2021 Aprilia RS660 | Carbon Smith Velocity Stack & DNA Filter Install

[@WarrensAdventures]

Looking forward to seeing the Dyno numbers!!

[@SongJLikes]

Alright, I just gotta say, if you are getting the UpMap for your rs660, get the Sprint P08 air filter… Gabro tuned the maps to a set up with that sprint air filter specifically… and once I got a sprint air filter installed, the tune lined up perfectly… no more wheezing on the front end , the transmission/quick shifter is WAY smoother, and 1st and 2nd gear are now far more usable than ever before… and I swear, fuel consumption is more efficient even though it feels like more power is being generated The vibrations are more cohesive/symphonic now, though a bit heavier than before my CR-T/flash tune/air filter install

[@A7XBilly]

Allrighty! DNA Greek Filters installed in the beautiful RS660! Greetings from Greece!!🇬🇷

[@deweysturgill6220]

Just shifted the powercurve upwards with the shorter trumpets. The only advantage is the slightly better entry radius the carbons have. Definitely an item that would have been nice to dyno test with an ecu reset, before adding the exhaust. The air filter is pretty good noticed a very slight gain mid to top with mine. It will actually improve after the ecu adjust fuel trims to it. Great content as always.

[@affitness1]

Pre-ordered my black/red one yesterday! #5 of 12 coming to WA on the 1st round of shipments, can’t wait! So glad I found your channel; this makes my upgrade/customizations so much easier to choose, thanks for great content!

[@kku487]

@@CaliMotoTV hi man, sand me the web for buy it pls

[@flybyguy1450]

Shorter velocity stacks should lend towards improved intake scavenging at higher rpm. Might net you a few horsepower when combined with a proper exhaust and tune. Can't wait to see the final hp and tq numbers!

[@manufitnss1025]

making those changes with the limited bike, will you notice the difference?

[@fausch]

Really good DIY video man, subscribing for more!

[@brandonfloyd4962]

Your stacks need to be swapped with shorter on the left because it won’t fit correctly on the right due to the airbox has a bump that holds it up from fitting all the way in.

[@49Motors]

Just ran into the same issue, checked the video and his left side stack is seen not making full contact with the bottom. Thought it was just me

[@allthekidsareright]

Do you have carbon smiths? did you notice an improvement?

[@SteinerSE]

Just watched another video of someone installing the SC project exhausts on a 2021 RS 660 and they seemed to conclude that removing the radiator when installing the exhaust was the way to go. (very restricted room and risk of damaging the radiator). Listening to SCP exhaust in yet another video and it sounds soo sweet.

[@hotbox76]

Not required, just remove the three screws holding the radiator and it hangs far enough to provide plenty of room. No need to remove the radiator at all. Helps to have a folding ratchet.

[@ManAndMachine23]

No need to pull the whole tank off,just take the side black plastics off,same one you take off for shock adjustment,lift the tank enough to get a wrench to the bolt, I used a shop towel under the tank to keep the tank up,while I worked. Thank for the vid man!

[@CaliMotoTV]

👍

[@mattyjlove7157]

Thanks for your work. Does the intake noise is now louder? I am hoping so.

[@CaliMotoTV]

Yea it got a little louder.

[@MrDavidRacer]

great videos 👍🏻👍🏻👍🏻 could you make a video about the spark plug change on the RS660? Greetings from Austria 🇦🇹

[@CaliMotoTV]

Sold the bike sorry.

[@gamingradius8057]

When is the 800cc big bore kit coming??😂😂😂

[@JuanAntonioAdrover]

Hey Bill! I have been in touch with SC lately and they recommend remapping. SC does not provide a map. Which one will you install? Thanks!

[@JuanAntonioAdrover]

@@CaliMotoTV I see, I can’t wait to see the sc installed with the stacks and filter 😉

[@JuanAntonioAdrover]

@@CaliMotoTV I am holding my decision about ordering the Akrapovic or the SC and it depends on you an Victor! Can’t wait for those vids! Thanks for your content! 😉

[@Thept09rider_]

Cali do you know if this dimpled velocity stanks are only installed with stock exhaust? Other question, can we install this kit in a Tuono 660?

[@dariopellegrino2668]

Do you need to pump the gas out or is it possible to do it with gas inside the tank?

[@johnswanson6790]

I’m late to the party here, and at the risk of asking an old question, does the work you’re doing void any warranty on this bike?

[@benjaminhatfield5606]

excellent video, would it be possible to list where we can purchase the items from? thank you

[@kwsk5660]

What happens for the velocity stack screws if they get loose? 🙂 Aftermarket ones may be should have the same securing as in OEMs

[@rudedog3529]

They should have, at least , used a drop of Blue Loctite on each screw.

[@kwsk5660]

@@rudedog3529 I would do the same, actually had long thinking about the similar case when changed air filter to Fireblade

[@invalidscope3602]

How does the sound change when driving when you accelerate? as soon as you accelerate with the 660 (under load) a deep sound comes out. how about the new air filter? Volume up? different sound?

[@needmetal3221]

Inverted golf balls. I'm curious about the numbers too

[@Mrfacts_ge]

Nice introduction 😍👌😎💥

[@400chevlc]

What kind of HP improvement are you expecting?

[@Itzp4tt]

Cali Moto I have the same bike as yours. But the other day I broke my safety clutch switch installing the ASV levers, and order the part do you think it will be hard to out them on.

[@Itzp4tt]

@@CaliMotoTV thank you hopefully it get here soon haven't riden here that much. Loved what you doing on the RS660. Hopefully to see you at the track one day.

[@daveyt4802]

What fuel is recommended for this bike?

[@OkWieso]

where did you get your tank cap?

[@Bhavincis]

Liked and subscribed.

[@andreabasaglia8699]

Grazie!

[@Onei1y]

Hi there, is that tank Alloy ..?

[@CaliMotoTV]

Think so?

[@pknoexx2968]

Hello from Germany. Why is the left stack taller than the right one? It's in the same airbox. Just a technical question. ;)

[@lametraserillos1]

i think is because 270º engine firing , and balance the air flow inside engine ...

[@villea1841]

That air filter needs to be oiled before you put it in the bike.

[@valentinebibi]

시벌ㅋㅋㅋ 탱크 들어내는게 일이네

[@alexsevo6]

dyno dyno dyna dyno

[@CaliMotoTV]

Bike got sold sorry

[@PEZ1514]

Ruin the bike for 2 extra hp lol.

[@nicrobinson5543]

Ruin the bike??