NFStrike.com - RapideStrike and Stryfe - Upgrade Kits

Links!
Stryfe Kit:
www.nfstrike.c...
Rapidstrike Kit:
www.nfstrike.c...
Selectfire Kit video:
• White Stryfe Build - S...
Patreon for MakerSpace:
/ captainxaviernerf
Instagram:
CaptainXavierNerf
Reviews requests:
[e-mail]
General Questions:
[e-mail]
Facebook Page:
CaptainXavier
Mailing Address:
Chaylo Laurino
P.O. Box 148
Vader, Wa 98593
Theme song source: archive.org/de...
Alterations: spliced.
Time Lapse:
BenSound

[@MortenWill]

From what I have seen of the Rapidsstrike kit it is awesome. The Stryfe kit is similar to the one I have in a Stryfe somewhere. Neat kits both, but clearly more excited for the Rapidstrike kit

[@drkstl]

So, a couple of things with the rapistrike kit. It comes with three built in HUDs, you can swap it by clicking it 4 times. Clicking the wheel twice saves any changes parameters. You can change the voltage to your flywheels, so you can change your fps, same with the pusher voltage. I have designed a half-length pusher for the kit (working on getting a hybrid pusher to work, but it's....weird). The half length pushers found online won't work, as the pusher in the kit is thinner than the standard RS pusher. Also it all uses bearings in the pusher to make it super smooth.

[@brellcooper1337]

I was just getting ready to comment that the only problem with these kits is that they aren’t half dart compatible. Are the files available to print the half dart pusher you designed? Would love to see it in action and test it out.

[@darkwhite1259]

A hybrid pusher would be very much appreciated. Also, have you been able to figure out how much current this board can take? I want to use some high current flywheel motors.

[@drkstl]

@@darkwhite1259 so far I'm using a 1.5a 3s LiPo on my kit with a pair of Valkyrie motors, with no issues. I haven't tried anything larger because I don't have larger lipos.

[@darkwhite1259]

@@drkstl thanks. so far i've seen it being used with up to krakens. my motors draw a combined 90amps so i was just curious. good to know it runs fine on a 3s

[@skeemeastwood9075]

My pusher is incredibly weak. Worker 22s are shoot a dart maybe and reset shoot a dart maybe and reset. The only things that remotely work 51% or more are drums... and so that small piece w 2 holes isnt meant to be for short darts? Obviously not because its a few mm to long?

[@alexandermacphearson4379]

These kits are very cool. Definitely makes wiring the Rapidstrike easier

[@PhilZeGerman]

Okay I need this. As you know I have no clue about Nerf aside from frequently watching your videos, but neither do I nor have I ever owned a single blaster. However, I have finally managed to shed that exhausting (now ex-)job of mine and to finally get one with a life attached to it. In the new company I was pleasantly surprised when I was greeted by the head of business intelligence nonchalantly sneaking into the key account manager's office with his hands behind his back, the KAM seeing that and immediately DIVING behind his desk, fumbling in one of the lower drawers and then both pulled out their blasters and all hell broke lose 😄 My boss looked at me and said "oh yeah, I forgot to mention - we have this... "thing" going on here..." hahaha. I knew I was in the right place and of course you know what that means: time to Nerf up! And I think now I know what I'm getting! 😎

[@CaptainXavier]

Most excellent! Definitely build an absurd blaster and kick off an all-out arms race! :D

[@VirginiaRican]

I can't wait for a Spectrum kit

[@blankettoys8533]

Now I know you probably have a plan for that selector fire kit, but I would love to see you put that kit in a blue stryfe with a cosmetic kit so you can have a “love triangle” with your other 2 select fire kits.

[@CaptainXavier]

...you nasty...

[@jeffreycarman2185]

Awesome kits. These add another couple of options to think about for making a select fire blaster. Bangarang!

[@Maverick1375]

I got this coming for my nerf rapid strike!

[@scottbionicnerf8727]

I'm to see that development continues for 2 of greatest blasters ever. That definitely was a rather nerfy place to put the select fire.

[@troythetinkerer]

I want this to be my Rapidstrike Upgrade so bad. One day....one day.😏

[@brantcruickshank4100]

For anyone who installed the Rapidstrike kit, did you have trouble with extra darts being fired on semi or burst? I’m getting one extra dart and often two extras on semi and burst. Tried all the settings to correct. The only thing that has an effect was to drop the pusher voltage to minimum (5V). That got me mostly down to firing one dart on semi but still getting the occasional second dart sneaking out. A bit worse on burst. I’m running Valkyries on a 9.6V NIMH in it if curious.

[@Mark9978m]

nice👍

[@IkAAris521]

I wonder how easy it would be to convert the stryfe kit to half length……

[@scottbionicnerf8727]

I'm sure, but I think you hit 3 or 4 trees with a single dart. I count the trees as zombies or bad guys trying to steal your stuff.

[@CTBrix]

Cool👍

[@skeemeastwood9075]

It looks good on a stratohawk. Better than the rapidstrike imo.

[@brony251]

So I have a question for you captain. My girlfriend and I went to our local goodwill and I found a centurion and I want your opinion on how to upgrade the spring and how I should go about it. I've owned one and I always wanted it. Is there any way I'm able to make it more powerful

[@CaptainXavier]

Not that I am aware of. The internals are all solvent welded together so no one has ever developed a kit for it as far as I know.

[@Dark-jx2es]

We are waiting to see if they actually take care of us on our rapidstrikes...pushers were defunct then 1 just died

[@slagle92]

Ok I need this, but for a rayven!

[@CaptainXavier]

People have made selectfire Rayven kits but I am not aware of a commercially available one.

[@wyopoksfan]

What flywheel do you use? If im not wrong i dont think this kit comes with a new flywheel.

[@CaptainXavier]

They appear to be Containment Crew wheels.

[@wyopoksfan]

Sweet, besides the flywheels and this kit, is there anything else I'd need? This is my first mod I'm pretty lost

[@brandonkeller5912]

I wonder if it would be feasible (i.e., without resorting to a "sufficient amount of epoxy" or tech required to go to space) to fit the Rapidstrike kit into an Infinus.

[@CaptainXavier]

It would take immense amounts of epoxy and/or shell cutting. The kit is designed to socket into the Rapidstrike shell.

[@brandonkeller5912]

@@CaptainXavier damn. I was hoping that, between the triangle of dead space and the two blasters using the same pusher, it might be easier.

[@darkwhite1259]

Hows this kit treating you nowadays? I've seen some bad stuff about reliability

[@CaptainXavier]

I haven't touched it since this video. I had my doubts about reliability too. Seemed...a bit flimsy in places

[@darkwhite1259]

@@CaptainXavierany plans for a build with it or does it seem to prone to failure for you?

[@CaptainXavier]

@darkwhite1259 if I can upgrade the switches to something less prone to failure I will.

[@darkwhite1259]

@@CaptainXavier probably a good idea. Though i've used my kit with krakens, worker neos, and neocats and they've all lasted and the kit has worked fine if that means anything to you

[@lordshannonbussard9897]

Hay Capt. Could the full auto kit be paired with a half dart pusher in a stryfe ?

[@CaptainXavier]

Probably? You would probably have to make a custom one because it does not use a standard pusher.

[@linker-]

I dunno if you still wanted to know, but NF strike offers 3D print files for a short dart pusher if you need it! You'd be stuck printing it yourself or using a printing service though unfortunately.

[@Ykcdiamondrex]

Can you keep the rev trigger on the stryfe with this kit?

[@CaptainXavier]

Not with the parts available. I believe there is a jack for that purpose but the cable for it was not provided. I could be entirely wrong about that that though.

[@vincentdowns4104]

Would i be able to use krakens without the bypass? Also if i use stronger motors than that do i have to bypass it then?

[@CaptainXavier]

I have no idea. I followed the instructions. If you choose not to, that is on you.

[@vincentdowns4104]

@@CaptainXavier what motors did you use with your kit?

[@CaptainXavier]

@@vincentdowns4104 I believe I used Meishel 2.0s.

[@edsknife]

Wait, you mean the gamemode lets it be a VR controller?

[@CaptainXavier]

I think so? Like I said, I could not figure out how to get back into it. I need to do some more research and tinkering for the next video.

[@williamperry9760]

Are you able to control the speed of the flywheels?

[@CaptainXavier]

I believe so. I haven't played with it in a while.

[@williamperry9760]

@CaptainXavier I want to take this kit and add banned blasters motors,wheels and cage. I'm very excited to see what it can do.

[@darkwhite1259]

whats the maximum current i can draw through the rapidstrike board from the flywheel motors?

[@treymason530]

20a sadly but you can bypass the fuse and do 50a Ooh imagine hellcats on it deadly lol

[@darkwhite1259]

@@treymason530 just put neo hellcats in and it works nicely good idea

[@brix_max]

Is a charger for the battery-pack included?

[@CaptainXavier]

What battery pack? Both kits just use the blasters battery.

[@brix_max]

@@CaptainXavier i thought there was a battery pack included which just goes where the normal batteries would go (2:34 looked like it) i assumed the new motors needed more voltage or something

[@CaptainXavier]

@@brix_max no, no battery is included. It does require you to use a 3s LiPo, but it is not included.

[@WaltzActual]

mmmhm this is the good

[@dawnslack5515]

1:05 - Could you please link the body kits?

[@CaptainXavier]

I don't know if it is still available but if it is it should be here: www.etsy.com/shop/REARMORY

[@stuntmatt7124]

Very Shagadellic, but I'm guessing I won't be buying either of those kits, with bottle return money? And why on this flat Earth did they make them Red ?