Can Am X3 Warn Axon 5500lb Winch | Super ATV Bumper

[@BulletproofIndustries]

Sick!! I can’t wait to see some footage of the new rig!

[@BlownBudgetOffroad]

Christopher Borodezt we had one ride with it, not sure if you seen those vids yet!

[@UpintheAir.stream]

Going with this setup because of your video, thank you for making it.

[@BlownBudgetOffroad]

It actually doesn’t work with this bumper without modification it broke the winch i’d look at a different bumper i know the rc model bumper fits it good.

[@UpintheAir.stream]

@@BlownBudgetOffroad What? I already bought it, I was getting ready to install this week, RC model bumper? Is that a Super ATV Product?

[@UpintheAir.stream]

You are meaning the BRP RC X3 front bumper the OEM one SKU 715004788

[@joseph-greatvids.terriblew1748]

Bumper looks good looks like it belongs there.Keep up the good work.

[@craneyguy]

With your riding style I would suggest you look into some RocKnockers. The stop or block the rocks from getting stuck into the rim on the rear. A rock will get in their and grind a grove in the rim and can cut it into and you’ll need a new rim. Had mind 2 days and had both rear rims with some deep groves in them. Worth the money and save a lot of money in the end. Like the vids, keep them coming.

[@thomasdennis4834]

If you are going to tackett creek I would recommend getting lifetime trail maps. Kind of expensive but in my opinion it's worth knowing I'm not going to get lost.

[@rodneyjensen9658]

I installed a axon 4500 today so what post you put the hot wire on

[@pete1735]

You definitely bought the best warn is the best looks good can't wait to see you guys ride

[@rodneyjensen9658]

You got the cable coming through the top cable going rub on guard

[@thomascornelius510]

You could climb out of a well with that thing. Nice bro.

[@chrisreifenberger9617]

Also would like to know if this would work with a gusset kit?

[@BlownBudgetOffroad]

Chris Reifenberger I’ve been told it will, I’ll be installing a gusset kit from ct raceworks shortly

[@chrisreifenberger9617]

@@BlownBudgetOffroad thanks, that's the exact combo I'm looking at!!

[@BlownBudgetOffroad]

Chris Reifenberger it will Be a bit though before the video is out! Have a lot of content coming first from our trip to Tennessee we’re on

[@steveb1441]

19 yamaha x2 also has the factory mounting for the remote cable in glove box. I have the Axon 45. Been great so far. Steve

[@seanpeakes8739]

Torque specs for a arms etc. would be beneficial.

[@phillipmcr]

Damn looks good, hopefully it performs as good as it looks

[@pete1735]

Warn is the best

[@nickolashank8622]

I dont mean to be so offtopic but does someone know of a tool to log back into an Instagram account?? I was stupid lost my account password. I would appreciate any assistance you can offer me.

[@cadenjosiah9515]

@Nickolas Hank Instablaster ;)

[@nickolashank8622]

@Caden Josiah I really appreciate your reply. I got to the site through google and Im in the hacking process now. Seems to take a while so I will get back to you later when my account password hopefully is recovered.

[@nickolashank8622]

@Caden Josiah it did the trick and I actually got access to my account again. I am so happy:D Thank you so much, you really help me out!

[@nickelgracing9313]

Is the frame stiffener needed for winch use?

[@bigred1032]

when are yall heading to moab? we are headed there may 23.

[@adiXionRacing]

Sorry I’m a newb, but I can’t find a Warn over 4500lbs. What model is this?

[@joelemire1913]

Nice job,a little more showing on how to do it would help out alot of people watching.

[@BlownBudgetOffroad]

Yeah it’s kind of a double edge sword, want to keep people interested that don’t have the exact same machine but yet kinda show how to do it. Lol but I can understand that.

[@jonathancreech5861]

Hey guys, did you have to replace any of the a arm bolts to install bumper? I've noticed super atv includes 4 longer bolts in the hardware provided. Thanks

[@bencampbell960]

hey man if you found the answer to this let me know please

[@jonathancreech5861]

You do have to replace the 2 upper bolts. Have to jack front of machine up to take stress off of suspension, and they slide right off.

[@Hondarider35]

Get tire straps and e track to strap your sxs’s down on the trailers. Way faster and no more worries.

[@BlownBudgetOffroad]

Yeah i was looking into that but we run a few different trailers so doesn’t work out too good for that

[@rodneysessions7463]

When are you guys going to Moab? I live here in Utah, and have been to Moab many times. Let me know and maybe I can join you and show you around.

[@BlownBudgetOffroad]

Beginning of May! Message us on fb or Instagram if you have it

[@mdjak3686]

Love your videos. Sorry to bother you guys again. I know you said you had an issue and said you discuss it on the prep to going to Moab. I looked for that video, found one but didn't hear anything about the issue. I'm about to install an Axon and would like to know what the issue was and how you dealt with it. If you could provide a link to the video that would be very helpful.

[@DUNEATV]

Great video! So many peeps will probably love to know that larger winch fits. Plus you’ll definitely need a winch...😉

[@BlownBudgetOffroad]

Well yeah gotta be able to drag 2 yxz’s behind now!

[@DUNEATV]

Blown Budget Offroad LOL! Ouch!

[@Gonecheenin]

@@BlownBudgetOffroad 🤣

[@domstarkey7279]

alot doesn't do it but they make a 150amp breaker i never did till a buddy that was a Electrician was putting one on his an he ask me about it i was hell i don't know know never dose but he did an it makes since if that 10ga. wire worn threw an shorted out it burn to the ground before you could git off something to think about

[@donnieburnett2]

Ok, How did you route the cable? It’s not mounting like the book shows and I don’t see how to get the cable to route without rubbing the winch housing.

[@BlownBudgetOffroad]

Unfortunately the way we did it rubbed on the winch and created some issues. I haven’t found a good way to do it after realizing it wasn’t right a few months later. I actually routed it differently and talked about it a bit in our “Moab prep” video.

[@XCountryAdventures]

I ran into the same problem. My solution was to use the warn bulk head plate with warn winch plate then I mounted the bumper over the top. Looks like the only fab work I have to do is make up a small plate on the bottom to attach the bottom bumper to the bulk head plate. Winch now sits with rope feeding out the front of the winch instead from the top. And make sure the clutch handle is on the passenger side with rope feeding from the top of the drum. Hope this helps 👍

[@westvirginialife6901]

what is that exhaust switch for

[@jameshorton1627]

What rim and tire package r u running on this X3?

[@BlownBudgetOffroad]

In this video it’s 32” sticky roxxzillas on stock beadlocks. In our current videos it’s on Alba crusher wheels

[@azyxz8968]

OK Justin.... I'm pissed, I wanted a jippered jacket like you are sport'n in this video for Christmas and nothing available that I can see on the teespring clothing link.... What gives, I want a zippered hoodie. Let me know if they are available to us normal SXSders.

[@BlownBudgetOffroad]

My wife made the one I’m wearing lol. I can ask if she’d make one for ya. For whatever reason the company that makes our merch doesn’t do zip up hoodies. I was bummed too, trust me!

[@bryans3265]

What size drill bit did you use to drill out the rivets?

[@BlownBudgetOffroad]

BRYAN SWEARINGEN I believe around 1/4”

[@bryans3265]

Blown Budget Offroad. Good deal thanks guys. Been looking for a bumper and warn axon for the x ds turbo rr. Love the vids, keep em coming

[@BulletproofIndustries]

Where is the next place you guys are going to ride? Maybe I’ll come down and meet up with you?

[@BlownBudgetOffroad]

Where ya from?

[@robertkeime4907]

Great video

[@arickhook370]

If u do any night riding... definitely need some more lights lol

[@BlownBudgetOffroad]

Yeah for sure lol it’s on the list! Just tryin to knock out some of the more important stuff first

[@101rotarypower]

@@BlownBudgetOffroadAny interest in a VS test with that inexpensive 4wdking Amazon light bar unit people seem to like VS the next step up that may give better value for abit more.

[@Hondarider35]

Blown Budget Offroad I will send you a link later to a good light bar. It is half amber and half white light!

[@domstarkey7279]

when you got a can ham there no need for a winch there only for razors anyway

[@r23g51r]

Shouldn't strap down ur utv worng. over the tires or around arms/trailing arm lowest possible place never want to mount to the body chassis . But other then that great video

[@kylemaras]

Krrection...That's a ""female"" port to plug the handle thingy into. But it's like whatever....that'll be for a later video.....

[@tyrelthibault5264]

Machine weighs about 1600-1800 pounds why would you need a 5500 pound winch? I thought that double was more than enough?

[@BlownBudgetOffroad]

Because we ride the hardest trails out there and there’s times where we’re winching multiple rigs up a hill or rolled over machines ect where it’s a big load. Probably overkill but better then under powered when I need it.

[@tyrelthibault5264]

@@BlownBudgetOffroad do you guys ever find that the Axon 35 isn’t enough on the Turbo S

[@UpintheAir.stream]

Hey not trying to tell you how to run your channel, but you should really delete this video now that you know the product does not work with the WARN winch. I know you did not know this earlier and I appreciate you letting me know, but that is only because of my comment. It is very misleading information and not helpful, I did not want to put this stupid Super ATV winch on my rig anyways , but now I am out the money. and have to buy another option. The bumper actually broke you winch? What happened, I know you guys wheel hard, was it a fluke?

[@BlownBudgetOffroad]

It does work. Just needs modifications. The info given from buying the bumper says it doesn’t work right on it. If you don’t have the capability to customize it or fix it yourself then buy something that bolts right in and is good to go. Running the biggest winch possible is needed for us. It does fit, it does work. It broke because of how we routed the cable.

[@UpintheAir.stream]

@@BlownBudgetOffroad Ok that is what I needed to know, I am trying to figure this out. I could really fab a bumper, cnc plasma etc, just dont have the time. can you give me a call 9376052578, just wanted to see if you could tell me how to fix the bumper with cable routing and how you think the XRC will work

[@BlownBudgetOffroad]

The winch broke from how we mounted the fairlead. It stressed the case of the winch when we first installed it. Since then, we have rerouted the cable and had zero issues. It’s been in there for a year now.

[@UpintheAir.stream]

@@BlownBudgetOffroad How did you route it differently, did you flip the winch? So that the cable pays out away from the case?

[@BlownBudgetOffroad]

Hey, so I believe I talked about how it’s ran in the Moab prep video. Not home and can’t look now, there’s been so many videos hard to remember exactly. But I believe it was right before we went to Moab when I had the issues.