The roof panels are awesome! Do you secure them straight to the pillars with sheet-metal piercing screws or do you use wood joists?
@theplyguys5 ай бұрын
aye straight to the roof!
@guinnesslover29704 күн бұрын
wher do you store your quilt and 4 pillows and toilet and cooker etc ?
@theplyguys3 күн бұрын
the cooker goes into the top drawer of the bruich beag kitchen pod, all covers go into the clachan wheel arch unit on the passenger side, loads of room for everything!
@SP_4_mountain26 күн бұрын
Amazing work Do you do the lower bulkhead for a t6 ??
Nice van, good job - but for goodness sake, pull your trousers up !
@theplyguys Жыл бұрын
haha thanks!
@mohamedzulkifly89662 жыл бұрын
Thank god i find out this channel/subscribed👍
@stefanobattaglia43102 жыл бұрын
Hello, great conversion!! What wheels and tires did you install?
@theplyguys2 жыл бұрын
thanks!! Alloy wheels - 16" Black Rhino Armor Tyres - General Grabber AT3 225/65/16
@stefanobattaglia43102 жыл бұрын
@@theplyguys thanks 🙏
@poloparker12 жыл бұрын
i can't find the words to describe how original and simple it is 🔝 have a similar work (with exactly the same ford trail in black) ahead of me in june/july and it looks like I'll copy your valuable idea 😉✌😉
@theplyguys2 жыл бұрын
Ah cool, good luck with it and thanks for the comment!
@66clarky2 жыл бұрын
I have recommended you to a few guys at work , Vinnie got a long box/bed done in his Ford . I have a LWD Custom and looking for something like this , I will have to come through to discus , great job 👌
@theplyguys2 жыл бұрын
Thanks man! Aye drop us an email at info@theplyguys.co.uk or give us a call!
@1985goldie Жыл бұрын
It’s a fantastic set up this. I’ve got a call booked with you guys to look at a sinilar set up except i’m not a mountain biker so i’ll be utilising the space differently. I’m hoping you can supply and install within my budget and if not, i can at least get the bones of it installed then get the rest when I can! Great work!
@mohamedzulkifly89662 жыл бұрын
Is it possible to fabricate for me? What should i do? By the way, i'm from Malaysia.
@theplyguys2 жыл бұрын
thanks for the comment but sadly we cant ship that far yet. hopefully soon though!
@mohamedzulkifly89662 жыл бұрын
Do inform me.
@mohamedzulkifly89662 жыл бұрын
Anything that could fit in Nissan NV200?
@AxelFoley666 Жыл бұрын
How do you secure the bed and storage units to the floor?
@theplyguys Жыл бұрын
we can either strap them to existing d-rings or use insert screws and m8 bolts into our 12mm floor
@jillwklausen2 жыл бұрын
No bathroom, so it's a no-go for my taste, but I can see where a dude would like it.
@theplyguys2 жыл бұрын
we also provide a toilket box for a thetford 35 portable toilet which can also be used for extra seating options, but the bushes are always an option!
@MACKCATHY Жыл бұрын
Is the floor not secured to the van, and how are the units secured to the floor...
@theplyguys Жыл бұрын
The floor is secured with batons and the furniture with m8 bolts
@worldofrandometry6912 Жыл бұрын
Did I miss lighting and heating? Was that a toilet in the drawer? Otherwise a decent day van.
@theplyguys Жыл бұрын
Hey thanks for the comment! We have a diesel heater under the passenger seat powered by an Eco Flow River Pro uk.ecoflow.com/products/river-pro-portable-power-station Toilet is in our removable toilet box here www.theplyguys.co.uk/product-page/toilet-box Thanks
@joerogers1885 Жыл бұрын
Where are the roof bars from? Thanks
@AnthonyWilliams-vh1ds2 жыл бұрын
Do you prefer the transit custom to other available vans at the moment? I can’t stomach the inflated prices of T5/T6’s at the moment so looking for an alternative.
@theplyguys2 жыл бұрын
its a great van, lots of room and drives really well!
@jankeydan92942 жыл бұрын
I like this set up, where do you put your bike though when it’s set up as a bed? Would it be possible to have it on the near side wheel arch?
@theplyguys2 жыл бұрын
yeah it sits on top of the near side wheel arch 'clachan' unit, we remove the front and back wheels.
@rightright6582 Жыл бұрын
What engine type? Mpg? Diesel, petrol or hybrid?
@theplyguys Жыл бұрын
Its a diesel version , unsure on mpg but in eco mode and good driving roughly 35
@gerrymccarthy528 Жыл бұрын
Great job ..what is the material you put down ?
@theplyguys Жыл бұрын
We use thermal acoustic foam you can grab it from kiravans 🤘 www.kiravans.co.uk/products/van-insulation-lining-self-adhesive-foam-with-foil-inner-surface
@musikjunx2 жыл бұрын
Where did you get the wall and roof panels from? Are they self made?
@theplyguys2 жыл бұрын
We get them from our timber supplier and design and cut them at our workshop
@poloparker12 жыл бұрын
what kind of insulation do you use for the car? so far I've only heard about "alubutyl" (against vibrations) and "armaflex" (cold/heat insulation) and for both products you almost have to take out a loan from the bank 🤬
@jamesgreen15612 жыл бұрын
By the looks of it, just the reflectix bubble wrap. The sound deadener is a must though!
@theplyguys2 жыл бұрын
Thanks for the comment! We got our insulation from Kiravans, highly recommended! www.kiravans.co.uk/collections/insulation-carpet-vinyl
@jamesgreen15612 жыл бұрын
@@theplyguys aha, is it the thermo/acoustic insulation? Tried similar from dodo but it didn't end up sticking too well on the roof of our transit. Used their other foam liner under our floor though.
@eriknew6237 Жыл бұрын
Sehr cool gemacht
@jamesbanwell45672 жыл бұрын
Looks great gents, can you tell me where you got the wall panels from as it don’t see them on your website cheers 👍
@theplyguys2 жыл бұрын
So those are our own ones but we dont sell them on the website at the moment due to how hard they are to ship. They are available as part of a full build or other furniture products and you can collect them from our shop in Glasgow too.
@jamesbanwell45672 жыл бұрын
@@theplyguys cool, thanks for the reply, is there any way to find out prices etc? You may as well advertise them as the roof & floor panels need to be collected anyway.
@theplyguys2 жыл бұрын
yeah its a tricky one as they need to be made to measure and fitted on site as every van build is different and always throws up some kind of issue or needs to be tweaked or changed while we're fitting. This is one of the reasons we don't offer them as a stand alone product on the site and more as part of a full build. It would be great if they were just plug and play, hope that makes sense!
@christianmichen94562 жыл бұрын
Richtig geil gemacht👍👍👍👍
@chrisearnshaw7865 Жыл бұрын
How big is the bed?
@theplyguys Жыл бұрын
1500mm wide and max 1900mm long
@stephane4690 Жыл бұрын
👍
@dmwi1549 Жыл бұрын
Nice results!
@theplyguys Жыл бұрын
Thank you!
@MrFinn2 жыл бұрын
looks so good!!
@theplyguys2 жыл бұрын
Thanks man, cheers for checking it out!
@adiehull2 жыл бұрын
Love it
@theplyguys2 жыл бұрын
Thanks for the comment glad you like it!!
@alphaaquisitions7062 жыл бұрын
Hi ply guys 👋 😊 thank you very much for this great video! I am about to embark on a van conversion very soooooon and soak up any information like a sponge 🧽 😂. Forgive my ignorance, but, what type of screws do you use to fasten all the wall panels to the chassis frame ? I am wondering how this works without creating unnecessary holes and keep everything securely fastened ? Are these self taping screws ? 🛠 🧰 thank you 🙏
@theplyguys2 жыл бұрын
hey! no worries happy to help, it just depends on what you have to play with, we went for 4x16 but just go with what length works for you.
@alphaaquisitions7062 жыл бұрын
oh, thank you so much for your fast reply. :) Most appreciated. I'll add this to my list of thiiings to buy ;)