"I'd rather have no trigger than a faux trigger" I felt the same way when I took mine apart. Brilliant phrasing 🤣
@jaredbaker54477 жыл бұрын
This video makes me want to go out and buy a bunch of dart zone blasters. They're all so cool
@baconlord90625 жыл бұрын
You mean adventure force lol
@hman61593 жыл бұрын
@@baconlord9062 Adventure force is a subline created by DartZone.
@Bossgaming601053 жыл бұрын
I know and I want that legend fire, I'll put a k26 in it and brass the cylinder and put in a better air seal. It might be hitting almost 200fps after that.
@DiabolicallyDevious3 жыл бұрын
This aged beautifully
@Bossgaming601053 жыл бұрын
Some of them are easy to mod too
@ShinKyuubi7 жыл бұрын
It seems like these Dart Zone blasters are better than NERF even stock, the off brands seem to be getting better and take mods better as well.
@donthecon7 жыл бұрын
ShinKyuubi the Magnum is like the cheapest and farthest shooting dart blaster you can get. I have two and they are beautiful
@slimebuck7 жыл бұрын
nerf is too afraid of getting sued
@alaeriia017 жыл бұрын
Something tells me Dart Zone was started by Nerf modders. Beefy mechanisms, slamfire capable of taking a K26, no air restrictors, and the new LED blaster they're coming out with has separate circuits for the LEDs and the flywheels! Also, yay for chainable belts.
@Alexplainow7 жыл бұрын
Actually Dart Zone just keep using older designs as plastic/resin/injection molding was quite as good back then and Nerf pretty much launch themselves to the front of it ~10 years ago with the Stampede; while Dart Zone (and BuzzBee) just not take the left turn that Nerf had after the failure of the Vortex line, which was dead on arrival as Nerf had no commitment to it unlike the rival line; but that is rather ominous to the rival line.
@spartan_ma7776 жыл бұрын
Weird, right?
@Terra_Stara7 жыл бұрын
legend fire master key... I like the sounds of that
@CaptainXavier7 жыл бұрын
It does have a lovely ring to it...
@Terra_Stara7 жыл бұрын
+Captain Xavier any ideas on how you would go about that because I was thinking of putting the prime underneath and connecting two on each side of a blaster because they are fairly cheap, sort of similar to walcom's hellsender (the double magnus blaster in case I got the integration name wrong)
@CaptainXavier7 жыл бұрын
Nope...no idea
@bobtehdog1457 жыл бұрын
Joshua sardinas just connect the front barrel to the bigger gun and allow the back to swivel down
@milesboeddinghaus75887 жыл бұрын
What I did was to cut out the plastic along the priming rod, and 3D print a piece that hooked onto it and primed at the top. I then cut off most the barrel so that the cylinder still stayed on and took of the handle
@Sbomb166 жыл бұрын
Just a heads up, regarding the tri-fire and its adventure force counterpart, the air restrictors can be removed by taking out 3 screws in the barrels, and taking off the back cap. They fall out easily, and is probably the easiest, and cheapest, blaster to upgrade. I use it as my backup blaster, and it performs much better than my old triad
@hereigoagain047 жыл бұрын
I love you! Thanks for the Magnum segment! This episode alone makes watching your entire catalogue worth the time. Thanks for all you do & your humor as you do it. I don't even care that this makes me sound all fanboy. You rock!
@CaptainXavier7 жыл бұрын
You are welcome! And thank you!
@homelee6657 жыл бұрын
Probably my favorite K26 episode yet. Glad to see this. Thanks for sharing.
@masterSageHarpuia7 жыл бұрын
I kind of want to see the front pump of the new quatro blast and put it on the magnum.
@B_Skizzle7 жыл бұрын
Oh my god yes, the Quatroshot's front grip is amazing. (I got one just yesterday.)
@nilessmith77197 жыл бұрын
That trifire becomes much easier to prime with a leather lanyard strung through it.
@CaptainXavier7 жыл бұрын
That is a much better idea than a keyring. Oh! Someone sent me a paracord key fob! That might work!
@rexcristallospada64967 жыл бұрын
The magnum super drum is my current secondary (modded of course), and I absolutely love it, but I'm for sure upgrading the spring now.
@Torchbuscus7 жыл бұрын
Rex Cristallo Spada CT- 3981 I'm curious as to how you holster that thing. Wasn't even aware that was reasonably possible.
@ziploc20006 жыл бұрын
The Magnum can take a k26, but I can't prime it easily with one. Worth a try, but I ended up putting back the stock spring. I did take off the silly arm thing and the flapper that stops you putting stuff down the barrel and into the drum.
@ethanzimski69866 жыл бұрын
I feel like you could flip the legendfire upside down to mount it to something turning it into a top prime reverse break where it breaks up instead of down
@joeleustice5 жыл бұрын
That Legendfire does paint up very nicely. I don't use mine, but it looks sweet hanging on the wall as a display item. After sanding and priming, I dry brushed the main body slowly... into a nice metal, then did a wood style of paint on the handle and pump grip thing. (Never take it outside kids.. or adults.)
@yodaskoda1177 жыл бұрын
Will you try making a 40 shot absolver out of a magnum cilinder?
@ow59297 жыл бұрын
OH MY GOD YES
@CaptainXavier7 жыл бұрын
I would need something like a pumpkin cannon to power it...but it would be fun.
@B_Skizzle7 жыл бұрын
Come on Cap, if anyone could do it, it would be you.
@brandongregory68696 жыл бұрын
Just picked up a magnum at goodwill for 5 dollars. Never even heard of it before but, damn this thing is fun.
@lochlannwatling34826 жыл бұрын
Turbo advance would be better for that :)
@dmdizzy7 жыл бұрын
Also, production goof!! When you bring up the 'After' stats on the Superdrum, the 'Before' stats are the ones from the Legendfire.
@CaptainXavier7 жыл бұрын
Dang it! I was so careful! Oh well. Thanks for pointing it out.
@KatAspen7 жыл бұрын
The Legendfire can be intergraded sideways with a bold-like bar mechanism attached to the priming handle. That way it can still reload.
@TheBuffaloPaladin7 жыл бұрын
*I WANT to see a forty round absolver.* push the limits of what's possible captain.
@donthecon7 жыл бұрын
I go to the Magnum almost a year ago and I put a 12kg nerfturf spring in it and used some epoxy putty to reinforce everything. consistently shoots almost 100 feet. it's amazing
@jamietus10127 жыл бұрын
i had a modified maverick, I put a night finder spring (or the n-strike version if I've got the names confused) but the metal rod snapped in 2 or 3 and it only catched half the time, but it hit like a beast
@slimebuck7 жыл бұрын
seeing the quality of these new "off" brands it makes me really question if nerf is still at the top... like nerf seems to not care anymore like they did in the early 2000's
@CaptainXavier7 жыл бұрын
Nerf does seem to be slipping. I suspect part of it is running out of good ideas. At the same time their competitors are REALLY upping their game lately. BuzzBee plastic is still cheap but as a result so are their blasters and their designs are vastly superior to many Nerf blasters at this point. DartZone has also surprised everyone with the stock power of their blasters. Competition is good! It breeds innovation! Nerf will have to step up their game and I look forward to the results!
@slimebuck7 жыл бұрын
I love nerf, but I haven't wanted to ever buy anything new from them (well maybe the regulator... but im holding out) for over 5 years. I wished nerf made their accessories easier to get. Like stocks, barrels, masterkeys, stuff from regulators. went to the store one time to buy a stock and barrel kit and it was over $40. for a couple of peice of plastic and NO BLASTER??? yeah no. I went home and looked online for someone selling nerf stuff, for $40 I got :- Hyperfire , that big blue starwars special one (came with the barrel, stock and scope!), the Recon Mk 2, a rampage, a rhino fire and a centurion. yeah, screw your brand new prices nerf
@karisasani70067 жыл бұрын
Which probably explains why they finally made a blaster that has select fire
@deekswap6953 жыл бұрын
@@slimebuck oh boy do I have news for you
@TheREALwymario6 жыл бұрын
I find it hilarious that the Legendfire's internals are green, too. Happy St. Patty's Day (in 2018).
@penitentparadox7 жыл бұрын
Hey Captain Xavier, A fun thing I did with my Legend Fire was putting a Sharpfire stock on the back for stability, you should totaly try it if you ever buy a new one.
@jeffreycarman21853 жыл бұрын
I love the magnum super drum!
@beingthatguy82987 жыл бұрын
Now that i see the magnum drum, and since walcom gave you a fearless fire, i was wondering, would it be possible to replace the fearless fire's puny 20ish dart drum and replace it with the magnums 40 round drum?
@CaptainXavier7 жыл бұрын
We have spaceships...so yes, obviously it is possible. Easily? With the tools and skills I have. No.
@alaeriia017 жыл бұрын
You could have the LegendFire break backwards (the bit with the plunger tube goes down instead of the barrel). It might take some adjusting of the break switch, but it should be possible. Protip: You can ditch the wrist-rest on the Magnum and flip its stalk around to make a nifty hand guard. Also, it looks like you have a removable Magnum drum; it requires an Allen wrench (shove it into the hole in the back).
@jacobelgan51966 жыл бұрын
I'm planning on turning the magnum into an auto springer and this info was very useful for me
@rabadabadoo4917 жыл бұрын
loving the new included numbers😊
@gamerguy4257 жыл бұрын
the little triad blaster I forgot the name of has a very unreliable rotation mech (at least the one walcolm had was). you could manually rotate it but then you might as well use a tri blast
@jordanhaney6577 жыл бұрын
Oh Captain my captain, have you considered making a 2-shot absolver? For example, taking an 8 round cylinder and making it fire the 4 darts in the top, bottom, left and right position, and then have it be rotated to place the remaining 4 darts in these positions so it can immediately be fired again. No reload or switching necessary.
@brokenwings78024 жыл бұрын
My legendfire (completely stock) lasted me about a week, I shot it about for about 3 magazines and the connector for the barrel to the main assembly blew up and it just stopped working from then on no fixing it just gone
@stuartkseels7 жыл бұрын
That first blaster reminds me of a Dardick. Almost a Dardick, Liberator, Luger kind of vibe.
@zargax2457 жыл бұрын
I adore the long videos 😆😍
@penguinLol7 жыл бұрын
it would be silly to make a magnum superdrum absolver
@B_Skizzle7 жыл бұрын
Silly, sure. But amazing, HELL YES.
@chloe92us7 жыл бұрын
Is it just me or is this episode much better than the rest? O_o
@Sigmaprime3697 жыл бұрын
You could mount the legendfire sideways , so it could break to the side.
@alexnam12307 жыл бұрын
For HvZ The Magnum would be a beast because you can top off the drum as you are moving
@blackwolftucker28905 жыл бұрын
can the blitzfire also be... A REVOLVING SHOTGUN?!
@weeabird43357 жыл бұрын
The old Buzzbee Double-Shot? (I'm not sure of the actual name, I just know it's an old break-barrel double barreled shottie.)
@cwac52296 жыл бұрын
Captain. How much K26 did you safely fit into this? I'm cutting length with a friend of mine and dont wanna underutilize of put in too much.
@pigfish997 жыл бұрын
A possible name for your X-strike Superdrum: ThunderFist A possible name for a TEK-3 modded beyond all belief: Backlash
@jamesgiffin18307 жыл бұрын
any ideas on how to make the trigger still work on the superdrum? I don't know enough on the mechanism to attempt adjustment without probably ruining it.
@blastpressure7107 жыл бұрын
I realize this is an earlier video, but I am currently binge watching CITAK26, and I have a theory as to how to masterkey the legendfire: the pump is unnecessary, as I see it. It could be minimized by removing the barrel and pump, and putting a priming rod on the side of the plunger rod. At that point, you could take the grip off and epoxy the faux trigger's place and place it under a recon barrel or whatever you choose with the front of the cylinder being left open without the barrel, effectively leaving it as a front-loader which you could change out if desired. I realize I have done an atrocious job of describing this, but I really believe this would make for an effective underbarrel blaster.
@CaptainXavier7 жыл бұрын
+blastpressure710 you could also just mount it sideways.
@blastpressure7107 жыл бұрын
Captain Xavier true, but my idea is to keep it in the traditional orientation of am underbarrel launcher.
@bobertjohnson22647 жыл бұрын
So not only does the magnum super drum have slam fire and a 40 round turret, but it can take K26 and goes up to 130 fps. This is like a superblaster...
@tariqrahim2234 жыл бұрын
A bit late but I think you have a lemon blitzfire, other reviews say that it gets 73-80 fps stock.
@theswapmeetflea3 жыл бұрын
7:56 Recently, I found a dart zone legend fire , it was so fun to shoot until 1 day after it turned out to be a lemon, from what you say , it's exactly what mine is suffering from , I finally got the answer I was looking for , I saw many reviews before finding this video , now I'm afraid to buy another from where I got it because what if it's another lemon, I wish you could've fix it so that I could use that to fix mine , but , alas, 10$ down the drain.
@conallthewolf41036 жыл бұрын
*evil giggles* yes the magnum super drum can’t take a k26
@joshuathompson30027 жыл бұрын
Hello caption x you could cut down the barrel on the legend fire make it shorter and add a stock that could be fixed or modular
@THEBEAN64122 жыл бұрын
the legend fire would be the perfect boom stick
@itsfangs83627 жыл бұрын
Good to know!
@joeleustice7 жыл бұрын
The LegendFire is kinda weird, but the way it opens is cool, and looks GREAT with a paint job.
@crowbarbill75387 жыл бұрын
I think that you should try making a mix of the blitzstrike and legend fire. Then you could make a great revolver rifle with that cool lever cylinder loader. What do you think?
@CaptainXavier7 жыл бұрын
Merging the rotation mechs would be a beast...but possible. I think you should try it.
@calebsmith42557 жыл бұрын
Oh captain my captain... you should put a long stock on the legendfire to make it a mock sniper rifle
@AliceAXP6 жыл бұрын
All of these I plan to get now
@embroblier47297 жыл бұрын
Hey captain x you could make the legend fire side primed so you could remove the priming mech and shorten it to the start of the barrel
@Takowowo7 жыл бұрын
I asked and you delivered. Good stuff
@thetruewookie32197 жыл бұрын
i know what i must do now thanks cap!
@TheNoobmaster987 жыл бұрын
I wonder how turning a legend Fire into a shoulder cannon would go, I mean even if it wasn't that good functionally having that huge rifle on your shoulder would look cool as heck
@Kermomancer7 жыл бұрын
For the sake of making a Legend Fire masterkey, why not secure the front of the blaster and have it open and load from the back? Less plastic to get in the way of opening and a bit more practical with a rear reload.
@CaptainXavier7 жыл бұрын
Very true. You should do that and send me pictures. :P
@Kermomancer7 жыл бұрын
If I ever learn how to integrate things, I'll be sure to do so. So far, the most I've done is put Tek 6 and Tek 10 springs in things.
@dairylawnmax8797 жыл бұрын
You going to put a pump grip on the magnum?
@djwubzee7 жыл бұрын
Isn't the little tri-revolver with k26 an nerf compatible m6 handcannon?
@aayush76457 жыл бұрын
Add a key ring to the bottom of the 3 shot pistol.
@ModSquad7 жыл бұрын
Nice paracord bracelet!!!
@ytho35577 жыл бұрын
I tried putting a k26 in a magnum superdrum and ended up having to take the catch spring out of my other one and use it to double up the catch because it wasn't strong enough.
@CaptainXavier7 жыл бұрын
Yeah, I think I need to do this in mine now too. It caught for a while but now won't.
@scarlettbandit28037 жыл бұрын
What if you mounted a legendfire as an undermount sideways? I get taking it apart again would be rather tricky, but, would it be practical enough to work?
@CaptainXavier7 жыл бұрын
I don't think this would work well. However, you could also just forget the whole breaking action and reload it like a normal non-breaking revolver.
@scarlettbandit28037 жыл бұрын
True, but I am a big fan of the break action style. Tempted to make a loadout around one.
@neoseeker71607 жыл бұрын
Captain, be looking for a legend fire in a a box soon, because i am going to send u one😁
@CaptainXavier7 жыл бұрын
Thanks!
@jacobmperry7 жыл бұрын
try and make the legendfire use a trigger
@Snasedshiz2 жыл бұрын
I feel like the legendfire will be an excellent masterkey
@andrewpickering37056 жыл бұрын
Hey Cap. For the legend Fire master key what would you think would be the best way to mount. My wife likes her demolisher but she did not like the hamp.i trimmed the hamp off. She saw this video and was wanting me to do this for her. We went to local Wal-Mart and found the lengendfire on clearance for 3 dallors.i bought all 6 of them they had figured would be great for our local kids wars for our loaners. She loves the idea of the master key any thoughts. I also found out that the 12 kg retaliator worker spring works great the Legendfire but it makes the plastic warp. Sorry if this is so long. Needing help thanks
@andrewpickering37056 жыл бұрын
Also cap have you gotten your self another legend fire. Going try and send you the deadpool Blasters along with the A legend Fire if you are needing one.
@loellejordan42307 жыл бұрын
AyeAye Captain!!!
@owenkennedy32157 жыл бұрын
Can the Rapid Fire AS-20 take a K26?
@JamesWhite-hg8yg7 жыл бұрын
Cool...I need to mod mine!!
@ottomaticdash7 жыл бұрын
I like trains. There should be more trains
@Burnout_Kustoms2 жыл бұрын
Question: what’s the length of the spring you used for the magnum and will I have to upgrade the catch spring
@CaptainXavier2 жыл бұрын
No idea, and no.
@Burnout_Kustoms2 жыл бұрын
@@CaptainXavier alright then thanks
@jessenunez23067 жыл бұрын
Do you need to rewire your blaster if you are planning on using imrs like 2 of them
@CaptainXavier7 жыл бұрын
No. Stock wires and motors can take 2 IMRs just fine. 3 will eventually burn them out. $...don't do it...
@BKFS-ls9by5 жыл бұрын
Not sure if anyone will reply since this is old, but will the magnum internals hold up with the k26 over time? I’d like to put one in but I want to know if it’s gonna hold up
@CaptainXavier5 жыл бұрын
I doubt it.
@CaptainXavier5 жыл бұрын
And it makes the prime so heavy it is not worth it.
@ctgslayer7 жыл бұрын
Hey have you ever thought of making a Nite-Mav out of that Blitzefire revolver? I think I'm gonna try that soon.
@benlam4197 жыл бұрын
How hard would it be to add a trigger system to the legendfire? Cause having a trigger on the legendfire would make it so much better.
@CaptainXavier7 жыл бұрын
Very. Not worth the effort.
@benlam4197 жыл бұрын
That's too bad. I really like the shell and pump action. Just really needs a working trigger
@parkerjohnson40917 жыл бұрын
Are you going to buy the blaster by them coming out that shoots rival balls? I know drac has one.
@CaptainXavier7 жыл бұрын
Probably not.
@wilmclock65977 жыл бұрын
I AM SO HAPPY HOLY SHIT
@CaptainXavier7 жыл бұрын
:D
@dmdizzy7 жыл бұрын
So is it too complicated to be worth modding a trigger into the Legendfire? It's a sexy blaster but damned if I hate slamfire-only.
@CaptainXavier7 жыл бұрын
I would say, yes. Very much so.
@Sol6227 жыл бұрын
Does anyone know where I can get one of these springs? And what length the one used for the Magnum is? I really wanna stick one in my Magnum!
@CaptainXavier7 жыл бұрын
Solstice mallory-mccarty k26 can be gotten at McMaster-Carr's website (google it) and I cut it the same length as the stock spring.
@Sol6227 жыл бұрын
Thanks Cap! Awesome Vid, thanks for posting it!
@sampersonguy53374 жыл бұрын
Did you ever get the legend fire to work
@sorandom83967 жыл бұрын
Love your vids captain Xavier
@CaptainXavier7 жыл бұрын
Thanks!
@sorandom83967 жыл бұрын
Captain Xavier omg
@sorandom83967 жыл бұрын
Your in my top 3 favourite KZbinrs of all time
@sorandom83967 жыл бұрын
Thanks for replying
@CaptainXavier7 жыл бұрын
Thanks for watching!
@bradchrisman41397 жыл бұрын
+CaptainXavier How do you determine the weight of a spring?
@CaptainXavier7 жыл бұрын
I use a bow scale
@friscobandito92707 жыл бұрын
Nice work! How many coils did you use for the magnum? When I tried I ran into major compression issues.
@CaptainXavier7 жыл бұрын
I'm not sure. It is the same length as the stock spring.
@rzrider6837 жыл бұрын
I just got the boomco double rushes, sent you a etsy message, but the old one accidentally got deleted. Sorry about that.
@beriorgar7 жыл бұрын
hey cap, i was wondering; you use kilo's for draw weight, (as anyone should) but you use imperial measurements for everything else. isn't it time to switch tp fully metric?
@CaptainXavier7 жыл бұрын
Certainly! Send me a Metric measuring tape and a metric Chrono and I will get right on that. ;P
@gairkarohncatarn45277 жыл бұрын
What happened to the stats on the magnum superdrum when the K26ed stats appeared?
@CaptainXavier7 жыл бұрын
Typo
@daedalus97317 жыл бұрын
Great video! I love this series. I'm working on an interesting integration with a magnum right now and, based on your results, ought to put a bit of K26 in it. It has been a few months now, but do you remember how long the piece you put in there was? The same length?
@CaptainXavier7 жыл бұрын
Neat!
@Alexplainow7 жыл бұрын
Snuck the whole way
@jomolettman92587 жыл бұрын
awesome i have a super drum...
@ianduncil44086 жыл бұрын
I don’t know if this was asked yet, too many comments to go through. Haha. But how long of a spring did you cut for the magnum?
@CaptainXavier6 жыл бұрын
I do not know exactly. Generally I go with the minimum amount that avoids spring rattle.
@rocker41447 жыл бұрын
Yeah sorry about that and thank you
@SofaPop.6 жыл бұрын
Can you make a nemesis shoot catch springs?
@CaptainXavier6 жыл бұрын
Of course.
@alex2345316 жыл бұрын
what spring did you use to upgrade the blitzfire
@CaptainXavier6 жыл бұрын
Random spring from the bin #135, I call him Steve.
@alex2345316 жыл бұрын
ill keep that name in mind thanks captain
@bigpoo13357 жыл бұрын
Hey Xavier. I was trying to acquire K26 to ship to Australia but McMaster don't ship here. I was wondering if there was a way I could do it through you (although shipping will be very high).
@RoryStarr7 жыл бұрын
Big Poo does out of Darts Etsy shop ship to you? He has k26.
@bigpoo13357 жыл бұрын
Rory Stevens I hope he does. His shipping price is pretty good
@kaio07777 жыл бұрын
Captain you must 3D print a part for the magnum and turn that super drum into shotgun prime blaster you must it needs it cause that would put it over the top plus show me it in video once u are done
@CaptainXavier7 жыл бұрын
Well...that would be hard given that I do not own a 3d printer...plus I don't think a 3d printed part would be sturdy enough. I do agree that it needs a pump...but I am thinking of something involving metal.
@kaio07777 жыл бұрын
Well I think it would work with the metal And stuff you usually do but u would need to reinforce the front to hold all that force
@endymion75857 жыл бұрын
A three shot.... revolver? God I want that
@TheCatpirate7 жыл бұрын
Sergeant Serendipity Check Dollar General. $10 for 3 of them.
@kyraptor25217 жыл бұрын
Captian i think it would be a cool mod to make the legend fire use a trigger and a lever action prime with a integrated stock
@RadarNocturn7 жыл бұрын
Captain Xavier, you don't need to put tape or anything on the rod for the Magnum Superdrum's drum. You have the newer one so you just need to poke an allen wrench through the hole in the blaster that goes into the rod and it depresses the catch so it can be removed. They show it on their own video here: dartzoneblasters.com/magnum-drum-install/