Nice machine. This model seems to be quite popular like takisawa but I never saw one with my own eye. The short taper spindle nose is no very popular out there with the mounting screws but you know how to machine faceplates. Room is a common problem in very shop in every country!
4 жыл бұрын
It’s true man ;)
@physicsguybrian4 жыл бұрын
So looking forward to the expansion and the restoration of the new old lathe!!!
@allinrc33384 жыл бұрын
I feel like the lathe will experience a renaissance in your hands! And that it will help you get a new room too 😉! I look forward to a future restoration.
@mikemarler82244 жыл бұрын
Very sporty. Looking forward to seeing what it will do
@ilmondodimassi4 жыл бұрын
Hi Calem, find machine tools as if they were mushrooms. Compliments. When I was a turner, my C. N. C. was a Mori Seiki. Your lathe looks very well maintained
4 жыл бұрын
Thanks Max. How are you?
@ilmondodimassi4 жыл бұрын
@ I'm fine, Calem, I wish you all your dreams come true, my friend
@Rob_654 жыл бұрын
Nice job on the chuck and a very good lathe to join it with. All those machines you have, or had, are very lucky to have met you. Good luck with the update of the shop - I am sure it is worth to wait for the next shop update from you. I have seen different styles of video from you and I love this style too. All the best from the Netherlands!
@malcolm25014 жыл бұрын
Great to see you back again 😊
@frankcurley3 жыл бұрын
You are the "Andrew Camarata" in the machinist's world!
@MrLukealbanese4 жыл бұрын
Fantastic Ca, really great score. What a beautiful Mori Seiki lathe!! You can always build a skybed over it!!
@465maltbie4 жыл бұрын
Those are very good machines, and they are still being made and many parts will interchange. Currently being made in Korea by Whacheon. Thanks for sharing and while you will always have to do work on an older machine I know you can handle it. Charles
@GeoffreyCroker4 жыл бұрын
Ah, it's a good thing you walked away from the other two lathes. I look forward to seeing how you adapt your house to fit all the machines in. I know you're an architect so I'm sure you've been thinking about it constantly 😁
4 жыл бұрын
Geoffrey Croker almost every night lol. Thanks buddy!
@carlthor914 жыл бұрын
That lathe is a diamond in the rough. It will look awesome when you are finished. Best wishes
@cavemaneca4 жыл бұрын
Always good to see another video from you! I just picked up my own old lathe to restore recently, though I think mine will need quite a bit more work than yours...
@shawnhuk4 жыл бұрын
Bueatiful lathe. Ways look pretty good - clean! No galling or scoring. Having the other deals fall through is a bummer, but you definitely made the right choice
@mr.c63834 жыл бұрын
With your skill and your growing needs in your shop... is it about time to buy a larger place for the shop only,, rather than convert a bedroom? I am sure that you will need more space as time goes on, so why not do it now as I am sure that you will be getting more machines in the future
4 жыл бұрын
Im living in the city so space is luxury here. Only hobby so im doing the best i can. In the future if everything goes well i’ll move to countryside where i own 2 mountains and river lol
@dixonqwerty4 жыл бұрын
Nice purchase! That lathe seems to be a top quality tool. Can't wait to see the restoration video!!!
@woodscreekworkshop99394 жыл бұрын
That is a beautiful lathe! I am sure you will make it run as new in no time 👍🏼
4 жыл бұрын
Thanks uncle Yuchol. Hopefully it will be beautiful as your
@munkeyWITHbeard4 жыл бұрын
Legendary motorcycle racer and world speed record holder Burt Munro lived in his garage/workshop, bed beside his bikes and lathe, they even made a movie about him
@trabant2214 жыл бұрын
kzbin.info/www/bejne/n5mVo5h4rJ6No7M
@nebraskaman82474 жыл бұрын
You're making me want to buy metal working machines, and I'm still setting up my wood shop. The wife is not going to be happy 😂
@kazukarukelley4 жыл бұрын
Great looking new lathe! Sad to see the first one go, but the new one has a great look to it. Happy you were able to get one in very good condition. Thanks for the upload and I look forward to the next!
@CraigsWorkshop4 жыл бұрын
I cannot wait to see that lathe cleaned up. It looks like it's in fantastic condition. Great video and voiceover. Keep up the good work! :) Cheers, Craig
@keithhansen39634 жыл бұрын
The reason the cross slide works backwards is so that you can power feed then clean up the shoulder.
@koford4 жыл бұрын
looking forward to see you restore this lathe, love your video.
@RRINTHESHOP4 жыл бұрын
nice choice with the mori, you will like it. more space is a tough choice. you will do well my friend.
4 жыл бұрын
Thanks uncle Randy. A shop with granite floor, aircon, toilet, pink and purple paint, some cool pictures and paiting hanging around. Who need to sleep lol.
@RRINTHESHOP4 жыл бұрын
Cà Lem yeah who needs sleep.
@williammills51114 жыл бұрын
Great score, you are certainly worthy of it! Looking forward to next videos, thank you.
@cest73434 жыл бұрын
re 4 jaw chuck: 1. Too perfect restoration - much liked an appreciated :-D 2. You unveiled your secret chuck_scissors by mistake - now we got you! LOL! re morri: 1. don't feel too bad, just you pimp it up and soon enough you will sell it for an 500 mm x 8500 mm lathe 2. once that 8.5 m bed late goes in, i foresee your whole family sleeping on that bed, and the kitchen then goes shopified too... keep up the good work (excellent videos and editing BTW)
4 жыл бұрын
Lol. Thanks man
@codprawn4 жыл бұрын
Wow almost zero wear on the Mori - awesome!
@USM2474 жыл бұрын
So glad to see you again!! Your reasoning for selling your old lathe and getting this one is a very sound move. You have some work to do but overall, the new lathe looks pretty good. T truly admire your work ethic and abilities. Take care. :)
@werschkowdennis65334 жыл бұрын
Very nice Lathe Machines. 👍👍👍 Да, станок конечно дерзкий и геометрия просто супер.
@eduardovieira19194 жыл бұрын
THAT will look fantastic in green! Congrats, mate!
@lookcreations4 жыл бұрын
Nice work on the Chuck. The lathe looks like it’s an improvement on your earlier one. Sorry the two lathe deal didn’t work out, but I think you got the right deal in the end. Stay safe and good luck with your shop move around 👍😎
4 жыл бұрын
Thank you, sir. And im about to win the straight edge too :D
@lookcreations4 жыл бұрын
@ fingers crossed :-)
@philallen96504 жыл бұрын
Mori Seiki make some good quality lathes...i think the older ones like yours are better made than the modern ones.
4 жыл бұрын
Sure. They dont reintroduce that kind of quality anymore. Back in the day machines were made to last a lifetime.
@123232ism4 жыл бұрын
Thanks for sharing your talents! Looking forward to your magic on the new lathe.
@heliarcweldandmachine4 жыл бұрын
mate we all want to live in our shop surrounded by our machines. well done
@ericmartin57204 жыл бұрын
I hope the lathe will get the green colors!
@ZenMinus4 жыл бұрын
A great purchase and a great lathe - soon to be even GREATER in your hands :-) I'm looking forward to watching the progress and the items made on this lathe. Best wishes :-)
@dlavway14 жыл бұрын
Excellent video; your work is always worth waiting for. I have such admiration for you and the zen way you go about being an incredible machinist and human being.
@matc874 жыл бұрын
those ways look amazing and the runouts look tight. what a beast of a machine..cant wait to see it in green
@Dirtstroyer4 жыл бұрын
Great video as always Ca Lem...really admire how quick you can arrange and find a different machine when you need to. I'm somehow to much in love with my machines and I hardly seel or change for another... this course is on me ;)
4 жыл бұрын
Theyre selling machines on the street here. Like fishes and chickens. Lol
@crusiethmaximuss4 жыл бұрын
I'm thoroughly impressed. Yes, sacrifice is a necessary pain for success... I know your pain all too well. Stay focused, and stay strong.
@LarrysMachineShop4 жыл бұрын
Very Nice, I am sooooo Happy you got another lathe, I look forward to all the new content.!!
@nta6994 жыл бұрын
Good luck with recovering your bedroom ;-) A beautiful piece of machinery.
@thecake._.wasalie4 жыл бұрын
Bringing another one back to life! Lucky machine.
@bartharkemametalworks22994 жыл бұрын
Very nice Lathe! I got the same problem with my Okuma on the power feed direction of the cross slide. There are a lot of similar design points. I think yours is even better on the ways and slides. Are you going to paint it? I plan to do this in the future. My Okuma video will be out in a week. Will also do some runout test.
4 жыл бұрын
Thanks man. I’ll repaint and srcaping the compound dovetails, cross slide as well. Definitely will take it apart and give it some love.
@mongolike5134 жыл бұрын
Ca Lem you have done it again. Both chuck and lathe are in great condition. Congratulations and thanks for sharing. Can you build up?
@Jarni19794 жыл бұрын
this lathe is a miracle
@anandarochisha4 жыл бұрын
Very nice lathe..good job !
@TheWrate4 жыл бұрын
Thanks for the tour of your new lathe, it's a beauty!