Can This Rusty Tonka Truck Be Turned Into a Tricked Out Low Rider?

[@superboats2]

"Pimp my Tonka truck", LOL Now, I've seen everything. Nice work.

[@thomasgilbreath7401]

Beautiful work

[@cricketwireless7409]

Million dollar restoration. Super awesome! Thanks

[@xSpecterx99999999]

Thank you very much!

[@paxhumana2015]

@@xSpecterx99999999 , I think that this truck was based upon the 1960-1966 GMC step side pickup trucks, am I right?

[@mikeparr2648]

​@@paxhumana2015❤❤❤😅❤😅😅you

[@jerrylitchfield4111]

Very nice job buddy, 2 thumbs way up. Looking forward to checking out your channel.

[@joesantiso6495]

Excellent job

[@leslietarkin]

That's a smokin' hot low rider! Great job.

[@xSpecterx99999999]

Thanks 👍

[@cricketwireless7409]

Nicest restoration I have seen. Just awesome! Thanks for your effort...

[@franciscoorta5283]

Excelente expectacular . trabajo!!! Venezuela

[@williamwoods8182]

This is soo relaxing. Sanding is the best feature.

[@coryheckler2354]

I know this is an older vid....but like always...you killed it! As good as Fantom Works or Bitchen Rides! Sweet! 👍

[@guntherjanssengerdes2479]

Great Job!!!!

[@axeldominguez9551]

I didn't see that commimg, u the man!!! Excellent work

[@xSpecterx99999999]

I appreciate that

[@markfrench8892]

Why is the song "Low Rider" going through my head? 😂

[@eljr4732]

Trokiando cuh 😎 new subscriber

[@charitybrown4274]

Awesome job!! That look great!!

[@joallawestervelt6918]

Wow! That is fabulous. The color is incredible. Love it. Awesome job. Way to go! ♥😺♥

[@xSpecterx99999999]

Thank you so much 😀

[@chha6439]

Great job 👏

[@CoolRestorations]

How in the World does this not have more views! Really nice work!

[@xSpecterx99999999]

I wish I knew. Thanks for the great feedback though, greatly appreciated!

[@gaslandsmechanic4978]

@@xSpecterx99999999 It is most likely the thumbnail. Makes it look like one of those fake restorations.

[@roxs81]

​@@xSpecterx99999999 Merely watch rescue and restore note how he promptly presents his extensive restoration.

[@joshbarrett2980]

I am surprised it has as many views as it does. Chip Channel Restorations worst restoration is 10x better than your best.

[@bennycolburn1341]

Pretty cool

[@RestorationAustralia]

Nice modification great filming.

[@chrismayer3919]

Los Barrio of old South Tucson would approve!

[@xSpecterx99999999]

I had to look that up, but yeah, I would definitely agree!

[@sjvche7675]

Cool using a smoker to cure your powder coat.

[@BMWiE-lz3nu]

Would'a been sweet if u did a wooden bed..

[@allyoucando8486]

Even West Coast Custom will be shock to see this, a toy anyone will fight to have, se ve bien perro

[@victorpaulportelli3872]

If you done front lights you should have done brake lights. In saying that, I love your work.

[@xSpecterx99999999]

I wanted to but couldn't find ones that would look enough like real truck brake lights.

[@nelsonbottijunior6664]

Campeão. Cuidado com detalhes. Excelente.

[@mantismodels1207]

"It was just aight for Me dawg"... Randy Jackson-

[@regwin8955]

Ja cool 🤓🐾😎👋

[@scottfortune9016]

I kind of like the modification. But I don't like the scribble in the steel under the paint

[@ajkoots258]

FANTASTIC

[@АнатолийАнатолий-ъ8ф]

Сверлить , пилить открашенную деталь - гениально

[@byrontaylor9235]

AWESOME this truck turned out very cool and it's in one of my fav colors it's my top fav which is blue and it's my 2nd fav shade of blue my 1rst is illusion blue. The lights and the hubs were very cool additions. A very cool first vid of yours I've seen and it was cool and of course I subed

[@xSpecterx99999999]

Right on!

[@johnzeller1338]

I love the results! Spinner hubs! What a great idea. What I don't understand are 55👎. You've got to be kidding. I mine like come on!! Just subscribed to your channel and going to watch more of your work. Have a great Thanksgiving to you and yours.

[@xSpecterx99999999]

Really glad you enjoyed it. I think people are down voting it because it is not a exact restoration. I laugh when I see all the down votes. It makes me think someone was upset by my modifications. =) But most people like it.

[@ar_restoration]

Awesome!

[@xSpecterx99999999]

Thanks!

[@smiles4miles208]

Awesome ☠️🔥🔥🔥

[@raymon3206]

The part that i like when you use the frankenstain hand # sand blasting 😄

[@xSpecterx99999999]

LOL! It does look like that.

[@bob-fy5xl]

The pieces that he put in the machine did they remove or paint

[@macseagle5968]

The turning point for me is the sandblasting part.

[@xSpecterx99999999]

Too dark and too dusty? I added light strips to the inside and changed out the dust collector with a shop vac. It is definitely better now but not perfect. I have a direct pressure blasting cabinet, those are more powerful than the syphon type but so dusty.

[@timwegman5776]

Sick I just did near the same but no powder coat, spinners and no chop top but I lowered , added head and tail lights and made a nice patina looking paint job it's sick as well

[@Rockyandhislolmoose]

i loved what you did and I am in the middle of restoring 5 different trucks right now. These are my toys from 1963, I played with them and so did many other kids over the years. Seeing your restoration on this truck is leading me a whole different way on the pickup I just started. I bet the top is lower and it is slammed too. All that said I have two questions. Why not cut the front cab supports to lock down and also it looked like you didn't powder coat on the roof when you finished chopping it. Did I miss that?

[@xSpecterx99999999]

I should have cut it so it locked in, actually never crossed my mind. I powder coated it before chopping it. I really should have chopped before powder coating. that was a mistake. Glad you enjoyed the video. Good luck with you builds!

[@Rockyandhislolmoose]

@@xSpecterx99999999 I have been inspired though. I have my 63 stepside in gloss black drying as I write this. I'll have to do something a little different with the hubcaps since I don't have the means to cut custom ones. When I get it finished I'd like to share it with you. If that's ok?

[@xSpecterx99999999]

@@Rockyandhislolmoose definitely. I would like to see how it turns out. I will make an email account for KZbin and pay it in this reply

[@Rockyandhislolmoose]

@@xSpecterx99999999 Okay, I just finished the project and would like to send you the results. Have you created a way for me to email them to you?

[@Rockyandhislolmoose]

Sorry, I got side tracked and was not able to send the pics to you. It looks like you had to remove you email address. Let me see if I can post them on instagram that way you want have to post an email address again.

[@rogeriosartori555]

Amazing! Better than watching Overhaulin'!

[@jamesa.7604]

You do incredible work! Compliments on your skill and ability and patience!

[@xSpecterx99999999]

Thank you so much 😀

[@barryhopesgthope686]

May t fine!

[@ussdiscovery6912]

That thing is Sick! Bad Ass!!! Awesome transformation! Well Done Mate!

[@nelsonmendoza2258]

Amzing

[@TheOficialShortKing]

You could have done a 5 spoke wheel instead of those ugly 4 spoke spinners man lol other than that. Sick work!

[@xSpecterx99999999]

Damn, now you tell me. That would look better. The 4 spoke are a little chunky.

[@TheOficialShortKing]

Looks good though man. But yeah that 5 spoke woulda been killer

[@customwheelsdiecast]

two completly different cultures combined together

[@stephenhorsley668]

Dope!

[@jerryhulshoff4151]

Nice work !! Where did you get the "diamond plate"

[@xSpecterx99999999]

You can find it on eBay. There is a seller that has them precut to fit tonkas.

[@irishn8]

Nice work. I can tell you put acid on it to make it look worse though.

[@larannar123]

This is just awesome!! I subbed for doing something different!!!!💯💯🤘🤘🤘

[@xSpecterx99999999]

THANKS! I am wanting to do something different from the rest in all my videos. Funny thing is some people don't like that. This is may lowest rated video and most liked at the same time. LOL.

[@larannar123]

@@xSpecterx99999999 Well,I watch at least 10 restore channels, all from Tysy,Verdona,Random Hands,etc..,there is plenty of channels doing purist restoration... I personally appreciate your remods, I mean how many Yellow Tonkas have to be done,before you can step outside the box..😎

[@xSpecterx99999999]

LOL, that's exactly how I feel.

[@k33elly]

What did you do to the paint on the doors? It doesn't look like its scratched for any reason.

[@xSpecterx99999999]

I used a clear powder coat so you can see through to the metal underneath. If you watch almost all the way at the end you can see the scratches from certain angles. It makes it a pretty cool effect.

[@k33elly]

@@xSpecterx99999999 I definitely like the idea of what you're talking about, but it looks a bit disorganized and sloppy. If it was done in an intentional pattern, it could look really cool, though.

[@xSpecterx99999999]

@@k33elly agreed. I rushed it. Didn't know if it would turn out.

[@annikadson]

Great to see something new and your creativity. It was nicely done. Lacks lamps and other inventive things in the others who are making cars nice. Very fun video. Hugs from Gothenburg in Sweden.

[@xSpecterx99999999]

Thank you very much!

[@charles-y2z6c]

When i first looked at it i said "No frigging way"

[@woodymurphy4522]

I know you put a lot of effort into this and no offense is intended. I just don't like the end result. The diamond plate bed cover however was a stroke of genius and improved the looks. I would have went for a wooden bed but that's just me. Regardless I'm still going to sub.

[@macseagle5968]

Your name backs up your comment.

[@Judoecucina]

Very well done! Greetings from Rome. MariaLuisa

[@xSpecterx99999999]

Thank you very much!

[@karlpatterson8437]

Love your work and been watching your vids for awhile now, but if we are going to have three long ads at a time, I am done with it.

[@justinmcclanahan4745]

To bad that you can't fit wider tires on the back with deep dish wheels & skinny ones up front & also ghost flameson it also,that would've looked badass 😎, but nice restoration

[@jnice1630]

Why does he scare me looks like he should work for horror films but still admire your work

[@zainuddinhashim14]

👍👍👍⭐⭐⭐⭐⭐💖💖💖

[@jnice1630]

Can i send you one for you to restore for me? How much do you charge

[@xSpecterx99999999]

Sorry. I don't do custom work.

[@stoveboltlvr3798]

Love what you did especially seeing what it looked like before. Just wondering why you didn't make mods before painting/powder coating?

[@xSpecterx99999999]

I forgot to cut down the cab of the truck earlier. It was an "oh crap" moment and i went ahead and cut it down anyways.

[@DonaldMelton]

i think it's time for some new sandblasting gloves . those things looks like they have leprosy or something on them .

[@xSpecterx99999999]

And there is tape holding them together you can't see on the video. Someone else said they look like Frankenstein hands. They are pretty comfortable though. =)

[@minenotyours74]

why does everyone who I see doing this wear rubber gloves for the entire process? I understand if painting, or if it was toxic, but why always with the gloves?

[@patrickdejong723]

To keep your piece clean. Fingers leave grease and fat on your piece so it saves times not to be wiping that off all the time

[@minenotyours74]

@@patrickdejong723 Ok, I just couldn't figure that out, Thanks

[@diamondzintheruf9883]

To call this video impressive is putting it mildly! Wow!

[@recantodossonhos3744]

Top