Can STAMPS Imprint on EPOXY RESIN?

  Рет қаралды 12,080

JBKonsCreations

JBKonsCreations

Күн бұрын

Пікірлер: 60
@jayelleart
@jayelleart Жыл бұрын
Maybe a way for you to make an inlay from the stamp… stamp them into clay. Once it’s hardened or backed you can pour silicone in there and presto, you have an inlay. I love the van! ❤️
@JBKonsCreations
@JBKonsCreations Жыл бұрын
Ooo thats a great idea! I’ll definitely try that! Thank-you.
@jayelleart
@jayelleart Жыл бұрын
@@JBKonsCreations you’re welcome. :)
@editek5992
@editek5992 10 ай бұрын
@@JBKonsCreations Make sure the clay is sulfur free...and if you wish for the inlay to be shiny you can pass a torch over the clay imprint before pouring the silicone.
@chanalowenthal3897
@chanalowenthal3897 Жыл бұрын
Maybe spray with silicone release spray. Or- stamp the images on clear acetate with waterproof ink. Then color in with markers. Like a p.e.t. Sticker.
@JBKonsCreations
@JBKonsCreations Жыл бұрын
I don’t have any silicone release spray unfortunately but I’m definitely going to get some and try it.
@diannacruz1969
@diannacruz1969 Жыл бұрын
That’s what I was thinking, good idea, abit of mold release…
@pikeandike
@pikeandike Жыл бұрын
Your video says you waited 48 hours before you tried to take out the stamps. I think if you try after 12 hours it will be easier to peel them out. Even if your tray is a bit soft, you can just lay it down and let it cure out of the mold. I think these turned out great! 🇨🇦
@mavanie
@mavanie 7 ай бұрын
I tried this around the same time you aired this video. Before applying more resin for topcoat, I poured silicone rubber into the stamp indentation.....got lovely inlay to replace the warped stamp, So after 1st attempt made more in old mold just for the purpose of making inlays. Worked really well. I'd seen another y tuber do it so figured I'd give it a try.
@MaxinesCraftynStuff
@MaxinesCraftynStuff Жыл бұрын
That piece with the bus is 🔥
@julianasheridan2525
@julianasheridan2525 Жыл бұрын
I've stamped on to resin when is halfway cured. It's worked out quite well. I've used different color stamp pads. The cover with another layer of resin later.
@AzulMariecreations
@AzulMariecreations Жыл бұрын
I think they both look so cool
@jleaclark
@jleaclark Жыл бұрын
Thank you for trying this! And for the Mason jar mold! I was looking at stamps last night wondering.
@Kreative_Rainbow
@Kreative_Rainbow Жыл бұрын
They turned out really lovely!! 🥰 Great design idea!! 💖
@JBKonsCreations
@JBKonsCreations Жыл бұрын
Thank-you, it was fun!
@Kreative_Rainbow
@Kreative_Rainbow Жыл бұрын
@@JBKonsCreations I'm glad you had fun with it!! ❤️ That is important when making art!! 🤗
@lindasartsystudio
@lindasartsystudio Жыл бұрын
Hello! I have tried that technique and I really understand what you mean about the difficulty of getting them out.😅☺ I also think that you can make one in resin, and then make your own silicone inlay from them. 😇thanks for showing us what you've done. they turned out super nice🥰😇
@justtere
@justtere 6 ай бұрын
These are gorgeous.
@miniscenesgb
@miniscenesgb Жыл бұрын
Lovely results. Great work
@mookzmom
@mookzmom Жыл бұрын
Great saves, but sorry to hear of the ripped stamps. I wonder if mold release before applying mica would be a good idea. They do look so cute!
@AnnasCreations-rz7ye
@AnnasCreations-rz7ye Жыл бұрын
Wow.. those turned out so good 😀
@Enjoythepour
@Enjoythepour Жыл бұрын
These are so cool. I love them. I just wish they was an easier solution.
@JBKonsCreations
@JBKonsCreations Жыл бұрын
We must find an easier way!😊
@Becky_lou_smuling
@Becky_lou_smuling Жыл бұрын
Wow so beautiful love the vw van stamp and the the jar is amazing too x
@livingbylove
@livingbylove Жыл бұрын
People use “droozy inlays” in the same way, maybe you can find a video on those that will tell you how to keep the stamps from sticking and tearing. I absolutely loved the way these turned out!! You did great!!
@mayanderson9664
@mayanderson9664 Жыл бұрын
That was awesome
@looseskullsscrafts
@looseskullsscrafts Жыл бұрын
Those came out awesome - great video, thank you for sharing : )
@s.714
@s.714 Жыл бұрын
Loved the idea of using clear stamps as inlays. I bet you could spray them with mold release when you use them again?
@farialmab4723
@farialmab4723 Жыл бұрын
There are several videos out there showing how to use this with Less Likelihood of tearing the stamps, (which is such a shame to tear). Also you can *100%* make silicone inlay/insert from the hollow imprint in your resin pieces, (before topcoat is applied)!
@olgacolonforeversky
@olgacolonforeversky Жыл бұрын
Pretty
@libbyannbest1723
@libbyannbest1723 Жыл бұрын
Try the stamps with plaster or resincrete or jesmonite.
@maxkalexander5991
@maxkalexander5991 Жыл бұрын
You could try mold release before rubbing on the mica. So that way the mica still sticks to the resin.l
@karenmclaughlan9128
@karenmclaughlan9128 8 ай бұрын
Those look awesome! Did you place the stamp color side up or color side down xx
@tattstitancouple
@tattstitancouple Жыл бұрын
very pretty! why dont you use the stamps to make a mold inlay that way the stamps dont get damaged and they might be easier to get out of the resin. just a thought 😊
@JBKonsCreations
@JBKonsCreations Жыл бұрын
YESS! Someone else suggested the same idea! I'll definitely have to try it. I do have some silicone to use up...🤔 :)
@fallendroplet
@fallendroplet Жыл бұрын
How about leaving the stamps in the mold? I liked how they looked before you removed the stamps. If the stamps don't work a second time, I suggest leaving them. Just dome over them. ❤
@JBKonsCreations
@JBKonsCreations Жыл бұрын
Thats an interesting idea, I hadnt thought of that. 🤔 Might as well keep them in lol thankyou!
@judyeuller7602
@judyeuller7602 Жыл бұрын
I stamped the image onto the mold without leaving the stamp in place. It worked. However, that wouldn't work if youre wanting to leave an impression.
@melaniereisner8375
@melaniereisner8375 Жыл бұрын
I saw another person do that. It also worked when she put mica directly on the silicone mould. I was really surprised it worked. The resin picked up all the colour!
@candymatek3
@candymatek3 Жыл бұрын
Might need to fill in the stamp voids after removing them to protect the image.
@craftygrams3223
@craftygrams3223 Жыл бұрын
So so cool! I have tons of stamps that I'd like to try. I'm wondering if you could stamp on the mica powder on a cured resin piece?
@kimjefferson3425
@kimjefferson3425 9 ай бұрын
That turned out super cool! But I have never heard of resent stamps, what are they actually intended for?
@JBKonsCreations
@JBKonsCreations 9 ай бұрын
they're stamps for paper. :)
@Babs-Veterans-are-Family
@Babs-Veterans-are-Family Жыл бұрын
As a card maker I cringed when I seen the stamps. I seen a cool technique where a gal demolded a piece before it was solid. Wonder if you could stamp while the resins pliable? Use a clear resin block for a stamp block.
@SuzetteKath
@SuzetteKath Жыл бұрын
I'm wondering what would have happened if you had applied mold release before doing the mica on the stamps?
@ajnormandgroome
@ajnormandgroome Жыл бұрын
I tried stamps with less detail and it was a little easier to remove
@CoobabyCreations
@CoobabyCreations Жыл бұрын
So pretty. You can use tacky glue on the stamps, to avoid the struggle 🙃
@JBKonsCreations
@JBKonsCreations Жыл бұрын
Thankyou. Ill remember that for the next time!👍🏻
@TheBriarPatch
@TheBriarPatch Жыл бұрын
Why not use a bit of clear school glue to mount the stamps in the mold? To remove the stamp from the mold, soak it in water.
@kimclayton5814
@kimclayton5814 Жыл бұрын
Mould release?
@justiceblackwolf369
@justiceblackwolf369 Жыл бұрын
can probably make silicone molds outta the stamps
@bobbysmith8095
@bobbysmith8095 Жыл бұрын
Yeah I saw someone did this and it was too much work IMO. (and too much money over time) I would just use a sticker or circut an image if I really want a certain design.
@JBKonsCreations
@JBKonsCreations Жыл бұрын
Oh yeah I bet it can get expensive. These “kits” I have here are around $20 at Micheals…Im so glad I got these for free. I doubt I’ll buy any stamps for this tho..unless I can find a way to make it easier to remove the stamps lol
@sandangels73
@sandangels73 Жыл бұрын
I would recommend not using the food containers for food after covering the resin with them due to chemicals leaching into the plastic.
@JBKonsCreations
@JBKonsCreations Жыл бұрын
I ONLY use these to cover my resin pieces. :)
@RinasAMaker
@RinasAMaker Жыл бұрын
I wonder if you would have better luck with poly stamps, rather than silicone stamps. 🤷🏼‍♀️
@kathybray7156
@kathybray7156 Жыл бұрын
Cool❤😂
@The_Lazy_Crafter
@The_Lazy_Crafter 11 ай бұрын
Babe, make moulds so you can use them over and over ❤
@JBKonsCreations
@JBKonsCreations 11 ай бұрын
Ive been looking into it…😆
@jennifervance6330
@jennifervance6330 Жыл бұрын
Next time try putting wax on the stamps first. It will make it easy to remove and avoid ripping your stamps.
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18
Когда отец одевает ребёнка @JaySharon
00:16
История одного вокалиста
Рет қаралды 16 МЛН
ЗНАЛИ? ТОЛЬКО ОАЭ 🤫
00:13
Сам себе сушист
Рет қаралды 3,6 МЛН
A Resin Experiment: Can you use Stamps and Embossing Powder in Resin?
11:54
Steve McDonald Arts and Crafts
Рет қаралды 26 М.
This Brand New RISKY technique will elevate your work  A MUST TRY !!
25:12
Claire’s Crafty Corner
Рет қаралды 29 М.
Llama Fabric Coasters, Fabric Set in Epoxy Resin
10:52
Creation Studio with LaLita
Рет қаралды 11 М.
An Experiment to See If You Can use STAMPS in Resin
9:37
Steve McDonald Arts and Crafts
Рет қаралды 33 М.
#186. 'ONE GIANT LEAP' For RESIN ART! An EPIC DISCOVERY!
17:31
Daniel Cooper
Рет қаралды 167 М.
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18