Can You Use Godox Flash with Non Godox Lighting Equipment

[@diamondshark11]

The most crucial step here that I'm really glad you covered was that a speedlight needs to be set into TTL mode to be controlled by the X1R-N; even if the Xpro or transmitter is set to manual, the speedlight still needs to be set to TTL. The Godox manual doesn't cover this anywhere I could find, so bravo for including it!

[@harrygilliland5675]

The X1R receiver can also be used to trigger your camera remotely.

[@ipadista]

As long as there isnt too much ambient light, like indoors or studio, and no other flashes are used that risk triggering things. Quite often using visual slave mode is the least hassle, and you're not losing more than the ability to remotely adjust the lights. If I need an all radio setup with Godox as the main kit, I would put an X1 trigger on the camera and the other brands trigger on top of it, and then normally I would control my Godox lights via an X-Pro trigger that I carry. In a squeeze, you can do the settings on the X1, but if I can avoid it I would.

[@1dgram]

You can put your Yongnuo transmitter on top of your r2t and get ttl and high speed sync functionality (at least with Canon) but the gotcha is that the Yongnuo lights all have to share group A and shoot at the same power level.

[@KaReEdCa]

Interesting. I'm thinking of using my yongnuo 622c on top of a x2tc to trigger other smaller flashes... I'm planning on getting the AD200.

[@andreaspetershtc]

Godox and Yongnuo Flash System combined: After some testing I found a perfectly working solution to trigger my Godox flashes (by the Godox XPro-S flash controller) in combination with my Yongnuo flashes (indirectly triggered by the Yongnuo 560TX flash controller connected to my Godox X1R-S receiver). Remark: Of course the Yongnuo flashes will still be manual only but I can easily change the settings (like flash power and zoom) wireless by the Yongnuo 560TX controller and use them as additional flashes in a studio setup.

[@redbudgieuk]

I use a similar setup. 560TX on an X1 receiver. Works well and as they say, if it isn't broke don't fix it. Ideally I want to replace the Yongnuo's with a V1 and a second AD200. Ideal for outdoor work.

[@marcinwilczynski1457]

Thanks a million, Robert! Tried to make working trigger and transmitter for half day. Fired out but couldn't control the power. Didn't know that sb-600 has to be in ttl. Works perfectly now. Cheers again!

[@stanleyipkuss]

Hey thank you so much for this info! I was sold a Photix Mitros+ & a Godox XPro TTL Flash Trigger in a bundle from a store called Mike's Camera in Dublin California. The sales person assured me that the two were compatible with each other. After months of trying, troubleshooting & researching I finally came across this video. Stores will hire anyone, it's sad how sales-focused things are.

[@robhallphoto]

yeah you got lied to lol.

[@stanleyipkuss]

What a bummer! 😭 Literally your video helped me solve this, thank you so much! Subbed! 👍

[@stanleyipkuss]

@@robhallphoto Hey, so is there a typo in your video @1:34? 🤔 You say "Godox X1R Receiver", however in text it says "Godox X2T Flashpoint R2T". Today I purchased the Godox X2T because of seeing that in this video. Also the merchant I purchased it from had informed me that this product works as both a transmitter & a receiver. However it is still not functioning like how I would want it. I have a Phottix Mitros+ & a Godox XPro Flash Trigger for my Canon camera; I want to fire the Phottix using my Godox XPro Flash Trigger. What do I do?? I watched your video a bunch but I just want to make sure I am understanding it correctly before I purchase the "Godox X1R Receiver" you recommended in this video. Please help clarify, thanks.

[@robhallphoto]

@@stanleyipkuss Sorry, yes that is a typo. Godox X1R is the receiver. But, I would return/sell the Phottix Mitros since they were misinformed about what they sold you and put the money towards a Godox flash. Or, sell/return the Godox Xpro and get the transmitter for a Mitros. It makes no sense to buy a Godox receiver to bridge these two incompatible units, when you could get a Phottix trigger, or Godox Flash, and not have to deal with a receiver at all.

[@stanleyipkuss]

@@robhallphoto All this makes perfect sense, thank you so much for your thoughtful response! Last question I promise 😂 (you are the only person I chatted with who knows what they are talking about), which Godox Flash would you recommend? 👀 Thank you again, soo much!

[@ateliercunha2876]

Hi, is there a Godox wireless flash trigger solution to fire in manual mode only (enough for me) a Canon Speedlight 600EX-RT with a Fujifilm GFX50R camera? Thank you very much.

[@garyholda8671]

You can also use the hot shoe on the X1R with Vello transmitter and receiver for non GODEX flashes.

[@jimwlouavl]

Can I control a Vivitar 283 with an X1-RN? I have the manual controller for the 283 and would use it for a background light. Do I need to worry about the flash’s voltage frying the x1-r?

[@jerrym2321]

Exactly what I needed to know. Thanks for the clear explanation.

[@Mariosch26]

I'm not 100% certain, but I think the X1R is only available for Canon, Nikon and Sony - no Fuji or Olympus versions (on the Godox Website, Canon, Nikon and Sony are listed as X1-C/-N/-S wireless flash triggers, while Fuji and Olympus are specifically listed as X1T-O and X1T-F wireless flash triggers) All X1R should work at least in manual mode with Fuji or Olympus-flavored X-series triggers though, so one should be at least able to use them as single pin triggers for Fuji or Olympus speedlights.

[@bobcohen8248]

If I read the doc correctly, the V860IIS can control Sony flashes directly via their intelligent optical wireless system (WL). It can also be controlled by them. I don't think there's HSS, but there is TTL. Here's the relevant paragraph: This product is compatible with Sony Wireless Lighting System (WL). It can function as either an optical wireless master or slave flash. As a master unit, it can control Sony camera flashes e.g. HVL-F60M, HVL-F43M and HVL-F32M via wireless. As a slave unit, it can be controlled by wireless signals of Sony camera flashes e.g. HVL-F60M, HVL-F43M and HVL-F32M.

[@brucekraft744]

I have a couple of X1R's for Nikon. They work great, and I'm still using my beloved SB800's and SB910's. Pretty cost-effective, too. The X1R's also work TTL with my Fuji and Pentax cameras. The 800 and 910 also work in HS mode with Fuji (I couldn't check w/my Pentax.)

[@daynepillow]

Hey Bruce. I just got a X1R to go with my SB800. But can't seem to change the power with the X2T. Are you able to fully control the SB800?

[@brucekraft744]

@@daynepillow With my flash (either SB800 or SB910) set to TTL and mounted on the X1R, I can adjust the flash output from the XProF trigger with good accuracy. I realize now that I should have stated that I was shooting with manual control mode on the trigger. I almost always use manual mode for flash. I just tried both flashes using TTL mode on the trigger, and that did not work accurately. I also tried HS in manual mode, and that worked well, though at reduced power of course. Best wishes!

[@daynepillow]

​@@brucekraft744 Thanks for the reply. This all makes sense to me, that's also what my setting are - manual on the trigger and TTL on the flash. But I still can't adjust the power. I am wondering if for some reason, the X2T cannot talk to the X1R correctly when mounted to that flash and maybe I need to exchange the X2 for the XPro? Even though that doesn't quite make sense to me. Thanks again.

[@brucekraft744]

@@daynepillow That IS baffling. I find it hard to believe the X2T is the problem. The Nikon flashes have 2 TTL settings: regular TTL and TTL/BL (some sort of balanced lighting function that I've only ever used for outdoors fill-flash during daytime with my Nikon). I have never tried the TTL/BL setting as it just doesn't seem appropriate for this application. The only other suggestion I can offer is to make sure your flashes are fully inserted into the hot shoe of each X1R. I have 3 SB800's and 2 SB910's each on it's own X1R. Never had a problem with any of those lights. Best of luck! PS: I just tried a Flashpoint R2T-F (Adorama's equivalent to your trigger) with an SB800. Worked fine for exposures at 3 different levels. -BK

[@daynepillow]

@@brucekraft744 Thanks again for the input. I got an XPro to see if it was the trigger and it was! I hooked up the XPro, SB800 and the same receiver and everything worked without issue. The X2T I got must have be defective in someway. I will be sending it back and hanging onto the xPro. Thanks again.

[@mikezupancic2182]

Great description of how things can work, even with the limited resource of pictures.

[@NadzCB]

Glad to have found this channel man great work

[@gordonguffey1280]

Real question~I have a yongnuo YNE3-RX that has a top hot shoes were I have use other tiggers like the yongnuo yn-e3-rt and altura trigger to control all all my speed lights and it works~I'm wanting to pair it with a Godox X1R TTL Wireless Flash Trigger Receiver~Can the Godox work the same way~I wish to add a AD 200 but don't want to waste my flashes I already have~Its not like I do this for a living~ Thanks if you can qhelp on not~ Gordon

[@kerric.bordetokeeffe5842]

This is so helpful. I was wondering why I couldn't get my SB-700 and XT32N to communicate.

[@roncemine4948]

nice info.. can Nikon SB-800 compatible for X2T-N ?

[@abbyleyva2211]

Thanks for the info. I like the godox system. I have an R2PRO(O) on my Panasonic camera. and love that I can use my V1(N) flashes. I was thinking of getting another one of those and I think that if I find one cheap for any system, they will all work. But I also have an old Canon 580EXII that I don't use. and other older canon flashes. I'm wondering if I should give them some life to throw into the mix with a transmitter. Or should I just get another V1 on sale. If I was to get a canon transmitter for the Godox system, would I get ttl if I ever need it?

[@howardwinkler3997]

I am using two Godox V1n flash units. They are both sitting on light stands about three feet apart. Neither one is attached to the camera in any way, One V1 unit is set to MASTER, the other is set to SLAVE. When I test the setup by pushing the flash (Green) button, the Master and the Slave both fire. In use, the Master is fired by a connection into the 2.5mm jack with the other end of the cable set into a MIOPS+ trigger - the trigger fires the MASTER but the SLAVE does not fire.

[@jwojo826]

Adorama Support is first class! I have a full arsenal of Flashpoint lights never had an issue when I had to contact them.

[@udinnzain3669]

Sorry, I asked a question maybe a bit silly. I have an old camera flashlight (1980s camera flash), can I just plug it in on Godox X1T only, then I use a smartphone to trigger the flashlight.

[@chuckdevlin6143]

I will be purchasing two tt685 units plus a x-pro trigger. Currently have an Altura ap-n1001 speed light which I expect to use with the Godox setup by putting the altura speedlight into S1 mode - thus having another flash set it off. Obviously will have to set it up completely manually as the x-pro trigger will not know that it exists. This should work as I tested using an on-camera flash to set it off. This should give me a three light setup for portrait use, plus save me some money and let me still use my existing speedlight. Any issues with this please let me know.

[@radekwilk1173]

Hi Robert, I have an XproN-trigger and an X1RN receiver and I want to use it to trigger Nikon SB-700 in manual mode. Is the a way to change flash setting without touching the flash? It also look out of synk at the moment.

[@gazikhaled5423]

Can I channel AD100 and Sb910 nikon flash at same time by applying this process ?

[@jannieschluter9670]

Another question. I have a Godox X1T-O. Can I operate an offshoe Godox flash with the transmitter that is made for Nikon? Would TTL and HSS of the Godox-Nikon flash work perfectly with my Olympus camera?

[@soundofthegardenwatc]

i really dont see replies to others on the comments. well i guess i will give this a shot. i have a YN568EX II and wanted to know if i just need the godox receiver and transmitter to use HHS and ettl, ttl

[@robertvandenbos6680]

Hi Robert, my name is Robert too. I have an XproN-trigger and an X1RN receiver and I want them to get to work with a Yongnuo YN565EX speedlite. No I quite understand how to set both the transmitter as well as the receiver. However, I am not quite sure about what the settings on my speedlite should be. For instance, this type of speedlite supports TTL but when I hook it up to the Godox equipment and I change the settings on the transmitter from TTL to M, nothing actually happens on the speedlite. (It flashes but it does not change from TTL to M) Could you please help me out? Thanks a lot and greetings from Holland.

[@silvere36]

Thanks. I have a Yongnuo 685 and I can't get it to work properly with the X1R. It won't adjust power and sometimes won't even fire. Do you know why? I'm using X1T commander.

[@TomalBhattacharjee]

I hav 5Dmk4 with XProC.. I hav a Nikon SB600 along with X1R N. Though I'm able to fire d Nikon flash, I'm unable to control d flash output from d XPro. I tried d technique of using TTL on d flash and manally adjusting the power from d XPro C. Any solution ?

[@Prophotographyuk]

Would godox X1 trigger work with Andoer Ad 980ii ittl?

[@mykkwento9030]

I am new to flash photography, just wondering if I can use both the godox V860II and ad200 at the same time? either I have a wireless trigger on top of my camera or I have the v860II that will trigger the ad200? Thanks

[@edmunddworakowski7499]

I am going to try controlling my Nikon SB 800 speed lights while using my 200 and 600 strobes with PW Flex 5 receivers while controlling them with Mini Tl transmitters mounted on the hot shoe of my Godox Transmitter. Exposure will be controlled wit my Seconik L 478 DU meter which will also fire all lights.Speed light level will be controlled with a PW SC3 controller all stack mounted on the Godox Transmitter hot shoe... I haven’t tried it yet, but I don’t think there will be any problems... @ny Opinions ?

[@i18nGuy]

I dont get why the X1T for Nikon says it supports CLSand iTTL if it doesnt control Nikon Speedlights.... I have several Speedlights and and AD400. I would be happy if I could put a speedlight in the hotshoe of the X1T and have the speed light work as a master for other speedlights using Nikon's CLS while the X1T controls the AD400. (Without purchasing receivers). Will that work? Please and thanks.

[@rosyandstevetellitlikewese2517]

Hello, I have a Nikon Speedlight SB-900 flash. Recently I have switched from Nikon Cameras to Sony Mirrorless. I purchased a 6600 and an A7RIV. What tigger will work for me using the Sony Cameras with the Nikon Speedlight SB-900. Thanks

[@RobertoCienfuegos]

Thanks for your videos Robert. I had been looking for a cart like the wagons but made for us with space to put the light stands with the 600 Godox and the softboxes with space for the cámara bag. Let me know if you seen a good one. I have one but I tie on the side the light stands with bungee cords and set up on location. After each stop the way you move it changes. I heard there is a cart that you can put the light stands underneath with space that goes perfect with the 600 Godox. It would be nice that Adorama would make a ideal cart for us at a fair cost. Thanks for your videos.

[@danielforero1]

Is it possible to trigger and control independently Hensel Integra lights with this Godox trigger? Thanks!

[@robhallphoto]

No experience with Hensel integra, but if they have a sync port and not a shoe, chances are there will be no remote control of them using Godox radio gear.

[@robertjackson7284]

Thanks for this info. I’ve started seriously researching ways to still use my Nikon SB900s & SB910s with full capabilities since I’m looking to jump into Godox strobes with the AD 200 Pro. Working on a tight budget so the X1R-Ns will be a great way to combine existing equipment

[@rosyandstevetellitlikewese2517]

Are you using Nikon Cameras?

[@RBespoir]

I connected the Nikon SB800 & SB900 in TTL mode, using the Godox X1R. It did not work until I set the ID to OFF on the Godox X2T transmitter. Then it all worked and I am able to adjust the Nikon speedlights from the X2T transmitter.

[@diulio.fotografia]

Amazing video! Thanks for the explanation! I really hope godox would make some receiver to bridge the Canon RT system with Godox X system... Anyway, I just have one question left... What is the XTR-16S for? I mean, I have a TT685C that already has radio (master and slave) but it has a wireless port to connect a XTR-16S. What's the diference between connecting my X2T with the TT685C through it's intern radio or using the XTR-16S??

[@dramsphoto]

Question . Will the godox x2t godox ratio slave trigger a profoto studio light that has a built in receiver. My last slave did but the hot shoe broke off and am wanting to replace it

[@robhallphoto]

No.

[@Firebrand911]

I'm interested knowing how limited the integration of 2 Nikon SB-700s and a Nikon SB-900, with a group of 2 Godox 400 Pros & a Godox 600 Pro would be. (This would be a complex 6 light setup, using the Nikons for lower point to create atmosphere with gels -- probably could buy some RGB LEDs, but since I have the Nikons.... just curious your thoughts.)

[@HappySlappyFace]

Hello, i was wondering if you found a solution to this problem, im thinking of buying a nikon speed light then adding a godox manual flash down the line, how did it go?

[@GilbertTV]

I saw a video from Andrea Carretta using a Newer trigger sat on top (hot shoe) of the X1T trigger so you can fire the new Neewer I6T 600w strobe as well as using (as he did )a godox ad200 as a backlight.

[@sapsdusa]

Thanks Robert. I am a canon user and owns a Canon speedlite 430EX II that i want to use it as an accent light with my Godox AD400PRO as primary light source. Can I accomplish this using GODOX X2T trigger?

[@deehaggard3466]

I have 2 x YONGNUO speedlites YN560III and just purchased the GODOX SK400ii What will I need to buy to get them all work together?

[@HossDiaph]

at least someone who understands what context is. Thanks for the clear message.

[@stcloud8030]

Hello Robert. I just got a Neewer NW562 speedlight and i am trying to sync it with my Godox X1T Trigger.I have a Godox Ad200 pro so i am trying to see the possibility of using both at the same time with my trigger but no luck so far. Please any ideas?

[@lorenzodalessandro6212]

Hi Robert I would like to use an old single pin off brand flash unit with my X1R-N receiver. Can the X1R trigger the off brand flash through its hot shoe which is for nikon? If so, how do I set it up to use my old flash unit? I would like to avoid using the sync cord.

[@robhallphoto]

yeah, the single pin should still align with the central pin necessary for firing the flash.

[@lorenzodalessandro6212]

@@robhallphoto Hi again. Ive tried everything i know to make the old flash fire from the hot shoe on the X1R-N but it wont fire. Do you have any suggestions? Your advice will be appreciated, thanks.

[@rufussamuel924]

can i use Godox TT520 with TT685IIN by using GodoxTT50 trigger?

[@ChristoTjandra]

Hello Robert, very useful information, i'm using Xpro-F on my fuji camera, and connect it with X1R-C to my canon Ex 600 RT, and it worked. But the HSS cannot worked can you help me? My Canon EX 600 RT have HSS and it worked well with my old canon setup.

[@MDMiller60]

I am still unclear about an Olympus E-M1 Mark III body and triggering Nikon flashes and one Phottix Mitros+ (for Nikon) flash, with Radio transmission? Secondly, the Olympus body triggering Godox flashes with radio transmission? Both scenarios hopefully with HSS.

[@mapioskoloni9784]

Can you use a Neewer i6t ex (which is made by CononMark) and a Godox TT600 at the same time? I have the Godox x1 trigger with the passthrough and the trigger that comes with the Neewer.

[@romiemiller3093]

I have to be careful when using my Nikon SB5000 speedlight with my Godx V1 speedlights on high-speed sync. As long as I use a shutter speed of 1/250 it works well. And, I always use manual exposure control.

[@juanmaasecas]

Hello. Thanks for your video. I have Sony and Canon cameras. I just bought a X1T-C to trigger from my Canon cameras my TT350S. The flash works in manual, and HSS and rear curtain sync are working, but TTL is not working. When in TTL, the flash fires at max power and out of sync. Is this normal?

[@hashimqureishi8562]

I have both godox and elinchrom, can I trigger my skyport trigger with godox x1 receiver, so that I can use elinchrom dlite also

[@rahulkattirajastudio2800]

Unable to control light intensity or switch between modes . Using SB900 SB910 , R1, Nikon 850 , Xpro n. But flash fires. Synchronizes properly.

[@robhallphoto]

Is your flash in TTL? You won't see any changes on the screen of the flashes.

[@samsen3965]

Thx & will join the FB group, however... (I'm American!) Will a Neewer Speedlite NW320, on camera, trigger a system of Godox V860II-F 2.4G TTL in same channel? And no not asking about the optical slave.

[@robhallphoto]

No.

[@samsen3965]

@@robhallphoto Thanks. So I missed my opportunity of buying a cheap trigger flash! but I'll order another Godox in this case and should save more first! Again thanks for the reply.

[@renjynx]

I purchase a Canon T7 and a set of Neewer flashes only to find that Canon in their infinite wisdom decided it was best to nerf the hot shoe on their new models so as not to work with other flashes. My solution... get a Godox X2T-C TTL Wireless Flash Trigger with the hot shoe ontop. This not only allowed me to shoot with a Godox branded flash but I was able to place the Neewer wirelss transmitter ontop of the X2T-C and it all works perfectly! Although it looks silly having a transmitter on top of a transmitter but whatever works...

[@rishabhmathur8494]

will this trigger work with Canon 600Ex Rt. ?

[@justinthompson9488]

I have a Flashpoint RL600B and a sony A7iii. I bought the Xpro s and a X1s. I have the X1s hook up via Sync cable and I cant get the xpro s to fire the flash. Will this not work?

[@deganni2688]

always great videos - thanks. i have the xpro with the x1 receiver to power my sb800. i noticed groups a thru d work well in adjusting power, but cannot get it to cooperate in group e. also, cannot control the zoom function for the sb800 from the xpro. any suggestions?

[@mavrik1964]

Hi Robert, thank you for the time you put in. I recently added the new Godox X2Tc trigger to my other FP/Godox equipments and I am trying to use the X2Tc as a receiver only for my R2pro2 commander/controller but they are not communicating! I have tried every possible way and checked out the menus but no go! Are we not able to use the X2Tc as a receiver w/R2pro2 as a master controller? Thank you in advance, we really enjoy your videos...

[@GilbertTV]

I use the X1R on my Rotolight Neo 2 led & still can fire my godox tt600 as backlight to it from my X1T trigger on my camera ..

[@icecoldcash1983]

im beginner in ocf, im havin Nikon d750 with sb700 and i am planning to buy godox flash and what things i should be needed in order to fire them both of them? please help

[@katooga5526]

i heard you earlier you can fire HSS with the nikon SB-900 with the godox x1r-N using an Xpro N did i hear you right?

[@yokyok_remo]

Hello Man. Nice Video very generous of you explaining this thing. Just a newbie Godox user here. I've been using Xpro transmitter attached in my Sony camera and using Godox TT685. Recently I bought a Godox X2TC. Can I attach my Godox X2TC in my Canon 580exii. And control this flash using my XPro Transmitter attached in my Sony Camera? I can't seem to connect my Xpro S to control my X2TC. thank you in advance...

[@FINALFORMSTUDIOS]

I currently have a Sony HV60 Flash and I want to buy a GODOX AD200 strobe and use them together with a Sony A7ii. My question is should I buy the GODOX flash trigger or the Sony Trigger??

[@robhallphoto]

You should buy a Godox trigger, and a godox receiver (X1R-S) to put on the Sony flash. But my first suggestion would be to sell the HV60 and replace it with a godox flash that is compatible with the AD200's so you're not throwing money away on a receiver to keep an overpriced flash that is less capable than the Godox speedlights.

[@FINALFORMSTUDIOS]

Robert Hall Photography appreciate the advice but not a chance I would walk away from my Sony flash. Need it for my run and gun setup.

[@habana3072]

Great video! Can I trigger two canon speedlights using two godox receivers and one transmitter?

[@sirismile2010]

have you find out the answer? i have the same question on that

[@GNOBNX]

Yes you can, as long as they're connected to the flashes.

[@jerrycolt9633]

How do I change the light output on my sb700 from the Godox Pro transmitter without touching the flash?

[@trumannnnn]

I have 2 yongnuo 685 Canon with builted in receiver( equal to godox 685 )and now i have Sony a7iii...if i buy a godox flash for Sony,can i use the old yongnuo too?how?

[@richim543]

Hi Robert. Thanks for great content. I have Nikon Z6 Mirrorless and Godox X2T. When I have my Nikon sb900 on X1R, the flash output always is on minimum like 1/256 no matter which power setting I adjust on the X2T. However, the flash output is normal after I switch X2T to DSLR Nikon D750 hotshoe. Is the Mirrorless and DSLR have different flash sync factors for X2T? Does anyone have this issue when using non-Godox fash on X1R with Mirrorless camera?

[@backstab86]

didnt ask the obvious question.. sony camera, godox x-trigger (whatever type), godox nikon reciever, canon flash... will it work? and i dont mean if ttl or high speed sync, i wonder, will the flash fire? the thing that confuses me about godox trigger (or any 3rd part triggers) is that it for instance says its sony model.. does it mean that both the hot shoe below AND above need to be connected to sony only (yeah i know sony is a bad example cause of multishoe, but who cares) or does it mean that it will work ON a sony camera but can send to any kind of godox trigger, no matter the -s -n -c -f type?

[@robhallphoto]

Any trigger on any camera will fire off the center pin. You’ll still have manual control because that’s based on the flash. If your camera and trigger do not match brands, you will not have sleep, wake, HSS, or ttl functions. This is regardless of the brand receiving strobes. If your trigger and camera match, it doesn't matter what you use off camera, even if they don't match the camera system they will convert ttl and has signals.

[@backstab86]

@@robhallphoto aah okay! Thanks for the info! Have a great weekend

[@wdb1932]

Have you used Godox with Miops? I want to trigger flash and camera for high speed. Thanks

[@djunabug]

For high-speed, I recommend setting all flashes to the same group. I just learned the hard way that there is a brief time delay between groups that results in double exposure effects when trying to freeze fast-moving objects.

[@ThePitipongj]

I have Cactus triggers. Is there a way I can use it with Godox strobes/flashes?

[@linkyfromd.a5424]

how can i use my Godox Xpro(s) trigger to fire a NEWER SK300 strobe? (which i accidentally bought instead of the Godox Sk300)

[@robhallphoto]

Receiver in sync jack, as said in the video.

[@JoshuaJEnriquez]

having problems with SB910 on the X1R N. If i choose manual on teh X Pro trigger, it doesnt give me consistent light output, and also sadly, I cannot do burst shots on this

[@ordonezfederico]

I have a problem with godox Xpro and also X1 that when connected with SB910 or SB700 in 1/1 it make a flash compensation of -2.3 ve, on 1/2 less compensation, an 1/4 also. Only in 1/8 fires at that power without compensation. The compensation appears in the flash screen. Did that happen to you as well?

[@UsmanYousafOfficial]

can I aconnect a neewer strobe or apkina or shanny or any other light with a godox ?

[@robhallphoto]

Explained in video...if it has a sync jack or hot shoe...you can connect it. That's almost every strobe in existence.

[@UsmanYousafOfficial]

@@robhallphoto hmmm... make sense .... I am trying to reach there what you explained .... helpful thank u ....

[@alanabley525]

The FP R2 SPT looks really useful: I currently use Cactus V5 which are not made anymore and are pretty flimsy to control my various sppedlights makes and a Rovelight 600. I'm considering the AD 200 Pro but if I don't have anything Godox can they be used with my current set up for real estate? Also can you mix and max Godox equipment and Flashpoint gear. Just had a marathon viewing of your videos; great stuff. Thanks.

[@robhallphoto]

Flashpoint (R2) and Godox (x series) mix interchangeably. They are identical products with different stickers. There are a few R2 products that have no Godox/global version (like the SPT), but they still work with Godox products. An AD200 can be used with any receiver via it's sync port. You just won't have the remote control or advanced functionality that you do with a Godox trigger.

[@alanabley525]

@@robhallphoto Really appreciate your reply. Glad I subscribed.

[@saeedb3r]

Can Godox Xpro-S trigger X1R-C? I have Sony A7R III camera and Godox Xpro-S transmitter. So I not sure if I buy Godox X1R-C receiver that can trigger my CANON 600EX-RT speedlight.

[@cadmus777]

My understanding is that the only differences between the triggers for the different camera manufacturers is the translation of the signals from the hotshoe, so the signal that the transmitter actually sends out is identical, so they should absolutely work together successfully.

[@ChristoTjandra]

I have tried using Xpro-F on my fuji and connect X1R-C to my Canon Ex 600 RT, it worked !! but i have problem to use HSS over 1/250

[@LuisCruz-yg6rs]

Amazing video. Right to the point. Thank you for sharing it.

[@MrXMI27]

I guess I am visual, I would have like to see the diagram eg Xpro on top of my 850 with my AD200 with e Godox Receiver on my SB5000

[@tonyw5403]

Does the non Godox lighting need to be in TTL?

[@bct1504]

Hi, know if it is possible to usa a xpro(n) to control a TT685(s) flash ??

[@muhammadmuhis6814]

did you figured out if it's possible?

[@xaropevader7329]

Can't they detect a flash being fired and fire as well?

[@techcircles5182]

Hello sir, I want to use nikon sb900 with godox x1r-n for canon 6d with godox x1t-c , i shall be using flash in manual mode please , if u can help me with it

[@Martin-nu6ym]

My Nikon SB700 with the Flashpoint R2 X1R-N can definitely be fired off wireless. But I also have a Fuji EF-X500 that AFAIK will fire with Canon flash connections (I can have TTL and no misfires using a Canon cable between the camera and the flash). Has anyone tried the X1R-C to see if it will work for this flash?

[@adikto79]

So if i use a godox xpro-n with say an AD200, and i have a Nikon flash as a slave mode, the slave (Nikon flash) wont flash?

[@iseenithere]

Canon a godox canon trigger be used with a Nikon flashlight?

[@TyroneVEVO]

neewer q3 with godox x1tn is it possible????

[@edwardnixon1782]

Thanks for posting this and creating a space for questions: Here's mine -- Lumix GH5, Godox X1T-O, Nikon SB28 off camera. My Henry's guy here Toronto says I can trigger the SB28 but that's it; none of the SB28 TTL or power management features are accessible from the trigger. Is the case?

[@clintsteed2434]

To trigger the SB28 with the X1T-O, the SB28 will need to be connected to a Godox X1R-N. You will have manual only and able to change the power levels of the speedlight. At lease on the SB800 it works, I don't see why the SB28 would be different.

[@edwardnixon1782]

@@clintsteed2434 Thanks, Clint. That's a plus over just remote fire. Worth a trip to check it out in the shop.

[@JamesDiedrich]

Will the Godox Flash work with my Phottix system if I put a Godox Flash on a phottix trigger?

[@rsmith02]

Yes, Phottix works with everything as far as I've seen

[@ssdigitalssuresh9697]

Sir can I use godox cpro -N to canon mark iv

[@johnbecich9540]

I thought Flashpoint and Godox were one and the same, "under the hood," so to speak. I own a Flashpoint AD200 and my Godox X2T triggers it every time. Please advise.

[@robhallphoto]

They are.

[@bthemedia]

Please include links in the description to each of the products mentioned 😄

[@stevebirdphotography4831]

Flashpoint R2 i-TTL 2.4G Wireless Receiver For Nikon Flashes (X1R-N) can it fire an alien bee using a cord like pocket wizards?

[@gusvirgant2392]

Hi mate, great video, very clear, and helpful thanks 🙏🏽

[@sagnikdatta9020]

Can I get hss on my yongnuo speed light made for canon using x1rc?

[@robhallphoto]

Is your yongnuo speedlight HSS?

[@sagnikdatta9020]

@@robhallphoto yes sir it is. Technically it should support but confused after seeing many users feedback on online forum that they face inconsistency sometimes

[@sagnikdatta9020]

@@robhallphoto in addition to that can the power of the speeding be changed through my x1ts?

[@sagnikdatta9020]

Have an engagement coming this week and I’m too broke to invest in a new light after getting my first full format camera

[@steviegbcool]

a lot of Neewer, Hanhel, flashpoint, are all Rebranded goddoxes and will work.

[@aineiasbabulis1512]

Guys please help, I have a godox transmiter on my sony a7 iii body. And I want to trigger a yongnuo flash for canon. Do I have to by a Sony godox receiver or a Canon godox receiver to attach the flash on.?

[@Arbaiza]

I’m stuck in the exact same position but with a7r ii using x1t-s transmitter, and Nikon sb900 flashgun. Were you able to figure anything out?

[@stevenevosando8840]

Hey I didn’t know I can use my godox transmitter xpro c on my Sony camera. I happen to put it on by mistake but it worked! 😁

[@ordonezfederico]

Stevenevo Sando it will work only in manual, but you can use it for example an XPro N (Nikon) into Sony, Canon R, Canon Dslr. I test it on a workshop that we all share the same XPro N