Cambering Machine of H Beam and I Beam with Hard Way

Bending an H beam or I beam in the hard way using a hydraulic press involves significant force and proper techniques to achieve the desired shape without damaging the beam. The hard way refers to bending the beam against its strong axis.
www.anglerolle...
Here are the basic steps involved in the process:
Preparation: Ensure that the beam is properly supported and secured before starting the bending process. Safety precautions, such as wearing appropriate personal protective equipment, should be observed.
Selection of Hydraulic Press: Use a hydraulic press with adequate tonnage and capacity to bend the beam. The press should be equipped with the necessary tooling, such as specialized dies or bending tools designed for H beams or I beams.
www.anglerolle...
Heat Treatment (Optional): Depending on the material and its thickness, preheating the beam might be necessary to reduce the risk of cracking or damaging the material during bending. This step is particularly essential for high-strength steel beams.
Bending Process:
Place the beam horizontally on the press bed with the section that needs to be bent facing the bending tool or die.
Gradually apply pressure using the hydraulic press while continuously monitoring the beam's response.
The bending process may require multiple passes, gradually increasing the pressure to achieve the desired bend radius.
Ensure the bending is done uniformly along the length of the beam to prevent deformities or uneven bends.
Post-Bending Inspection: After completing the bending process, inspect the beam for any defects, cracks, or irregularities. Ensure that the bend radius and angle meet the required specifications.
www.anglerolle...
Cooling and Stress Relief: Allow the beam to cool naturally or use controlled cooling methods to relieve any residual stresses that might have built up during the bending process. Stress relief helps prevent structural issues in the beam.
Quality Control: Perform quality checks on the bent beam to verify its structural integrity and dimensional accuracy. This may involve using measuring tools and techniques to confirm that the bend meets the specified tolerances.
It's crucial to follow manufacturer guidelines, industry standards, and best practices when bending H beams or I beams in the hard way using a hydraulic press. Working with an experienced operator or seeking advice from professionals knowledgeable in metalworking and structural bending can also be beneficial to ensure a successful bending process without compromising the integrity of the beam.

[@kumarravishankar172]

location please

[@lionlu4232]

China