Canon MF641cw hard reset

[@jafferabbas1153]

Excellent solution. Canon was recommending sending the printer back for a reset. Shocking !!

[@cartridgeworldvestavia4481]

You are very welcome & not surprising! Next time you need toner give us a try at www.cwvestaviahills.com.

[@jchacon9362]

Thank you, you fixed my slow printing issue on the Canon MF743CDW :)

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@GisCDP]

You are my HERO! I didn't remember ID and PIN for my MF643Cdw and Canon support asked about 100€ to reset it! Many many thanks

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need supplies give us a try at www.cwvestaviahills.com/ or just give us a call at 205-822-6767.

[@jamesbrooks1251]

It took a few tries, but it worked for me. Thank you.

[@cartridgeworldvestavia4481]

Good to hear! Next time you need toner give us a try at www.cwvestaviahills.com.

[@wruizm774]

You saved me!! I lost the Syst Mgt ID and PIN lol Thank you so much!!

[@cartridgeworldvestavia4481]

You are very welcome! Give us a shot on your next toner order at cwvestaviahills.com. Thanks, Bill

[@ChristianGomez-d4g]

insanity that this is hidden by canon. This was exactly what i needed to fix my printer. thank you

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@neuriprince]

Thank you so much for this! I've also forgot my Remote UI credentials and printer was stuck behind a login screen. Everything is fine now :)

[@cartridgeworldvestavia4481]

You are very welcome! Give us a shot on your next toner order at cwvestaviahills.com. Thanks, Bill

[@haydarm.al-samawe9819]

Thank you for the excellent information, i have an error "paper jam" even when I take the paper out from the printer it keeps giving me this error, do you have a solution for this issue? with respect

[@cartridgeworldvestavia4481]

Hello! Most likely there is a sliver of paper caught in the back of the printer where the fuser is located. Open the back and with a flashlight see if there is a piece of paper stuck or sticking out.

[@haydarm.al-samawe9819]

@@cartridgeworldvestavia4481 trust me I did Sir , there is nothing, I'm also surprised it's first time I see this kind of problem

[@elisemondragon1092]

When I push home, left of home then right of home and the volume button it just goes to the volume screen. It's the same printer as yours.

[@cartridgeworldvestavia4481]

After you press the volume button you must press the stop button (Red circle with upside down red triangle)

[@trayreece9432]

Does not work

[@dast3971]

Doesn't work for me either

[@SheeBossStudio]

Doesn’t work for me

[@julianalgieri]

It did not work for me for the longest time. I tried like over 20 times. I left the printer came back to it tried it again it worked! I did the same thing that I was doing the first time. So stupid. very frustrating trying to do this combination.

[@pinkmillk]

Thank you, good sir!

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@MB-mw1xr]

Great video and explanation of the steps! My issue is I cannot find the application (either on the printer itself or driver on my Mac PC) to clean the print head? It shouldn’t be this difficult to locate. Thanks in advance!

[@cartridgeworldvestavia4481]

This printer does not have a print head. Only inkjet printers have print heads that can be cleaned. Are you having quality issues?

[@MB-mw1xr]

@@cartridgeworldvestavia4481 I figured out the cleaning process for my printer. (It’s certainly different from what I’m used to.)

[@cartridgeworldvestavia4481]

@@MB-mw1xr Good to hear! It's a great printer and it will last you a long time. Give us a try when you need toner. www.cwvestaviahills.com/

[@danielliao_svp]

Really helpful, thank you!

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@Ansim-y5j]

Thank you !!! i need it to try 5-6 time but finally worked!!MF655CDW.The Cannon support only want to take money for everything😡 .... I reset the System Manager Id and Pin.Thank you!😀

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@msrty9]

So the stop button doesn’t work anymore. Any other way to reset the printer

[@cartridgeworldvestavia4481]

Unfortunately this is the only way to perform the reset.

[@CreativeWerxGFX]

Toner levels too?

[@cartridgeworldvestavia4481]

This procedure will not reset the toner levels.

[@wardobuffalo64]

Totally helped thx

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@ofitest1383]

Thak you. es el único tutorial que funciona!!! Maravilloso!!! funciona para una MF450 - 455 de Canon. Muchas gracias!!

[@cartridgeworldvestavia4481]

De nada!!

[@recorobinson8533]

Thanks, life saver it works🎉

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@ferzeli.ferzeliyev313]

Thank you

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@fi2al]

Thanks so very much ❤❤❤❤❤❤

[@cartridgeworldvestavia4481]

You are very welcome!

[@fi2al]

@@cartridgeworldvestavia4481🙏🏻🌹🌹

[@romancedr199]

Worked 💯 thanks!

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@starguidesyouhome]

It will not work for me. Unplugged and tried several times.. I was messing around and must have set a pin i cannot remember and i am stuck. Any advise?

[@cartridgeworldvestavia4481]

Hello! I'm sorry you're having issues with the hard reset. Make sure when tapping the touchscreen you are applying firm pressure. What model number is your printer?

[@CP-ux9zd]

@@cartridgeworldvestavia4481 mf731 doesn't do anything. there is no response when pressing left and right of home button Firmly, I still contined the process many times home, left, right, volume, stop. nothing😤

[@mosesbracha4850]

THANK you THANK YOU

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@shadowscythechampion5365]

Is there another way for hard reset? The button isn't working

[@cartridgeworldvestavia4481]

Hello! This is the only way to perform the hard reset. Sometimes it will take multiple attempts for it to work.

[@cahighco7896]

Thank you!

[@cartridgeworldvestavia4481]

You are very welcome! Give us a try on your next toner order. www.cwvestaviahills.com/

[@hughbreese573]

@cartridgworldvesavia4481 This procedure does not work on my MF644CDW. This is a fairly new printer. I purchased it about 6 months ago. After pressing the Home, left of Home, right of Home, Volume, and Stop.. I am left looking at the Volume screen (It is not displaying the same volume screen as your printer. It displays the Fax volume.) The touchscreen stays on the Fax volume screen. It never changes to the Service Menu screen. I have tried gently pressing, firmly pressing, pressing slightly left-right of the hidden buttons. I get the same results. Do you have hard reset instructions for my Canon MF644CDW printer?

[@cartridgeworldvestavia4481]

Hello! It's odd that the hard reset doesn't work on the 644cdw since they are basically the same printer. My only suggestion would be to unplug the printer, wait 5 minutes and plug it back in and try the steps again.

[@amberkost9933]

Like many in the comments, mine stops at the volume and doesn't allow the stop button to do anything. New printer, and about to toss it out the window. $300 for an eyesore on my desk. Has ANYONE found a solution to this? My display touch barely works, so the screen isn't likely to help. Is there a way to physically reset the machine?

[@cartridgeworldvestavia4481]

Hello! Sorry for the delayed response. Make sure you are applying firm pressure when tapping the screen and volume button. What mode number is your printer?

[@vs7777yt]

It is a horrible piece! The printer is great, but the controls are abysmal. I got the service advising me to press home, then press volume on the side of the control panel, then 5 times the stop button in quick succession, and then volume again on the side of the panel. A menu should come up and you need to enter 43810 code. That should bring you to the service menu. My stop button did nothing in this sequence and after repeating the sequence about 100 times, I gave up and ordered a new printer. I did apply a firm pressure and changed the speed of sequence- but no luck. When I go for the copy or print function and press the stop button in the middle of the copy - it stops the process, but in this case of waking controls, it just does not react. my printer is MF733cdw

[@pippispins33]

My daughter broke my LCD screen. Canon replaced the printer. But i still have a fully functional printer, just with no screen. Is it viable to replace it? Use it remotely? I'd like to give it to my parents bc it's a great printer, seems a shame to just trash it.

[@cartridgeworldvestavia4481]

Hello! Replacing the LCD screen would cost more in parts and labor than the printer itself. If it still prints well you can keep it as a 'print only' printer.

[@pippispins33]

@@cartridgeworldvestavia4481 Thanks! Yes it still prints, but how would I even connect it and the wifi etc without any screen function?

[@cartridgeworldvestavia4481]

@@pippispins33 Unfortunately without the touch screen you wouldn't be able to have wireless functions. You can only hardwire it with a USB cord.

[@waynebell3452]

My Canon MF641Cw will not print the color red.

[@cartridgeworldvestavia4481]

Hello! This could be caused by a handful of things. Most likely you are out of magenta toner. Did you download the correct drivers from the Canon website? Are you making sure you click 'color' when printing?

[@waynebell3452]

I have plenty of Magenta toner, 40%. Yes, the correct drivers are downloaded for this particular printer. Yes, the print setting are set to color. I have performed all of the maintenance task on it. I have hard reset the printer as per your instructional video, which I thought was very clear. Thanks for no background music. I only use Canon toner. Never have used anything else. It has always been kept in a clean environment.

[@cartridgeworldvestavia4481]

@@waynebell3452 The only thing I can think of is the magenta toner has failed. Do you have a backup you can try?

[@JessicaFEREM]

I have a mf264dw Ii and after a power outage the printer gets stuck at a loading bar. I assume it's not able to boot. Tried everything

[@cartridgeworldvestavia4481]

The power outage could have fried the cord. Try getting a new power cord and plug it directly into the wall socket.

[@anthonyh2884]

Nice! 👍🏽🥳

[@cartridgeworldvestavia4481]

You are very welcome! Give us a shot on your next toner order at cworldvestaviahills.com. Thanks, Bill

[@DroidMe-db5en]

boss may i ask....mine canon same as u...but today when i turn on...there's no display at panel screen.Can u tell why this happend,or can u tell how to fix this .tq

[@cartridgeworldvestavia4481]

Hello! Sorry for the delayed response. If the display screen isn't turning on then the printer has failed. Try and plug it directly into a wall socket and let me know if the screen turns on.

[@ErickCarbajal18]

Me salvasteis la vida hermano

[@cartridgeworldvestavia4481]

Eres muy bienvenido!

[@LevneSnowboardyCZ]

Thanks a lot !!!!

[@judithlefevre9531]

This does not work on a 743CDW, tried a dozen times, pressing the volume button after the suggested button presses just brings up the volume, not the menu shown here on this video.

[@cartridgeworldvestavia4481]

Hello! Try this: Tap 'Menu', 'Management Settings', 'Initialize all date settings', tap 'Yes'. It then should reset and ask for you to enter language and current date.

[@dorothygallardo9166]

I follow this video, but after i touch volume, it gives me a fax volume screen.

[@cartridgeworldvestavia4481]

Hello! Make sure you are pressing gently yet firmly when starting the process.

[@chesterullrich2525]

Doesnt work for 634…. 😓

[@cartridgeworldvestavia4481]

Try this link from Canon. support.usa.canon.com/kb/s/article/ART169444

[@MariaHeartSpa]

Doesn't work the stop botton

[@cartridgeworldvestavia4481]

Hello! Sometimes the process has to be repeated before it takes. Unplug the printer, wait 1 min, plug it back in and try again.

[@MariaHeartSpa]

It worked thanks

[@cartridgeworldvestavia4481]

@@MariaHeartSpa Great! Next time you need toner give us a try at www.cwvestaviahills.com.

[@วุฒิพงษ์กลสรร]

How to set Language Japan to English

[@cartridgeworldvestavia4481]

When the printer reboots you'll be able to change the language

[@damonrichardson2562]

This video was a life saver 🛟 thank you, thank you, thank you!!!

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.

[@CP-ux9zd]

wish it worked ..nothing

[@xanmarino]

THE 1ST STEP DOESNT WORK

[@cartridgeworldvestavia4481]

Make sure you are applying pressure on the touch screen

[@trmckin]

this printer is the worst. so finicky. ready to trash it.

[@cartridgeworldvestavia4481]

Sorry you are having issues with it. What's the issue?

[@dyspeezy]

same. It has sucked since the beginning. cannot print remotely, always disconnecting, wont show my wifi just issues nonstop

[@smiles8719]

I did the process but w nothing comes up after pressing the red inverted triangle. I'm just stuck with the volume settings 😢

[@dast3971]

@@smiles8719same

[@SthakhenakAglaw]

Thank you

[@cartridgeworldvestavia4481]

You are very welcome! Next time you need toner give us a try at www.cwvestaviahills.com.