Ugh! I love companies like this that make things SO easy to understand and comprehend for us DIY guys. You’ve just earned yourself a new customer, I’ll be purchasing this kit VERY soon! Thank you!
@CaliRaisedLED4 ай бұрын
Thank you and we are happy to hear that! If there is anything we can ever do to help please reach out :)
@JohnMichaelFloyd2 жыл бұрын
Awesome tutorial, especially the follow up video for switch installation! It was a breeze. Only thing that was skipped in the video was installing the washers on the bolt before adding to the light bar. Super easy install for a first timer
@CaliRaisedLED2 жыл бұрын
Great to hear, Tag us in some photos on social media!
@luispaniagua51453 жыл бұрын
I have to say your installation video is superb Very clear easy to follow good job!
@milanobus3 жыл бұрын
Watching this 20 minutes video probably saved me an hour of trying to figure it out.
@CaliRaisedLED3 жыл бұрын
Glad it helped you out!
@johnsonvang71694 жыл бұрын
Great video and love the way you slowly explain everything.
@spacebear49 Жыл бұрын
This video absolutely helped. Though had to get creative with the wiring. Installed the switch in the middle under the HVAC controls, and the wire harness barely reached. Ended up cutting the connector off and spliced the two ends together, and an OEM switch at the end. But it all ended up working fine. Also, just a heads up to anyone with a manual... there is a little less open space under the hood to secure the relay, as the clutch fluid reservoir is there. Also fishing the wire through the firewall is A LITTLE more tricky, as the clutch pedal assembly is right where the wire comes through.
@CaliRaisedLED Жыл бұрын
Glad we could help you out with this install!
@VietLe-USA2 жыл бұрын
After watching this video, I would consider buying your product as a thank you note to a job well done explaining all the details of installing the light bar. I've watched close to 10 videos showing how to install the light bar. Most of these videos would skip out things that the installers assume others would know. Sadly, some of us don't. We want to see the details so that we don't screw things up. As a result, a small suggestion to an otherwise perfect 10 video is that you should have finished the installation by completing the connection to the battery. Please note that things that seem mundane to you can be not so mundane to the newbies.
@CaliRaisedLED2 жыл бұрын
Thank you for the positive comment. We try to make things as simple and appealing to everyone. When we do another video we will take you comment into consideration!
@brandonbrown9273 жыл бұрын
Just installed my Auxbeam light bar with these mounts. Thanks for the instructions, very easy to follow. You weren't joking about tightening the bolts on the side of the light bar though, that is quite the awkward angle to get your wrist in there!
@michaelguzman12863 жыл бұрын
Did you put your wind reflectors back on or leave them off also?
@brandonbrown9273 жыл бұрын
@@michaelguzman1286 I left them off, you can't really fit them back in there with the bracket installed.
@1989inception4 жыл бұрын
I really need this exact model in amber light
@commonintel3 жыл бұрын
you can buy amber lamin x film if you cant find this model in amber
@readplanet239 ай бұрын
Thank You for the educational and entertaining instruction video. It will definitely help with the install of this LED light bar modification. Keep up the good videos. Have A Good Weekend! 🛻🚚🚛
@edwardrtt Жыл бұрын
Nice people to deal with, very easy to install with video
@CaliRaisedLED Жыл бұрын
Thank you for the kind words!
@jdude25097 ай бұрын
do you know of a way to modify the wind deflectors so it is possible to still use them after the light bar is installed? I live in Calif and I want all the air possible flowing towards the radiator in the summer.
@carlos.7510 ай бұрын
Awesome video, does the light in that location restrict any airflow that can have an affect with any type of cooling?
@edwinlainez93394 жыл бұрын
I already order mines... am so happy
@carlmatula82186 ай бұрын
Bought mine today. Hope to get it soon. 😊
@DjSmiles.3 жыл бұрын
I feel like if I order this kit I'm gonna need to order that Milwaukee Ratchet tool as well?!?!
@H20Spy2 жыл бұрын
FACT!
@alserrette2 жыл бұрын
Would have been nice to see the lights work with the headlights in the dark as well. Where do you install the relay bracket?
@CaliRaisedLED2 жыл бұрын
If you look at the engine bay it would be located on the drivers side(right) Here is a video to visualize where it is. kzbin.info/www/bejne/qZ6nYp2Obsp9psk
@FranciscoGalicia4 жыл бұрын
AWESOME VIDEO. THANKS FOR SHARING
@bigriver32784 жыл бұрын
Can the wind deflectors be reinstalled after light bar installation, or do they interfere?
@CaliRaisedLED4 жыл бұрын
Yes, they can be trimmed and re installed.
@brodiefiedler7031 Жыл бұрын
What do u do with the relay? Just leave it there? Screw it down to something or what?
@leighhauck88062 жыл бұрын
What is the downside (if any) of leaving the wind deflectors out versus putting them back in?
@CaliRaisedLED2 жыл бұрын
The downside is that the rack will be louder without the deflector than with the deflector.
@neckxfire73793 жыл бұрын
So the M6 is for mounting the light bar as are the split washers? This isn't mentioned in this video.
@CaliRaisedLED3 жыл бұрын
Yes, The M6 bolt, lock washer then fender washer are used when mounting the LED bar to the brackets.
@Nords55511 ай бұрын
Yeah I had to come here to see the order of the washers since the video missed it. Does the split washer lock against the other washer, then bracket then light bar? Or does the plain washer sit between bracket and light itself? Can't find a pdf or more info on the site showing an exploded view of the parts.
@raymondlegault82784 жыл бұрын
Very well explain thank you
@numbr2luder4 жыл бұрын
I wanna see the results. Night time, with it on and with it off
@AXNJXN14 жыл бұрын
AbsolUTELY pointless without this. Couldn't agree more!
@1tdillon2 жыл бұрын
Really detailed video! Question, has anybody used silicon to seal the Cali light bar? If not, has anyone gotten moisture or water inside the light bar? Debating whether or not to seal the light before install. Thanks.
@CaliRaisedLED2 жыл бұрын
I haven't heard anyone using silicon to seal the bar.
@1fsttoy2 жыл бұрын
I’m interested in this setup but I have a winch mounted in a slimline bumper. I’ll have to look and see if there is still room.
@CaliRaisedLED2 жыл бұрын
Unfortunately we cannot confirm that it will fit or not because all wenches and bumpers have different dimensions. If you happen to order it, Let us know if there is still room!
@OutdoorBlitz Жыл бұрын
Did you find out if there was an issue doing this? Just got that same bumper and was going to do a smittybilt x20.
@shannondixon37672 жыл бұрын
The video doesn’t clearly state what the M6 bolts, washers and split washers are for. I’m assuming those were the bolts you used to attach the bar to the bracket but what about the washers?
@CaliRaisedLED2 жыл бұрын
Starting at 10:09 is where the video explains the M6 bolt and washer going into the light bar. If you have any more questions feel free to shoot us an email! info@caliraisedled.com or call us (888)-385-5036.
@Guywhoquestionsthings2 жыл бұрын
Just recently purchased. Brackets are completely different. Precision guess work I guess.
@CaliRaisedLED2 жыл бұрын
Hi there!! This is not good - please contact us with your order number and we will get you squared away!! info@caliraisedled.com
@Guywhoquestionsthings2 жыл бұрын
@@CaliRaisedLED I bought the low profile flush fit. Having trouble now getting the light bar to stay at the desired angle. Is it really just the one bolt on each side that holds it in place? Feel like im tightening too tight
@CaliRaisedLED2 жыл бұрын
@@Guywhoquestionsthings Yes, it is one bolt that will change the angle of the light bat. because the light bar is in a tight spot. You won't get too much e
@rhyezkieable4 жыл бұрын
Question, I already got a cali raised ditch lights installed. Can i overlap the battery terminal of ditch lights and light bar? Is it not gonna blow any fuse or drain the battery?
@stacksmasher3 жыл бұрын
That is the great thing about LED.... it takes 1:10 the power of the old stuff!
@OggaDugga Жыл бұрын
Really on the fence between the combo or spot. I’m currently installing upgraded fog lights so I’m wondering I’m contemplating the spot light.
@FitzXVI2 жыл бұрын
i have the universal button switch and hooked the wires up as in the video but the red light on the switch is constantly on even when truck off. what can i do
@CaliRaisedLED2 жыл бұрын
Hello PC, It sounds like you need some help. If you can provide us some photos and email them to the email provided below we can better assist you! info@caliraisedled.com
@agawdsparadise3782Ай бұрын
Does taking off the wind deflectors take off some mpg?
@hawaiingecko9 ай бұрын
I've done everything exactly like this video/the directions say to and my light bar is still loose
@fireman58792 жыл бұрын
it`s too bad the fuses don`t fit on the relay holder securely, had to zip tie mine on
@jrcostudios2 жыл бұрын
What size of Allen keys do I need for this mine didn't come with any
@CaliRaisedLED2 жыл бұрын
The Allen key needed is a 5/32 or 5mm. Let us know if you have any further questions.
@stacky512a2 жыл бұрын
looks like i will be having someone else do this install
@alserrette2 жыл бұрын
DOES THE INSTALL WHISTLE at high speeds, 🤷
@CaliRaisedLED2 жыл бұрын
This install does not whistle at high speeds due to the design! Please let us know if you have any other questions.
@DavidTPhan3 жыл бұрын
How much DC current at 12V required to power the 32" and 42" LED bars?
@CaliRaisedLED3 жыл бұрын
Hi David, 32" SLIM SINGLE ROW LED BAR: IP Rating: 68 Watts: 300 LEDs: 60 Lumens: 30,000 42" DUAL ROW 5D OPTIC OSRAM LED BAR IP Rating: 68 Watts: 400 LEDs: 80 Lumens: 40,000 Hope this helps, head over to our website and chat with us if you have any more inquiries, we would be happy to help.
@DavidTPhan3 жыл бұрын
How much DC current at 12V required to power the 32" and/or 42 LED bars?
@CaliRaisedLED3 жыл бұрын
Hey David, Great question! The lights can run on 12-32v DC Power. Those bars draw roughly 15-20A.
@outdoororiginal43644 жыл бұрын
Who’s LED bar is brighter ? Yours or the diode dynamics LED bar ? I only ask because I want a bar for my truck but cannot decide which is brighter and better thanks.
@CaliRaisedLED4 жыл бұрын
Each light is different so it depends on which one you are referring to. Check out the product descriptions when you are in each product!
@shannondixon37672 жыл бұрын
Is it necessary to push that cooling system tubing back if you only have a single row light bar? That double row bar is much larger. Just trying to save time.
@CaliRaisedLED2 жыл бұрын
You would not need to push the cooling system tubing back in order to fit the dual row light bar.
@policy825 Жыл бұрын
Either I got the wrong bracket, or you guys switched the style? Not the same as ebay was pictured on amazon and not like thus video
@kvnkorean4 жыл бұрын
This will work with 2020 Tacoma, right?
@CaliRaisedLED4 жыл бұрын
It's a 2016-Current model, so yes!
@chrisdeantonio1498 Жыл бұрын
For someone using an sPod to handle all accessories and switches, how would I wire this up using the supplied harness?
@CaliRaisedLED Жыл бұрын
Feel free to reach out to our customer service team. They will be happy to assist you! info@caliraisedled.com
@matthewfailor25023 жыл бұрын
Is this install similar on the 2013 Tacoma?
@flufnug Жыл бұрын
So the wind deflectors don’t fit back in
@CaliRaisedLED Жыл бұрын
Please contact our customer support team! infor@caliraisedled.com 888-385-5036
@mistert7802 жыл бұрын
Noob question but how do you turn them on? Do they always run when your lights are on or what
@CaliRaisedLED2 жыл бұрын
The light bar is directly wired hooked up to a switch!
@janopoirier45244 жыл бұрын
Did fit only with strait led bar (32inch) ? or (32inch) curve led bar will fit?
@CaliRaisedLED4 жыл бұрын
You can use a curved bar.
@gramirez3 Жыл бұрын
hey yall I installed a diode dynamics lightbar. I have flickering or vibration issues. I have rewired and ordered another lightbar. to see if it was the issue same thing. It only flickers when i’m off-roading or going over something bumpy does anyone have any ideas how to fix it?
@CaliRaisedLED Жыл бұрын
Your best bet its to contact their customer service to see if they can help you with the wiring issues.
@sworks71243 жыл бұрын
Do the wind deflectors go back in or do you leave them out?
@CaliRaisedLED3 жыл бұрын
We leave them out. They can go back in but you have to trim them.
@chip91772 жыл бұрын
Anyone know if this setup will work using Diode Dynamics's brackets? Id like to do this install & be able to the wind deflectors back in
@chip91772 жыл бұрын
The DD brackets do work & allows you to re-instal the wind deflectors.
@masonbaker863 жыл бұрын
how many lumens?
@CaliRaisedLED3 жыл бұрын
300w 30,000 lumens.
@michaelgonzales4304 жыл бұрын
Do you have military discount & if not, what about credo discount lol class of ‘15
@trproductions50643 жыл бұрын
does this kit come with switch and wire harness
@CaliRaisedLED3 жыл бұрын
We have options to include those and to not -- check out the product listing! caliraisedled.com/products/2016-2021-toyota-tacoma-32-lower-bumper-hidden-led-light-bar-kit
@bradencarter7596 Жыл бұрын
What should we torque the crash bar mounts to?
@CaliRaisedLED Жыл бұрын
The crash bar bolt is a Toyota bolt therefore we recommend our customers to look up their specifications.
@Nords55511 ай бұрын
Find the original specs, but since this is only one of three bolts, and it only takes impact loads, the nut isn't doing any serious work besides keeping the bar on. Not like it's taking expansion stress like a hanging threaded rod with stuff stuff hanging from it.
@ItchyPilauBotoАй бұрын
Will this work with a 34” ?
@CaliRaisedLEDАй бұрын
Our light-bar is 32" end to end, so I don't think a 34 would fit correctly!
@ItchyPilauBotoАй бұрын
@@CaliRaisedLED :(
@angelcbarbosa4 жыл бұрын
How much you charge for the bar installation?
@CaliRaisedLED4 жыл бұрын
Angel Barbosa we charge $150 to install this kit.
@edwinlainez93394 жыл бұрын
@@CaliRaisedLED where is your adress so i can go and install one for my tacoma?
@fantasytensai3 жыл бұрын
why is there no details on 1. where to attach the relay, 2. where to attach the positive terminal of the battery and the ground, 3. showing actually running the wire through the firewall because that's probably the most annoying part of the install without proper tools
@CaliRaisedLED3 жыл бұрын
Were sorry you are having trouble. Please feel free to contact us if you still have trouble.
@fantasytensai3 жыл бұрын
it's cool I found other videos on KZbin to help. Just found it weird how you guys were EXTREMELY specific with the bracket part but just completely flew by the wiring part.
@CaliRaisedLED3 жыл бұрын
@@fantasytensai we are in the process of filming new videos for people to better understand how to assemble our products
@ChrisTripp4 жыл бұрын
Normal man arms cannot fit into the tiny area to thread the screws into the light bar. Enlist a girlfriend or drop the bumper. Trust me.
@shaunmchugh67193 жыл бұрын
Darn 300 bucks ill pass
@Keeping6_ Жыл бұрын
That’s actually pretty cheap for 30,000 lumen light bar and including mounts. I just bought at 40” bar for my roof and it’s was $800. You get what you pay for.
@krasnaludek2984 жыл бұрын
Get a Ford Ranger - rolling a Toyota in Texas? Really man - come on. I’ll keep it polite, but that’s just wrong.
@Speedster27073 жыл бұрын
From Toyota: The Tacoma is assembled at Toyota Motor Manufacturing, Texas (TMMTX), in and Toyota Motor Manufacturing, Baja California (TMMBC), in Baja California, . Soooo...they may not all be made in TX, but some are a product of Texas and what's wrong w/supporting Texan labor?
@toeknee4B11T3 жыл бұрын
Sorry we don’t like to buy Garbage trucks
@Nords55511 ай бұрын
Lol, these reliable trucks are built closer to Texas than whatever crappy American "Fix Or Repair Daily "truck you choose...
@mr.k99354 жыл бұрын
Is there any chance this light bar and location would be compatible with a low profile steel bumper with a winch? Specifically a southern style offroad slimline?