Camper Van Mercedes Sprinter Expand ver. 2

PATRONITE: patronite.pl/p...
Mercedes RWD L2H2
PL
Jeśli wsparcie będzie wysokie zakupię samochód dostawczy i na jego bazie zbuduję samochód kempingowy. Cały proces projektowania i budowy będzie nagrywany i powstanie obszerny materiał wideo. Na koniec budowy wykonam jazdę próbną w czasie której sprawdzimy działanie wszystkich systemów. Wszystko będzie rejestrowane i powstanie również materiał wideo. Ostatecznie samochód zostanie przekazany w formie loterii. Każdy wspierający będzie mógł wziąć udziała w loterii. Ten kamper może być Twój!
EN
If the support is high, I will buy a delivery vehicle and build a motorhome on its basis. The entire design and construction process will be recorded and a comprehensive video will be produced. At the end of the construction, I will perform a test drive during which we will check the operation of all systems. Everything will be recorded and video material will also be created. Ultimately, the car will be donated in the form of a lottery. Each supporter will be able to take part in the lottery. This motorhome can be yours!

[@shenmengwei]

May I ask which software this was made with?

[@pionier_campervan]

Blender 3D

[@sylvioks]

Nice!! How can I get a 3d file of the sprinter 3l2h?

[@pionier_campervan]

You either build the model yourself or buy it.

[@sylvioks]

@@pionier_campervan but where can I buy it?

[@pionier_campervan]

I have one in my database. Cost $200. If you are interested, write: [e-mail].

[@Eduardo_Espinoza]

Wait, Do the slide doors still work when expanded?

[@pionier_campervan]

No. They are permanently closed. Of course, you can make them sliding, but why?

[@agentcarbunkle]

@@pionier_campervan going to need a door to get out of other than the two front ones. I take it that's what the open panel is on the sliding door. So it all needs to slide out to use. So no stealth camping in this van.

[@martinkelly9763]

Can we see one already built ??

[@pionier_campervan]

As of today, no one has signed up for the project. However, I saw a project on Polish KZbin that has been implemented. Regards.

[@godsgym777]

Can u give a link to the polish youtube channel? ​@@pionier_campervan

[@BobcatDima]

А вход в Автодом где?

[@pionier_campervan]

посмотрите внимательно все видео.

[@vladimirmartinov7282]

Как всегда хорошо Интересно увидеть подобный проект с прицепом . 1.5*2.5 метра

[@pionier_campervan]

Спасибо за ваш комментарий, и я приглашаю вас подписаться на канал KZbin. Будет больше проектов.

[@vladimirmartinov7282]

@@pionier_campervan я подписан 🥰

[@leonardotaiger6954]

Отлиный концепт но воплощение в жизнь этого проэкта будет не просто, хотя возможно, смотря кто возьмётся это реализовать 👍👍

[@pionier_campervan]

Это не большая проблема. Я уже видел готовую машину с таким решением. С уважением.

[@mickkirton7943]

Looks rather drafty to me with them big gaps on slide outs

[@pionier_campervan]

Of course you are right. This is a project, but in the construction there are supports used to support the sliding parts. Best regards.

[@tomasznadolski9616]

super

[@pionier_campervan]

Dziękuję za opinię i zapraszam do subskrypcji. Będzie więcej projektów! Pozdrawiam.

[@Lizsolim]

Price, please

[@pionier_campervan]

As of today, I can make a 3D visualization for you, adjusting the interior of the car to your needs. Price 250 Euro.

[@roccosautotech]

Pop Top ?

[@pionier_campervan]

Thanks

[@Lizsolim]

Se sabe el precio?

[@pionier_campervan]

En primer lugar, gracias por tu opinión. Creo diseños de autocaravanas gratis. Cualquiera puede usar mi diseño para sus propios fines. No dude en suscribirse al canal de KZbin. Habrá más proyectos de este tipo. Saludos.

[@pionier_campervan]

Todavía no tengo una valoración de este modelo porque nadie me preguntó por él excepto tú.

[@moacirpires1303]

Good afternoon, I follow your channel, a question about this project... How is the structural part of the van, is it not compromised? Gratitude

[@pionier_campervan]

First of all, thank you for your opinion. When designing this model, I assumed that the rear part would extend from the same aluminum sheet as the whole car. So it's light. Of course, the walls will have to be reinforced with ribs. Additionally, underneath the pull-out part, there will be a pull-out support that will stiffen this part while sleeping. It's just a concept at the moment. Greetings.

[@markpriestley9977]

​@@pionier_campervan Can't believed I found this just recently, as I've been thinking of slide outs on a conversion of an iveco daily., using a twin opening side door version and thinking of using a trimmed rear of a donor shell to create a rear slide out. Hopefully incorporate the rear doors to still be operational. Great work, hope its going well...

[@pionier_campervan]

Thank you for your comment. Have fun building it. When you're done, share the result. Regards.@@markpriestley9977

[@user-gb6nm2eo6z]

Show, top !

[@pionier_campervan]

?

[@user-gb6nm2eo6z]

@@pionier_campervan ?

[@VanGoWanderlust]

My guess is that the way the back slides in and out of the van, the top of the van has to be unmodified. No fan vents or AC. MAYBE you could put solar, but you'd have to be careful with routing the cables so they don't interfere with the back sliding in and out.

[@mr.evgene]

👍👍👍nice!

[@pionier_campervan]

Thanks.

[@استثمارعقارات]

this is not doable due to the big heavy weight

[@pionier_campervan]

There is already such a car in Poland. The weight problem is solved by lightweight materials. Search KZbin and you will see how it is solved.

[@FreeMansWay]

Or just buy l5 h3 sprinter 😂

[@pionier_campervan]

The biggest Sprinter is a big problem. Better the L2H2 version.

[@FreeMansWay]

@@pionier_campervan and what is the problem?