Canik TP9 Elite SC upgrades and review

[@Itukaaj]

grateful for this review . I am looking to buy this as my first firearm. I learned more here about owning it than any other video.

[@seanhanley2036]

Hope you went through with that purchase i bought one a few weeks back put 100 rounds through & I’m absolutely in love my friend has a mete & the standard tp9sf i find little to no difference between all 3 as far as accuracy great gun for concealment yet not too small to be a range gun

[@Itukaaj]

@@seanhanley2036 I am just waiting on a bonus check to come through. I had also waited until ammo prices had come down. I had tried to shop for some 6 months ago and couldn't even find any. Thank goodness that is over. thanks for the encouragement!

[@DickRileyTheConquistador]

Know this. The aftermarket accessory mags shown in this video are never available and in stock by this garbage company Canik. Good luck.

[@gunsrus777]

Because they are not made by CANIK, you just said it, Aftermarket. They are made by TAYLOR FREELANCE and can be found at this link, taylorfreelancestore.com/canik/mag-extensions/

[@DickRileyTheConquistador]

@@gunsrus777 Thats why i also said MAGS, because im talking about MAGS from Canik for Canik firearms. I dont give a shit about expensive overpriced Taylor Freelance whom charges as much as an entirely brand new Mag, just for a damn glorified floor plate, and they only allow unprotected credit card transactions, no paypal, like wtf? The canik rep will lie and say "couple wks and they should be back in stock", meanwhile i check back weekly for 9 mths and ziltch. Id sure like to know who you sucked off to get those. Shitty company..

[@TransformersHoarder]

Thanks for the review. I have a burnt bronze version in route to me now. Ordered a Holosun HE507K green dot as well. Nice modifications you’ve got there.

[@mangochampagnelasssi9028]

Eveyone that’s tryna get this bc it’s compact I’d recommend you guys take a look at the mete mci same mags and everything but smaller and sleeker. This one is a bit clunky. Take if from me I have both. Both are great but the mete is micro

[@carloschevere9335]

Not same mags mete is less

[@mangochampagnelasssi9028]

@@carloschevere9335 it’s the same mags compatibility. I’d know I’m using either of them for each other, sure it’s not a flush fit but it’s better than not having mags that can’t fit the same firearm.

[@RepentorPerish77]

The MC9s have been plagued by problems…I’ve had 2 and they both have had issues but my Elite SC has been flawless

[@mangochampagnelasssi9028]

@ I’ve had mine since like 4-5 months now and I’ve gotten through close to 800 rounds now. Flawless. But I do agree some shipments of those aren’t made right at all. My sc elite is a beauty tbh. I’ve made a hybrid glock43x/micro psa dagger it works well too.

[@bryantstafford8763]

I have 2 of them, the tp9sfx, with a holosun 507c ,the elite sub compact , (no optic on the elite sc.Yet) but I find them to be one of the best handguns on the market to date.

[@mikemike7278]

You know of any holsters for the SC with lights

[@gunsrus777]

I have received this one last week it till a month to ship out, but is really nice you can other customized in colors and with the option of the Olight Valkyrie mini or the Baldr mini. www.ebay.com/itm/Canik-TP9-Elite-SC-IWB-Holster-Dual-Layer-Build-Your-Own-/164398381815?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@Shooter60X]

Likewise. Canik Elite SC with the HS 407k 6 moa. Solid.

[@danielreeves6485]

I have an sfx, and a standard elite. The regular elite has been a challenge to conceal. I want the elite sc.

[@gunsrus777]

SFX are great, great guns. But yes is a big one to conceal unless wintertime with a jacket. The SC is a great choice and you have that great trigger still, lots of aftermarket and if you go for the red dot get the Holosun micro, not saying the sig dot is bad just the Holosun is better.

[@Citizen2ACitizenLLC]

Your reviews are always detailed and practical..... I’m definitely inspired.....

[@jeffcolwell8459]

Just bought one recently will take it out soon only thing I done was change the back strap fits like a glove took me 8 yearsand 12 guns later to find gun that fits and this is the one that fits me best

[@cross4082]

I bought the combat green , I love how every single part is matching color

[@problematic_canik]

Grabbed one yesterday traded in my Springfield xd mod2 4 inch barrel got $173 which helped me pull the trigger. I pick this bad firl up on monday. Can not wait. Love the feel in my hanfs and the trigger. Already purchase a kydex and the enigma os holster.

[@conrad9398]

Based on your intro alone I subscribed

[@smoke362]

I have one with a swampfox optic. Vey accurate I love shooting it. You can’t go wrong buy one. Great review.

[@gunsrus777]

I was looking at those at OpticPlanet.com at a great price. I like the look but some were leaving a bad review. Im looking to swap mine with a Holosun 407k green dot 6 MOA, I have the same one mounted in my CZ P10F, great optic. Thanks for watching, please subscribe.

[@rik4369]

Great review! I have the same weapon for over 1 year. I put a Red Dot on my SC and I can't miss. I like those magazines! Great Work!

[@inspiringgrillingcookingtr6821]

I guess mine is stubborn I gave in and took it to my local gunsmith if he's going to fix it for me. Definitely looking for it again thank you for responding keep up the videos my brother

[@EM-mk2fu]

I like what you did with the gun, mine is all black and I'm gonna add the extended mag soon, it looks really good

[@gunsrus777]

I wanted all black but thats all they have at the gun store. Enjoyed good pistol.

[@oyahzi]

Going to buy this weapon soon, was looking for attachments. Thanks for the review.

[@metronomeyobihh]

That recoil spring is crazy when you first get it.

[@gunsrus777]

Lock the slide to the rear without magazine when you storage it. That will loose the spring tension a lil.

[@dimitri2414]

@GUNS R US thanks just got mine will do

[@nicksrandomviews1296]

Nice upgrades man. New subscriber

[@ohg2tone574]

Enjoyed this video man . ✅🙌🏼

[@josephweaver9674]

Great review! just ordered mine yesterday.

[@michaelhoward5532]

Have this and the Mete MC9!!! Cannot beat the performance!!!!! Dead Accurate!!! Thx for your time!!

[@Just_My_Reviews]

Great video, and those guns are crazy 👍🏼

[@molonlabe9602]

You're a Canik man...better than being a Glock fanboy any day.

[@andrewvillavicencio8496]

Love my Canik SC with Swampfox Sentinel. Fits right in, no modifications and is awesome!

[@kmosley8991]

Nice review on the canik tp elite sc. I have the all black one to match the holster.

[@humanityrising9378]

Daddy's bringin home the ribs! Chomp! New to your channel and enjoy your content!

[@absolute5964]

I absolutely love that sleeve though!!

[@Supercharged1976]

Need to get the 45 blast two tone compensator for your SFX

[@ClassEdits]

Just picked up one of these up at the gun show. I love everything about it and it looks great. Thanks for the tips on the holster

[@anthonyflo-restortion854]

Can you do a accessories review on your other canik tp9

[@jampav33]

I really like what you did with sfx

[@americandumpsterfire5201]

Gun looks sick, just got my elite tp9 sc and wanting an optic and olight. Was curious what holster your running to accommodate the light. Thx

[@willie110hh]

I have the Tacstyle IWB and love it!!

[@MikeLitty69]

​​@Willie Powell too bad they don't sell them on etsy anymore. Sucks because I need a holster like that

[@mkhan1232]

Do you know how to tell which is the latest combat executive canik. Is there a serial number or new name. Also, whn was the latest release. Will be great to know.

[@gregoryboehm7090]

Thank you-for the info my man I appreciate it

[@thewolf766]

I love this Canik

[@oyahzi]

Is there a holster that allows you to have the flashlight and the red dot equipped at the same time?

[@stevealexx]

How much did everything run you for?

[@GianiPhasta]

I can't find the same plus 9 adapter you used Taylor. The link goes to a diff adapter.

[@michaelweaks2163]

Love the video. Thanks for the info!

[@Husslelyfe]

Thanks for the gems I’m ordering mine now

[@oakwoodmike]

Good info. Nice build. Where did you get he mag extensions?

[@coleschmitz6187]

Love the set up!

[@1Bonehed]

Great review. This will prob be my next firearm. I'd love to get the SFX Rival, but I need a good carry & the TP9 Elite SC doesn't seem to have any competition for the price.

[@sliderkitz]

Awesome gun for sure. Be aware it is BIG for a subcompact! Way bigger than the shield, p365, gx4, and hellcat. But it is an awesome gun no doubt about it. Best trigger in its class

[@1Bonehed]

@@sliderkitz that's actually some of my appeal to it. I don't care for really small handguns. same reason I'd prefer the Hellcat Pro over the standard hellcat & this Canik is the best new gun bang for the buck I can find to date

[@sliderkitz]

@@1Bonehed with that reasoning, it makes it the perfect gun for you, glad to hear that!

[@mangochampagnelasssi9028]

I have this but for the 20 round I have 3 mags all gold brass color. But the plus 9 so 29 shots but for my mc9 mete

[@Mr.trapalot1001]

What is the name of the magazine

[@mangochampagnelasssi9028]

@ the Taylor freelance plus 9 magazine extension plus the regular 20 or 18 mag

[@siwabhongdhanabhad3568]

good review thank you

[@alvewill]

Awesome review. This is actually the gun I want next. Where’d you get that mag bc that’s dope

[@gunsrus777]

TaylorFreelance.com is a +9 extension for the 12rd that comes with the gun. Thanks for watching!

[@hunterkilpatrick8580]

have you found a holster that will hold a flashlight and a Reddot?

[@ffownage]

Legacy Firearms Co makes a holster for it.

[@flexipino]

too funny. I have the tungsten grey Elite SC and my TP9SFX is stormtrooper white frame with black slide. I never thought about changing the triggers because they are already soooo good haha. Did you use the optic plate for your red dot or did you mount directly to the slide? I can't tell from the vid.

[@kogasoldier9379]

He’s got the plate on there. If you’re getting one and planning to add an optic I’d advise using the plate because it has detents that will help keep the optics in position. Don’t worry too much about it being plastic. If you Mount it right it’ll be fine.

[@gunsrus777]

I do have the plate, I will removed and check because I have a question myself. I get it the plate have the detents, but some plates don’t have detents to the slide, so in other words the plate is useless if the plate is mounted to the slide and still move. Unless the slide is a perfect cut for the optic length. If you are using torx screws the optic wont move, the head of the screw is in a cone shape so wen you thigh the screw the cone shape makes pressure adjusting to the size of the optic hole, and thats why it wont move

[@taedoe]

so i see on taylor freelance it says it’s for 18 or 20 round mags. didnt you put yours on your 12 rd mag? or is that a 15rd mag? want to order this but i want to make sure

[@gunsrus777]

In the 12 rd

[@gunsrus777]

Is for the 18rd and I initially ordered for my SFX but try it to see if work and it works perfect. But in the 12 round in addition to that you will have to cut couple of coils in the spring that come with the taylor extension, because remember that spring is for longer mag, please dont go to crazy cutting coils, I would cut 2 and put it tougher, if doesn’t fit 21 take it off and cut an additional coil. Please let me know how many coils you end up cutting, becuae I dont remember and to put it out for the next person asking, thanks in advance.

[@YEETUS_DELETUS_]

Guns r Us is an amazing channel name lol

[@mrmorrisjh]

Nice set up

[@inspiringgrillingcookingtr6821]

Love the videos... On the Canik sc I want to add the a Romeo zero, but I couldn't get the plate off. Feels like it's has lock seal on it. Have you did an video on the install?

[@gunsrus777]

Once you remove the screws with the slide off introduce a drive pin punch in the holes from under the slide a tap slightly, will come off.

[@Legally_its_a_joke]

I had to whollop on mine several times, just have to be careful but confident

[@Finesse_MES]

Can u put a silencer on this once the threaded barrel is installed?? Or is it not going to load or fire right? Being compact

[@gunsrus777]

Yes you can

[@preacherairsoft3086]

Tremendous video brother, I ask you, how could you fix the holster to use carrying it inside? Why does she come to carry it outside?

[@rrod42578]

Hey I just bought this gun and I love it I have an optic sight on it I want to put the o-light on it but I can’t find IWB holster that has the light and sight openings Do u know of one like ur videos

[@gunsrus777]

I cant find the company that made mine. But you can check on ebay. I have learned how to do them, so now the sky is the limit.

[@rrod42578]

@@gunsrus777 can u make one for me if u can

[@jasondeharo98]

Great video! What springs did u end up changing it to make it feel better and not get stuck to much!?

[@TheRealNinoBrown]

Can you get stippling for the canik tp9sf???

[@OGSERB]

How were you able to use the +9 extension with the 12rd mag? I thought it was only for the 18 & 20?

[@gunsrus777]

It is for the 18rd mag. I have a Canik TP9SFX, I have ordered for the 18rd mag. But before I had tried in the 12rd and it worked perfect. Only mod you have to do is cut a couple of coils from the spring because is made for the 18rd. I dont remember how many I have cut, but you can start from the bottom with two, put it together and add the ammo if fits 27 you good. Make sure there is space for 28 very tight, meaning hard to put the 28rd and then removed so you have 27 left. The reason is to have some space to compress when you insert the magazine.

[@OGSERB]

@@gunsrus777 Awesome, thanks for the reply and info!

[@niceguy6827]

What ammo you shoot with the Canik tp elite sc?

[@gunsrus777]

SIG SAUER VCROWN HOLLOW 115 grain. For target practice anything available

[@camer0nlyle]

Where’s the mag extension from ?

[@nccr-13pr72]

I must say that she is beautiful. Out of curiosity are those magazine extensions compatible with all of canik’s magazines(10, round, 12 round, 15 round, etc)?

[@gunsrus777]

Most of them but not sure if they will fit all. I believe the 10rds are limited, I think they have a piece to block the mag since is a mag restricted for those states that are restricted to 10rds only.

[@LadyBNatural]

Can you please put the details in the description? Where are you finding these upgrades?

[@gunsrus777]

Added, thanks for watching, and please subscribe.

[@GunsandGrubb]

I did like the review and im sub

[@coleschmitz6187]

Do you have the +9 extension on the 15 round magazine? And did it come with the mag spring for the 15 round mag? All I saw on taylor freelance was the +9 for the 18 round magazine. Wasn't sure if the spring that came with it would work on the 15 round mag...

[@gunsrus777]

No, the 12rd otherwise will be a gap between the grip and the extension, with the 12rd there’s no gap. I did that and order another 12rd.

[@carlirby828]

Where did you get that extended magazine from?

[@gunsrus777]

Taylor Freelance, is for the SFX but fits on this one.

[@antoniocampos1629]

just a tip, never drop a round directly in the chamber like you did, it can damage the extractor

[@gunsrus777]

Appreciate the advise, definitely dont want that to happen. Thanks for watching, and please support my channel subscribing. 👍🏼

[@dannymartial7997]

In the video, it looks like the mags need to be slammed in, otherwise, it pops back out. Is it like that originally, or is it due to the modded mag?

[@gunsrus777]

You don’t need to tap it but yes there is definitely lil more tension that the original mag and that is due to the spring tension inside the mag and the mount of rounds that gets push down when the mag is inserted in the pistol. Means there is more pressure when the round hits the ramp under the slide when inserted, that happen when that last round is thigh, if you remove that one last round for a total of 20 and not 21, the mag will not need to be forced at all. I have tested myself, hope that answer your question. That happen with most of the mag extensions they are rated 4-5 for example, and that fifth round fit but tight.

[@rodneydunnigan9291]

Damm you just taught me something, how much to get that handle adapter you said someone 3D print them, want one for my tp9 elite SC using the tp9 mod 2 clip

[@gunsrus777]

bloodywheelsusa.com/store/ols/products/canik-tp9-elite-sc-9mm-magazine-sleeves

[@rodneydunnigan9291]

@@gunsrus777 Good Review & Thank you, The Options these CANIKS Have are wild, Coming from a 1st time Gun Owner 👍☺️

[@thedonutmiata5135]

Do you have suggestions for a conceal carry holster that will support the light and sight on the pistol?

[@jonathanchambers7305]

That’s the Olight baldr S right? S

[@gunsrus777]

No, this is the regular mini, not the S.

[@jonathanchambers7305]

Damn, I just ordered the S I hope it fits

[@_mannyblendz_]

Do you need a mount plate for the romeo one?

[@gunsrus777]

Yes, online the romeo zero will fit without a plate

[@ronaldstinson4734]

Good morning! I read that you "clipped" springs in order for the extention to cycle properly? How much did you Clip and do you have a video showing it in action!? Thanks!

[@kogasoldier9379]

If you’re using an extension the last thing you want to do is clip the spring. You’re adding more room so you should be ADDING spring.

[@gunsrus777]

So, this +9 is made for the 18rd magazine. In this case I have tested and fit perfect to the 12rd, same concept but in a shorter mag. And thats why you have to cut your spring, not the one that comes with the 12rd mag off course. You will cut the spring that comes with the kit, the +9 extension. I have 14 coils on mine, don’t remember how many I had cut. But that will work for you.

[@gunsrus777]

Once you assemble the mad, if you don’t get 21rd, cut 1 more coil. Some springs are thicker than others.

[@gunsrus777]

Confirmed, best to use the plate on this one

[@bobbydynamite]

Great vid. I used a L shaped hex wrench to change brightness settings.

[@mightyj6210]

i just brought the plus 9 extension worried that my screw isn’t tight enough does yours has play between the mag n extension ?

[@gunsrus777]

Not that I know, but I’ll check and let you know.

[@Mattspacks]

How does the magazine extension run in the elite SC? Is it reliable?

[@gunsrus777]

Yes it is, Taylor Freelance are top notch.

[@Mattspacks]

@@gunsrus777 thank you I just ordered one. I will subscribe for great video and comment response

[@mykogreen97]

Where can we find the plus 9 mag extension?

[@gunsrus777]

taylorfreelancestore.com/canik/mag-extensions/

[@elcompa__.-NG]

How did you modify the holster like that?

[@brylerbelt3531]

Could you possibly fit the 9 round extension on the 15?

[@gunsrus777]

Yes you can, but you will have a gap between the grip and the magazine floor/extension, but you can add a spacer from here, bloodywheelsusa.com/store/ols/products/canik-tp9-elite-sc-9mm-magazine-sleeves/v/CNK-TP9-ELT-SC-MCG-TP9-BLC

[@jenniferdavenport4880]

Will the spring in the mag hold up I feel it might not be long enough for all them shots

[@byronmorrison9653]

When you added the +9 from Taylor freelance did you need to replace the spring in the 12rd sc mag or does it cycle properly?

[@gunsrus777]

The plus +9 already comes with the spring from Taylorfreelance. Using the 12rd spring won’t cycle. Now, that spring that comes with the +9 is made for a 18rd mag so you will have to cut a couple of turns from the spring. I don’t remember how many turns I have cut on mine but I’ll start with two and try to fit 21rds but if is to tight I’ll cut one more and then try it again. Don’t go crazy cutting turns, be patience.

[@byronmorrison9653]

@@gunsrus777 thanks a bunch!

[@cmdshort6568]

Where can I get the grip and the extended mag from? I just purchased this canik yesterday and I want to know where I can get this

[@gunsrus777]

The extended +9 and the backstrap from taylorfreelance.com

[@cmdshort6568]

@@gunsrus777 heck yea man u got any social media like insta or Twitter so I can tag u for my build?

[@gunsrus777]

I don’t have social media. Sorry

[@VvsBrooks]

Lol “sausage fingers” 🤣😭

[@truesaiyan8310]

How offten do you have to recharge the flashlight?

[@gunsrus777]

I dont use it that much, but not often.

[@CHASINGKAI]

What holster should I get if inhale the same set up but don’t wanna take mods off to holster it ? Been looking for one but can’t find a great one

[@powernoodle1224]

Where did you get the insert for the full size mag? The thing that is similar to an X-Grip. Thanks.

[@gunsrus777]

www.ebay.com/itm/BloodyWheels-Sleeve-for-Canik-TP9-Elite-SC-9mm-READ-ITEM-DESCRIPTION-/154471357119?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@timnavarrette6932]

Is that olight the mini?

[@marcusmartin4076]

Where do I? Find that extended mag?

[@davioncooper1001]

Just picked up one of these bad boys yesterday. I added a crimson trace 1500 for the optic. What holsters are good for this combo?

[@TheGrayMan_]

Legacy holsters

[@boxedinfo]

You have link for the red dot & flashlight? Thanks

[@gunsrus777]

For the light, www.olightstore.com/baldr-mini.html

[@gunsrus777]

For the red dot, www.opticsplanet.com/sig-sauer-romeo-zero-red-dot-sight.html

[@boxedinfo]

@@gunsrus777 Thanks really appreciate the info

[@rich1958]

Can’t decide on this or Cz p-10s??

[@rexmanayan6122]

Nice video. What Holster do you recommend to accomodate the Olight/Laser?

[@gunsrus777]

www.ebay.com/itm/Canik-TP9-Elite-SC-IWB-Holster-Dual-Layer-Build-Your-Own-/164398381815?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@ChesterMcCoyJr]

Muddy River Tactile website will have it.

[@KingOfNy9]

Have you noticed the finish on the slide come off??

[@gunsrus777]

Now that you mentioned, yes. I dont use it that much, but i see some black spots under the gray wearing out. Maybe the coating is not that good. Time for a nice custom cerakote.

[@KingOfNy9]

@@gunsrus777 Thanks for getting back. Been debating on getting this or the cz omega. My biggest thing I’m concerned about is the coating coming off. Canik has a new version of this already cerakoted, that’s the one I was thinking about getting. My friend has the bigger Canik, and their is tremendous signs of wear. Then also I’m not trying to spend crazy money on another firearm. I already have 2. Smh

[@OGSERB]

This gun is so nasty. Just pick mine up Monday. Put 200 rounds through it same day. I ordered the brass TF back strap in black to hopefully balance it out a little better. So hard to rack though. Did you get the reduced spring?

[@gunsrus777]

It is, no i haven’t got the recoil spring yet. Remove the magazine and lock the slide to the rear when not in use. That will reduce the tension in the spring.

[@justinmielsch5924]

It will break in over time do not put a lighter spring

[@10MilliJay]

Did you swap spring or kept the same spring in the 12rd mag ?

[@gunsrus777]

I did swap the spring, you have to. I used the spring that came with the extension. Now keep it in mind that the spring is made for a 18rd magazine, so that means that you may have to cut a couple of coils. I would just put the new spring and see how many rounds will fit, if it fits 21 then you dont have to cut. But i believe I had to cut two coil from the bottom, never from the top.

[@10MilliJay]

@@gunsrus777 I’m trying it on my 15 round mag I wish they would make oem 30 rounders I’m thinking about modding the beretta 30 rounder

[@gunsrus777]

grabagun.com/pro-mag-industries-can-a3-canik-tp9-9mm-32-rd.html

[@gunsrus777]

@@10MilliJay you can do it in the 15 rd mag but it will be a noticeable gab, because the mag floor of the 15 rd extent to the gun grip and once you remove it and place the +9 will leave that empty space. Unless you purchase a 15rd spacer for the SC.

[@xOUTLAWxVENOMx]

I’m looking for a holster that fits with the olight for my canik. Any recommendations?

[@gunsrus777]

I got this one from eBay but will take a month, really nice and well build. www.ebay.com/itm/Canik-TP9-Elite-SC-IWB-Holster-Dual-Layer-Build-Your-Own-/164398381815?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@derrickmoul5920]

The hard part isn't finding a holster that is light compatible. The hard part is finding a holster that is optic compatible, and even harder if you're a lefty like me.

[@brandonUwanawich954]

Good review but be careful bro flashing your self with the muzzle

[@gunsrus777]

Haha! Couple of guys already said that. I’m flashing the camera not my face in seating back showing the gun to the camera. Looks like but not reality.

[@AllSoWavyReese]

Where did you get the plus 9 extension??? I need the link

[@gunsrus777]

Taylorfreelance.com

[@redeye8526]

If youre going to carry it with that extended mag why not just carry a fullsize Mete or TP9 ?

[@chucksw1]

Im sure extended mags help out at the range!

[@gunsrus777]

No, spare mag

[@YSo_Joker]

Did you get the spring yet? I’m looking for but trying to find a good review on one

[@johnkerr1435]

If you goto century arms website and email their cs, they will send you 1 for free. Tell them you heard there was a lighter recoil spring and they will email you back and ask for the serial number and your shipping address. A guy on the canik nation group on fb told me about it the other day

[@YSo_Joker]

@@johnkerr1435 thanks for the info. I didn't know there was a fb group. About to join that now?

[@1ManBandGaming]

Where you get the plus 9 from

[@gunsrus777]

Taylorfreelance.com

[@CHEVYDIPPIN]

I hooked up my tp9sfx with the Tlr 9 and vortex venom 3MOA after I watched your video of your full size, it looks really good. Just need to get me a mag well and charging handle from TF. My gun is the sniper gray.

[@gunsrus777]

Nice! HB have the internal springs to reduce trigger pull weight and it’s easy to install they also have a video, how to install.

[@ronaldstinson4734]

How does that plus 9 shoot! Is it reliable!???

[@gunsrus777]

perfect

[@v.german11b]

I am a Canik fan. Have 2 Canik TP9 models and 1 METE SFT. I think the Elite SC is a great subcompact conceal carry pistol. You have a nice one. With that said, extending the magazine capacity totally defeats the purpose of concealment.

[@gunsrus777]

I have tested this extension at the range today and works flawless. I don’t recommend it for concealment but for spare mag or in the pistol while traveling on the road. I used today my most hated Olight Baldr mini laser and this thing was nailing dead center, very impressive. Not gonna lie, better that my P320 x carry.

[@v.german11b]

@@gunsrus777 that makes sense. I like Olight tactical lights, I have several, but I highly recommend also to own battery operated lights, like the Streamlight, Inforce, and Crimson Trace, for the field. You cannot rely only on electricity to charge up your light. Hence, I have those 3 brands. What other Canik models do you have?

[@gunsrus777]

Agreed 100%

[@gunsrus777]

As right now this one an the SFX, just two for now.

[@v.german11b]

@@gunsrus777I highly recommend you the METE SFT or SFX. The METE models have the best trigger pulls for striker-fired handguns. It improves your accuracy noticeably.