Carbon Decal

Рет қаралды 12,568

Kenji's Plastic Models

Күн бұрын

Пікірлер: 26

@georgeclements2742 4 ай бұрын

Thank you again Kenji-san and best wishes.

@michaelbaykara2322 4 ай бұрын

Sensei you have hands of a skilled surgeon, i learned a lot on the decal skills- thank you.

@SimonMods 4 ай бұрын

Nice work, i always thought about a mini hydro dipping setup for carbon decals...i just havnt tried it yet.

@blairmarriott965 4 ай бұрын

that must be the next step in applying decals , i think it will be great , .......

@kenji-plasticmodels 4 ай бұрын

When I first saw hydro dipping, I thought it could be useful for model decals, but the materials are still expensive, so I can't afford it yet.😅

@brianmros4844 4 ай бұрын

Hi Kenji, these decals are so fiddly. I can't believe how nice they look after you finished them. Hydro dipping has been mentioned. Do you think it is possible for such small parts? Thank you for sharing Kenji, and have a great weekend.

@kenji-plasticmodels 4 ай бұрын

Hi Brian, thank you as always. When I first saw hydro dipping, I thought it could be used for model decals, as I'm sure many modelers do, but the materials are still too expensive for me to afford. I think it could be done with smaller parts as the water pressure is the same.

@mokichi555 4 ай бұрын

今回の動画ピントバッチリで気持ちよかったです😊

@kenji-plasticmodels 4 ай бұрын

作業によってピントが合いやすいときとそうでないときがありますね。ボディ等は向こう側とこっち側にパーツがあるので難しいかも。

@reneholstkristensen9429 4 ай бұрын

ja det er bar så godt at se det du laver laver og mand blive så inspirere at se det du laver .,. har du også lave fly .,. men glæde sig vær gran til et nyt fra dig 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎

@MKminiaturecarremodelingStudio 4 ай бұрын

いつも楽しく観させて頂いています。トミカサイズの改造にはデカールは使っていないので、とても参考になりました。Kenjiさんのテクニックが素晴らしいのだと思いますが、結構柔軟性が有りフィットするんですね！

@kenji-plasticmodels 4 ай бұрын

ありがとうございます😊

@MulczasPL 4 ай бұрын

if you are building a 98 Subaru, the dashboard should be matte gray (flocked), not black. look at the original pictures on the web, it's perfect time to fix it 👌

@kenji-plasticmodels 4 ай бұрын

Don't rush! I'm still in the middle of painting!

@kenji-plasticmodels 4 ай бұрын

nandemo-seisaku.com/wp-content/uploads/2024/07/_DSC4243eig.jpg

@rubencriviDT Ай бұрын

@@kenji-plasticmodelsIt looks amazing!!

@ВладимирПрохоров-ю8ж 4 ай бұрын

Kenji, your videos are just great, I also build models, it will take many years to reach your level. Are there any other platforms besides KZbin where you can watch your videos? Otherwise, KZbin may be closed soon.Sincerely from Russia

@kenji-plasticmodels 4 ай бұрын

Is KZbin going to be blocked? That would be a big problem, but unfortunately I only upload my videos to KZbin. I post videos on my website by embedding them on KZbin, but will those also become inaccessible? nandemo-seisaku.com

@nightcrow6965 4 ай бұрын

お疲れ様です。使われているカーボンデカールはタミヤのでしょうか？自分はこういった下地のディテールが複雑な部分には、ベルテクスのカーボンデカールを使っています。オフセット印刷の薄いデカールなので、シルクスクリーンしか貼ったことない人は厳しいと思いますが、下地のディテールを潰すことなく綺麗に貼れるので、オススメです。😊 作業途中のカットとかはまず出来ないので、マステでしっかり型紙を作ってあげる必要がありますが…😅 機会があれば試してみてください。

@kenji-plasticmodels 4 ай бұрын

お疲れさまです。カーボンデカールはタミヤのです。他にも違うメーカーのカーボンデカールや、フィニッシュシリーズのカーボンなどもあるのですが、今回はタミヤを使いました。気に入っているところは微妙な凹凸があるので仕上がりがリアルなところです。拡大写真を撮ると、凹凸が分かります。教えてくださったデカールは使ったことがないですが、手持ちのデカールが少なくなってきたら試して見ようかと思います😊

@eliesaliba1081 4 ай бұрын

Nice work. Kindly what tweezers are those?

@allen-n4nn 4 ай бұрын

You may need to add a time stamp as he uses four or more different ones. The scissors impress me and he shows them in one of his two tool videos but no tweezers in them. 😢

@kenji-plasticmodels 4 ай бұрын

If you would like, I can also introduce some tweezers.

@eliesaliba1081 4 ай бұрын

@kenji-plasticmodels What tweezer you used on 10:37 video timing?

@allen-n4nn 4 ай бұрын

Introducing which tweezers you use, and when you use them, would be great, Kenji! Thank you!

@kenji-plasticmodels 4 ай бұрын

@eliesaliba1081 This one. amzn.to/3Wms4Qq