Canon R5C USB PD External Power - Power for 8k60 with USB PD (it works)- 4k Record times Anker PB

In this video we cover two different power solutions for recording on the Canon R5C with USB PD - USB Power Delivery options. We cover the Anker USB Power Bank and the FXLion Nano 2 Power bank. Did you know you can hot swap the batteries.
VMount USB-C Power:
FXLion Nano 2: amzn.to/39qmOGo
Anker USB Battery Solution:
1. Anker PowerCore+ 26800mAh PD 45W - amzn.to/3s4gN9b
2. SmallRig Universal Power Bank Holder, Clamp 2790 - amzn.to/3vzNjlI
Other Adapters:
shop.usa.canon...
www.bhphotovid...
*** IMPORTANT* ********************************************************
Both the Vmount Solution and the Anton Bauer Base requires the Canon DR-E6C (specific to the R5C) and the Anton Bauer P-tap to Canon 9V cable to record in 8k60
****************************************************************************
V-Mount Solution:
1. IndiPRO Tools Micro-Series V-Mount Li-Ion Battery - amzn.to/37a3xIQ
2. Nitze V Mount Battery Plate with 15mm Rod Clamp - amzn.to/37UYzjq
3. IndiPRO Tools D-Tap to LP-E6 Dummy Battery Cable - www.bhphotovid...
4. SmallRig R5C Cage Kit - amzn.to/3kvqkBK
5. SmallRig Base Clamp Rold Clamp - amzn.to/3OOQtcC
6. SmallRig 15mm Carbon Fiber Rod for 15mm Rod Support System - amzn.to/3KzdBbN
Canon Battery Grip Solution:
1. Canon BG-R10 Grip - amzn.to/3LBmKSE
Battery Base Solution:
1. Anton Bauer Titon Base Kit for Canon LP-E6-Powered Cameras - amzn.to/3vYXcYS

[@MrShadowsports]

So hot swap is possible in video mode, but not in photo mode. Just confirmed with my R5 C. Thanks Anthony! I'm using a SaFuel 45w PD.

[@AnthonyCrouchPhotography]

Good to know, makes sense, different operating system, camera mode, R5 operating system, video mode C70 operating system

[@EduardPetrosyan007]

Thank you, my dear friend. You provided a clear and understandable explanation, which is highly valuable. Your video turned out to be extremely helpful. I intend to subscribe to your channel and give it a thumbs up. You are a friendly and experienced specialist.

[@titusnixon]

I got the FXLion, I like the V-mount. I have 3 extra LP battery on stand buy when shooting Video

[@AnthonyCrouchPhotography]

Very nice. That's a nice battery. I am using the power base the most. Upgraded from a swx core edge lite 39wh to an Anton Titon 68wh power base. Caught it on sale $150 off on Bhphoto.com few weeks back

[@robertm3951]

Thanks. The battery life seems like it is pretty easy to work arround

[@AnthonyCrouchPhotography]

Yes, I think so. Thanks for watching.

[@pedromoreno6836]

Great Video Many THanks... I would love to try the Anker battery on a guimbal like the RS2 Pro... with my Canon R5c

[@BensonIbe]

why will you need to swap out the battery while using the Anker PD? Does the R5c uses the battery while using the Anker PD simateanously?

[@AnthonyCrouchPhotography]

In truth, you will not need to most of the time if at all. It was just my attempt to point out that you could.. that the anker does run it without the battery. hypothetical situation, battery is low, need to keep filming, cant swap the batter out, plug up Anker PD, but oh wait Anker PD only has about 20-30 minutes of power left and you need to keep filming another 45 minutes, well no problem, once Anker is almost depleted, since camera is running on Anker, go ahead and swap that depleted battery out with fresh one. You switched from battery to anker back to battery all without stopping the film session. This is the gist of what I was trying to communicate, it is possible to do this hot swap if you ever need to for whatever reason. How often would you need to, probably never but you could... ;p my apologies if it confused you

[@BensonIbe]

@@AnthonyCrouchPhotography this was really helpful. Thanks alot, and no you didn't confuse me.

[@markcameron2459]

amazon has many 1 star rating for that ankar power bank dying and some refusing to replace them if not bought directly from them, pity as it looks like a great solution . the IndiPRO Tools D-Tap to LP-E6 Dummy Battery Cable says 2A on B and H but 3A is needed for R5c according to canons R5c cable compared to 2A for R5

[@AnthonyCrouchPhotography]

Anker battery working great for me. See following video on dummy battery. kzbin.info/www/bejne/npe3lYBrhLF9brc

[@Bassmunchkin1]

Hi and good evening Anthony. I have this power bank and it works brilliantly for charging my iPhone and air pods, but I'm using it to try and charge my canon R10 that I just purchased 3 weeks ago, whilst out shooting. I can charge my R10 if I plug the USB "C" straight into the mains with the light staying on green and turning off once the battery is charged. BUT if I connect the USB "C" to the R10 from the Anker, no light comes on and it doesn't charge as I found out because the battery only lasted 35 minutes when out shooting. I am turning the camera off when charging as well as also leaving it on just to test both, but it makes no difference. I've now got 2 spare genuine Canon batteries and I've tested the Anker to charge them both up as well but no luck, but they charged in the camera when connected to a mains outlet. Any suggestions as to why the Anker is not charging the batteries in the R10 would be much appreciated. Do I need a special rated USB "C" cable like a 3.0. Many thanks in advance Anthony for any help you can give.

[@AnthonyCrouchPhotography]

Do you have the exact version Anker? If not compare the two. Mine came with a faster charger plug and USB-C cable. If yours did not and then you may need a better cable. This one looks heavy duty, very thick, not sure what it is rated. The link in the video description above should take you to the exact kit I bought and maybe have more details on the cable. Probably not much help but best wishes.

[@Bassmunchkin1]

@@AnthonyCrouchPhotography many thanks for your reply, I never received a cable and I’m thinking that the cable is my answer. I’ve ordered the same one so hopefully that will help. I will admit that the Anker is really well built and feels like it will outlast me,!that’s for sure, so I feel that my issue is definitely not the gadget but probably is the cable 100 percent. Thanks again and much appreciated, Terry

[@martinmazza4370]

Hi, thanks for the video. What about reocrding in 8k 60FPS RAW mode using Anker PowerCore+?

[@AnthonyCrouchPhotography]

It will work

[@anthony25013896]

Hi Tony, I just my R5C and your video really helps. now i wanted ask you where can I get that port protector you're using or what ever it's called lol, since I don't know the specific name I can't find it . thanks

[@AnthonyCrouchPhotography]

Hi Anthony, thanks for watching. The protector I use is the Canon one that comes with the camera. I wanted to mention that I will be putting a video out soon talking about where I ended up and what I now use the most for a power solution. I use the power base the most. I rarely use the Anker as it is much too bulky. I mainly now use the Core SWX PowerBase Edge Lite 49Wh. It gives me about 4.5 hrs at 24p. The Core SWX PowerBase Edge Link 70wh is nice too and will give about 6 hrs at 24p

[@bobbleczar]

What's the runtime with the Anker Powercore battery at 8K 60fps?

[@AnthonyCrouchPhotography]

8k60 . Did not test it but I would bet approx 5 hrs. There is big difference in power usage between 24fps and 60fps but not as much between 4k and 8k. Keep in mind the 4k is still recording a 8k signal and downsizing to 4k. I am only guessing.

[@deanjohnson6082]

Look...I didnt want to fuss. But it is ridiculous that you have power for 8K60 in the title and thats not even in the video. It absolutely could use more power than the 4k settings bc it will also be running the continuous autofocus on the camera. We all clicked on this for.....Power for 8k60 using USB.....and nothing.

[@AnthonyCrouchPhotography]

Both options will fully power 8k60, sorry that was clear to hundred plus people who thumbs upped and not you.