Injora 70MM Swamp Claw Tires!! New Favorite Combo?!

[@CapeCrawlers]

Timestamps First impressions: 0:37 Size comparisons: 3:20 On the build: 5:42 Indoor course runs: 7:39 Outdoor course runs: 11:11 Final thoughts: 14:14

[@domenicmaiani3795]

Hi Adam, Do you think the 70mm tires would work on the FX118 or should I go with something a bit smaller? Thanks, Dom

[@luiscolon8635]

What's your opinion this set up on the ripper v2.?

[@julianivanrc6502]

70mm… i’ve got 1/10 with 90mm this is geting closer and closer 😅. Nice video as allways

[@crystalwolfmoon2863]

im running the dj crawler 74mm on my daughters ripper.its mind blowing, the jump in crawling performance;its no competition with conventional rigs.ive been waiting for some big wheels, they could easily be bigger and work better still.im wondering what the bronco will look like if i enlarge the arches enough to fit them.probably portals would make more space but it would be sitting very high.i already cut the arches out to fit the injora 64mm it looks pretty gnarly.white body with whitewalls and silver wheels.keep up the good work.your product selection, precision and attention to detail is much appreciated. :0)

[@JohnyPatrick]

Wow these tires have transformed it to another level!!

[@CrossKeysCrawlers]

Stock axles with Treal +10mm extensions work ? Think they will rub ? On a Tarantula with 59mm injora shocks

[@tomsan39]

what servo do u use with Injora 70MM Swamp Claw Tires , I have a 7kg injora is that enough, super test and videos.

[@pixel_er]

4:19 12:09 что за деталь с надписью INJORA находится между поворотным кулаком и передним колесом?

[@AnyAssumptionBanter]

would love to see bigger tires with even less sidewall. there is so much these 1.18th and smaller rigs can squish the tire. there is so much tire displacement you can get so having even lower profile will not take away from that conformity. Wonder why manufacturers were going large sidewalls.. was it selling their inner foams or were they just mimicking full size off-roaders. weird. too bad can't fine rally tires/wheels that have offsets that would work on crawlers.

[@Thecrawlerhutt]

what an awesome video! making me contemplate buying them lol

[@justinluczak5611]

Buying these

[@axellness]

what hex extenders did you end up using? you mentioned theyw ere 6mm - injora brand?

[@CapeCrawlers]

They’re Meus racing

[@franktl3423]

Just started building my tarantula today. These wheels also were included in the order 😊 will fit metal axle’s, 7mm hex extenders, some brass parts and Furitek hardware with 3’rd party transmitter. Will take my time to build, fun too. I.m already looking forward for its first drive 🙏🏻 enjoy watching your channel, keep up the good work 👌🏼

[@bryanbenz9045]

Curious what the biggest set of tires that would work with the TRXM High Trail? Even with a bit of added trimming around the fenders? Thanks!!

[@seniorxj2931]

Epic Review Adam! You do know you MUST put 4ws on that tarantula now!!! 🙏🏼🙏🏼

[@MitchellBolognaniRC]

I'm absolutely in love with mine on the Tarantula build. However I'm about to build a warthog with straight axles and these might go on it for that extra clearance. 😎 Awesome Review Adam way better than mine. But I'm getting better

[@jonhowland4985]

Great video as always. Hope the new job is everything and more than described. You and your family deserve it! Thanks for finding the time to post your reviews and shorts, they are very much appreciated

[@CapeCrawlers]

Thank you! I’m still trying to get acclimated but it’s going good

[@Foxx_69]

Ordered a set. Just got the dj crawler pins and muds. Like you said, without some side wall extras they flex alot and wash out. 1.3 is perfect . T look like the ugly low pro setup we are seeing. Strechbolt will be running these.. why i built it the way i did!

[@iamnoone6607]

How do you think these would do on an EVO PRO? I have the brushed one with the fighter body. With the fender flares, I`m wondering if that would be an issue with a bigger tire. I`m looking for performance gains. I did swap the foams in the stock wheels for Injora yellow silicones. That helped some. I want more....

[@patrickpiche135]

Excelent description, I received mine 2 days ago and love them too. Djcrawler make 1.3 in gold or black and at 40oz then are amazing too. You need to chop a bit of the 68mm tire to fit but it works amazing 👍

[@466rudy6]

40g I hope.

[@jeffreyd5129]

I ordered a set of those along with the Injora Tarantula TRX4M chassis kit with black panels yesterday from Amazon. Very excited! Liked and subscribed! 😁

[@gammagonad1657]

I came REALLY close to getting these for my current Angry Sparrow build, but I just thought they were a bit much. I went with some better looking 1.0” Treal’s, with of course the 64mm Swamp Claws. Still waiting for the rest of my parts, so untested. Maybe I’ll pick up a set. The combo cost like half of what the Treal set cost, so why not

[@CodyMartinOutdoors]

Tried clicking your link for the 70mm tires and says "page not found". I also searched injoras website and cannot find these tires???

[@bassboomboing]

I love the 64mm Swamps, with my fave wheel - the Injora brass six-spoke -really easy to put together, and vent the best of any tyre, foam, beadlock combo I've run so far.

[@rcjoe406]

I have some 100mm rcfwd tires with 1.55 wheels maybe someone will make a hex adapter? 😮😅😅😊

[@crystalwolfmoon2863]

i had some of the meus 1.2 inch wheels.i ordered some of these 1.3 tyres im hoping they will fit.what do you think?

[@inlinetoice]

How would this be on a TRX4m high trail. I think it would be awesome to see a built TRX4m high trail. Awesome video, the tarantula is a beast keep up the good work.

[@CapeCrawlers]

I thought about trying them on the high trail. Still might for the heck of it. I think they’ll rub pretty severely though

[@chadpowell7564]

Me too. Gotta wait for a few of the aftermarket parts to catch up

[@chad4030]

There’s a warthog trx4m now you should check out

[@Bonitacreekrc2]

i was wondering if those 70mm tires would fit on an injora scx24 buggy kit with mofo nylon portals.64mm would be big enough, but these would be cheaper than buying separate lgrp tires and injora rims

[@torstenbeekmann6931]

Nice clip nice tires, and greetings from Germany

[@ICanDoItMyself]

I ordered a set this morning for a Warthog mini basher build. Wish I watched this video yesterday. I would've saved $15 on my order! Oops.

[@bigbrainadventures]

what servo are you running on the tarantula build

[@VS666]

damn these look bad ass!

[@chadpowell7564]

Itoo big? No way. Just ordered 74’s for my tarantula and 10mm extensions. Hope they clear. Awesome video

[@CG-px9qd]

My tires from Injora keep coming off the bead lock wheels (outer) in the front during crawls. Any tips?

[@CapeCrawlers]

Could be your mounting technique. I learned the hard way to slow down my installation and sometimes squeeze the tire around the bead while I tighten the screws

[@CG-px9qd]

@@CapeCrawlers Thx, I remounted them, took my time and got them running right. Great videos. Looking forward to getting some shocks & trying these tips out.

[@domenicmaiani3795]

Hi Adam, Do you think the 70mm tires would work on the FX118 or should I go with something a bit smaller? Thanks, Dom

[@CapeCrawlers]

I think they would be too big. You would also make the chassis sit very tall combined with the portal axles. I would recommend a smaller tire. I run ~63mm on mine and like the fit a lot

[@domenicmaiani3795]

Thanks for the feedback on the tires for a Fury Truck! My FX118 arrived today. It was supposed to be a Christmas present but I don't think I can let my wife put it back in the box! I've got a few tools and mods on a wishlist for my wife to choose from... I think I can wait for Christmas for those... maybe. 🤔 I was thinking about putting a set of Injoura 1" rims on it but there is very little space between the rims and portals, will 1" rims work w/o axle extensions? I feel bad asking a bunch of questions when I'm certain they have been covered in a video... I'll have to watch your videos on the Fury truck again. Thanks again for making time to reply! It is great to hear from someone with so much experience. Dom

[@andrewrichey7374]

Yeah awesome, performing great Yep I’m here watching Rig’s is looking awesome dude love the colors

[@YaelLorenzo]

Great video!! I love your "backyard" where you test it :D. I would consider doing a "drone view" of it to show the map and then reach the vehicle all in a single shot, like movies. What would you say if I try to install this into the SCX24 Power Wagon?!

[@Frankredline]

Very awsome

[@dylanherron3963]

Wow man, that little guy CRUSHED Mini-Moab

[@CapeCrawlers]

The tarantula is a beast!

[@dylanherron3963]

@@CapeCrawlers Recently upgraded to a 66T Horizon motor (super cheap, readily available at my local hobby store) and geared for crawling, I may have to see what these 64mm and higher tire sets are about! Love my black/red aluminum Injora wheels and Warblers!

[@RcoffroadNj]

Thanks for all info! I'm starting a Ripper build inspired by yours. I would love to see these on your Ripper with the portals.

[@Brad-kt8lw]

Question where did you get your gram scales from?

[@CapeCrawlers]

Powerhobby

[@bruceking2327]

Cool video. What is your thoughts putting these on an ax24 slayer build with a brushless motor

[@RobConant-qb7bi]

Try putting 5mm extended axles on your tarantula. I did that with my daughter's tarantula. Does great.

[@laggibricks]

I would imagine that portal hubs would make this even more of a performance beast!

[@seniorxj2931]

These NEED to be matched with X15 axles, brushless with 4WS!!!🔥🔥

[@jimkrug2586]

Some great looking tires and wheels for sure and performance looked to be excellent as well. I can see a set of these ending up on my Furitek Bettle in the very near future!!

[@Chrisvx220]

Any idea if these would go on a CR18P evo T hunter?

[@Brayrfd1192]

They look absolutely epic on that trx4m

[@burtashbrook1159]

Would love a set of just the tires with foam, no rims

[@thesaint3389]

Can the tires fit on a 1.0 wheel?

[@axellness]

what axles are you using on this build? i wonder if thee tire/wheel combo fits on stock axles

[@orangessmeel245]

You should try those on your AX24

[@jrfishes]

Those things are beastly!!

[@snorrevonflake]

Love mine, just ordered two more sets.

[@jcollazo05]

Could this fit with stock body on bronco Trx4m?

[@CapeCrawlers]

No, you’ll need some body trimming and/or shocks to lift it

[@AgeOrmstad]

Realy nice man 💪

[@codyson1348]

Do you think they would fit on the trx4m high trail

[@CapeCrawlers]

I think they would rub pretty hard, especially up front

[@RCCrawlerz209]

Are those the Injora extended axles I see?

[@CapeCrawlers]

No, not yet anyways. They’re Injora housings but stock length

[@RCCrawlerz209]

@@CapeCrawlers nice

[@beastbears1]

Love your content! I had a question on my trx4m defender. it seems like there is a sticky spot when the front wheels are turned and rotating. I put the slower gears in the rear axel and and put grease on both front and rear but when i put it back together it gave me this problem. Any suggestions? Love your content and appreciate any help.

[@CapeCrawlers]

Thanks! Is it binding on the front links? Some of the M’s have issues with that. You can try adding some hex extensions to see if that helps

[@beastbears1]

@@CapeCrawlers I actually got it figured out. it’s cause my end points were to far to the right and left causing it to jerk a little while accelerating and turning! Vids are awesome keep it up! thanks for the help!

[@whiteslick00]

must be sold out