MECHANICAL APTITUDE TEST QUESTIONS & ANSWERS for 2022! (PASS your TEST with 100% Correct Answers!)

[@CareerVidz]

GET MORE MECHANICAL TESTS >>> www.how2become.com/mechanical-comprehension-tests/ Watch this video next... kzbin.info/www/bejne/rKDaqK2HrZKZfbs

[@brendono4886]

ConEdison!

[@paulconnor6413]

Anti

[@paulconnor6413]

Clockwise

[@paulconnor6413]

B

[@paulconnor6413]

A

[@mzdee2265]

I wish u told us if we are right or wrong after the question instead of us commenting. I feel I'm wasting time watching this not knowing if I am understanding or not

[@Mando97_]

Yup I stopped watching because of this ruined the video

[@WaterFor3st]

Thanks. Im not gonna waste my time watching this

[@isaacdavid918]

Actually based on these types of questions these are questions that take part from the career ability placement survey. And in no circumstances is anyone actually allowed to tell the answers. Many schools use these tests but none are allowed to reveal any answers but only the results

[@ruben-Juarez]

The correct answers are acquired through knowledge of done not memory of past testing.

[@joen6209]

So true

[@Ishykai]

I think question 14 (if B is clockwise what other wheels will be anti-clockwise?) is messed up. If B is clockwise, C E G & H should all be as well. A F & D will move anti-clockwise which would be the correct answer to the question but it isn't listed as an answer. Either that or I need to study more for my test coming up lol.

[@jordanlongworth8906]

This one was confusing me, I think you are right

[@woketesaeedlevy6078]

Absolutely 💯

[@surazruhith9930]

B,c,g,h

[@KingAlmafi]

@@surazruhith9930 BCGH are turning clockwise not anticlockwise

[@tornerostipstricks4003]

A D F not in the choices ahaha

[@dallasormond4839]

just a quick question, why is there a timer for questions in this video if you just going to mark it Hours/Days/Weeks later? wouldnt an answer after the timer be more better for the viewers ?

[@stephennicholson5100]

how do you answer Q14 because its D F and A which isnt up there???

[@karon_vaughan]

lolllll right

[@briannabeauchamp7316]

2. B (the weight of the bricks in item B is evenly distributed/proportioned - therefore, it will be abled to handle the most weight on top of it compared to the others) 3. Wheel F will move clockwise, Wheel E will move anti/counter clockwise, Wheel D will move clockwise, Wheel C will move anticlockwise. (Bar A will also move to the Left). Q3 Answer = B (Wheel C turns Anticlockwise) Perspective switch: what if Bar A or B move to the RIGHT? If Bar A moves to the right, Wheel C will turn clockwise. Wheel D will turn anticlockwise, Wheel E will turn clockwise, Wheel F will turn counter or anticlockwise. (Bar B will also move to the right). Question 4: If Cog A turns Anticlockwise, which way will cog B turn? B: Anticlockwise. (Fast answer) Question 5: if cog E turns clockwise, which way will cog A turn? A: Clockwise (Fast answer) Question 6: B - the truck carrying the most weight would cause the most damage. (The heavier the weight the harder the impact - Trigger: "the heavier they are the harder they fall") Question 7: B: THE TRUCK IS MOVING IN REVERSE/BACKWARDS. ANSWER = B. Q7: Answer must be B - moving in reverse as the pendulum Bob is swinging towards the front. If it was moving forward, it would be swinging towards the back). (Inertia) The question does not mention any forces present. Question 8: A - Hammer with Pry Bar end. (Closest touch/flush with the wood, plus acts as a lever). Question 9: which tool is best for driving screws? D - Screwdriver Question 10: B: Load B is heavier as identified by the direction the lever is tilting. Question 11: C: Both are the same (as lever is level showing equal weight distribution on both sides). Question 12: Answer: A - Man A on the left or rear end of the pole is doing less work (no weighted object on his end) The answer is dependant on the weight distribution of the object. It is heavier on Man B's end so man A is doing less work. Question 13: C: D and F (in additon to A). Question 14: mistake in question, so here are what is clockwise or what is anticlockwise. Wheels rotating clockwise if B rotating clockwise = C, E, G, H. Wheels rotating anti-clockwise = D, F. (+A) This is simply because if Wheel B rotates clockwise, it moves the rope in a clockwise direction too. (I.e., downward in the right direction from B, thus driving Wheels C, E, G, and H in similar direction but wheels A, D and F are in opposite, which is anticlockwise). Question 15: B: G, E, C, and B are moving anti-clockwise. Wheels F, D, and A are moving clockwise. Question 16: F = (50 × 1) ÷ d2 = (50) ÷ 2 = 25kgs 25 kg must be placed on the other side to balance. Question 17: F = w × d1 ÷ d2 = 10kg × 2m ÷ d2 = 20kg ÷ 4m = 5kg. 5 KG must be placed on the other side to balance. Question 18: F = w × d1 ÷ d2 = 15kg × 3m ÷ 9m = 45kg ÷ 9m = 5kg 5kg must be placed on the beam to balance. Question 19: F = w × d1 ÷ ÷ d2 = 40kg × 10m ÷ 2m = 400kg ÷ 2m = 200kg 200kg must be placed on the beam to balance. Thanks so much for the video! Would appreciate an answer key with explanations from you, Rich, but thought my answers may help others if you are able to confirm my answers are correct. Also, millwrights!!!** will check your site to see if you have a soecific millwright video and most likely will purchase your book/PDF. Thank you ! Suscribing!

[@CareerVidz]

Thank you for your answers. All correct apart from Q14 and 15. Please would you subscribe to my channel? I'd appreciate your support. Thanks! Get free access to our new FREE Psychometric Testing Suite: www.how2become.com/free-psychometric-tests/

[@AugustineKar]

I got the same as you for all answers. Pretty sure he has made a mistake on question 14 & 15.

[@DaniboTheReckless]

I got the same for 15 Whats the right answer and 14 seems to have an error

[@DadaBeggs]

@@CareerVidzquestion 14 and 15 are right, you had just put the question wrong I believe. The question asks which of the other cogs are moving counter clockwise. All the answers are moving clockwise

[@kharismith3747]

Thank you so much

[@starfulgalaxy3008]

Electrician Apprentice applying for. Already had success with your interview skills. I need to brush up on those again too.

[@edwardgerrity7304]

Q2 B - Q4 ANTI CLOCKWISE - Q5 CLOCKWISE - Q7 B - Q8 A - Q9 D - Q11 C - Q14 D C,E,G, and H. -Q15 B. G,E,C, and B. - Q17 5KG - Q18. 5KG - Q19 200KG - APPLY FOR WEAPONS MANUFACTURING

[@CareerVidz]

Thank you for your answers. These are all correct. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks!

[@jonnyeverywhere2023]

Pin this comment! @careervids

[@taedar]

​@@CareerVidzshouldn't question 14 be A,D,F.

[@ewms8314]

E, B, B, B, A, B, B, A, D, B, C, A, C,14-should be ADF not option D , B, 25KG, 5kg, 5kg, 200kg

[@tglgaming7774]

@@CareerVidzthere is definitely something wrong with Q14 😂

[@Shagidelic]

For Q14, Q15, With pullies, remember this rule, those pullies lying outside the rope move in same direction. Same is true for all pullies inside the rope or belt.

[@Letty-dx3tk]

Hi, Richard. I have a question about q.7. In my opinion, both A and B are correct. The truck could accelerate toward direction b or decelerate toward direction a. Please help me with the issue. Thank you.

[@loganschlepp5903]

I’m in the U.S.A. and I’m going to become a firefighter Q1: E Q2: B Q3: B Q4: B Q5: A Q6: B Q7: B Q8: A Q9: D Q10: B Q11: C Q12: A Q13: C Q14: Wheel A, F and D rotate anti clockwise Q15: B Q16: 25kg Q17: 5kg Q18: 5kg Q19: 200kg

[@CareerVidz]

Thank you for your answers. These are all correct. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@jimmyyleee3333]

Thats ONLY significant IF youre a military Veteran WITH Duty Day AFFF sill in your sytem, Cpt Caucasianly Vague. js.

[@Vacancy94]

@@CareerVidz So you couldn't even put in the correct answer for Q14... Way to go genius.

[@jordans2983]

Great video. Seems to be many others in the comments including myself getting Q.14 = A,F,D please address it for sanity sake haha thanks

[@Skitzophrenix]

Look which way the rope is pulling and trace along the edge of the wheels. It's a little different than the gears

[@zetetimm]

Gong through this now. I think the answers listed are for which wheels move CLOCKWISE. You are correct with AFD moving Anti-Clockwise which leaves only those that are moving the opposite way left: CEGH

[@adrukova1407]

Thanks for the clarification I was confused too xD😆

[@truthbebold4009]

​@@zetetimmExactly! I noticed the way the question was worded, "which is the 'other' wheels..." That wording makes me think the questioner intended to ask which wheel's rotation is identical to B's.

[@truthbebold4009]

​@@SkitzophrenixIf B is rotating clockwise, C, E, G, H will also be rotating clockwise. In the previous question (13) A,D,F all rotated in the same direction and B,C,E,G,H all rotated in the same direction. That will never change for this arrangement. Agree?

[@desireeramirez-h8l]

Sweet! Great examples, testing for an interview at my dream job. Wish me luck!

[@mai3y]

thanks! your explanation are so understandable!

[@AD.TV_Mecha-Fresh]

I heard someone say that with gears, if it is an even number of gears the last driven gear will move in the opposite direction of the driver gear, if it is an odd number of gears, the last driven gear will move in the same direction of the driver gear.

[@JaniceLatta]

B

[@JaniceLatta]

B

[@JaniceLatta]

A

[@JaniceLatta]

A

[@JaniceLatta]

D

[@jakeyb1233]

Could u give me feedback on these questions and answers pls Q1-cannot say Q2-B Q3-anti clock Q4-anti clockwise Q5-clockwise Q6-B. Q7-A Q8-A Q9-D Q10-load b Q11-both same Q12-manA Q13-C Q14-B Q15-B Q16-25kg Q17-5kg Q18-5kg Q19-200kg I decided to write all answers down,if you can give me feedback would be appreciated

[@Unknown-ph2yw]

Thank you so much!

[@CareerVidz]

Thank you for your answers. Q7 and 14 are wrong but the others are correct. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks!

[@jillianharte5178]

Where can I get a study guide with explanations, please?​@CareerVidz

[@gouravkumarsinha9620]

Q.14 Ans. D

[@brentp.4090]

Thanks for the help. I will be checking out that link as well for sure

[@johnkennedy2060]

I took a chance, and tried this exam. I am a Electro-mechanic who is working toward a journeyist level. Please inform me of my score. Thank you. Answers to question: B B A B A D C C D C 5 5 200

[@omar_kristi]

Question 12 you've put C "doing the same amount of work" when it should be A. He is not having to carry the load unlike the other guy where it is nearer him.

[@dannyrivera5059]

Hi Richard! I am interested in becoming a pipe line controller. Thanks for any guidance you can provide.

[@kameroy5269]

What’s up did you ever become one?

[@rantgant8156]

How come for question 14, where the answer is clearly D, F, and A....that wasn't on the selection of possible answers???

[@CareerVidz]

Hi Rant, the correct answer for Q14 is indeed D. Can you please advise where the confusion is coming from? :)

[@jeeb]

I'm with you on this one Rant

[@brahimbelkadi6414]

@@CareerVidz i think you wrong D A F are anti clockwise . Which is not mentioned on the question 🤔

[@jayleesavage9780]

@@brahimbelkadi6414 yeah i saw that aswl maybe the question was worded wrongly? or its just a trick question?haha. Since the anti clockwise cogs were A, D and F and that wasn't a answer option, so I just chose the answer without the anti clockwise cogs which are B, C, E G and H but excluding B the answer should have C, E, G and H :) idk if I explained it clearly hmm but yeah

[@HughMadson]

Lol. Maybe take a closer look at your answer. @@CareerVidz

[@JohnVanderhoof-j4z]

Hi Richard! I am in the process of applying for Navy Officer Candidate School, and I am avidly watching your videos as part of my studying process. Thanks for any guidance you can give!

[@blazeschein3308]

Hello your video helped me out a lot. My test is over mechatronics and robotics. It’s like the RME & Ramsay test. The section I need help on is print reading and measurements if you could help me in anyway. Thanks.

[@CareerVidz]

Glad it helped!

[@TheAfricanEngineer]

Applying for an engineering graduate internship. Very helpful

[@jazlovedad]

E1)I chose E, because you never know how wide it is from behind, and we don't know the true weight of the squares. Q2)B, because It's most stable unlike A, C and D. Q3)B, I'm unsure how to explain it. Q4)B, anti-clockwise. Q5)I'm unsure. Q6)Truck A, because there is more space inside A, which is able to create force from the outside, to make a huge dent in the truck. While B has less force to take in, which will result in minimal damage.(It acts like a helium balloon) Q7)C, because the truck can move forward, and stop, but the ball could still be swinging. Vice-versa for B.

[@CareerVidz]

Thank you for your answers. These are all correct apart from Q7. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks!

[@realnametba2]

#2 --- B #3 --- B Counterclockwise #4 --- B Counterclockwise #5 --- A Clockwise #7 --- B Backwards #8 --- A #9 --- C #11 --- C Both the same #12 --- Man B is doing more work #15 --- B #17 --- 5 Kg #18 --- 5 Kg #19 --- 200 kg

[@CareerVidz]

Thank you for your answers. All correct apart from Q9 and 12. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@JoelYinger]

Skilled trades - Carpenter, Electrician, Mill Wright, Pipefitter, Heavy Equipment operator...

[@loulopez7649]

Thank you Rich, you're the best!

[@Voyager23B]

There is a mistake in Question 14. If Wheel B rotatates clockwise, wheel C must rotate clockwise. Am I losing my mind?

[@larrykeel2739]

Thank you sir for sharing this information with me and I hope it will help me get this job and it sure was helpful and I’m sure I will watch it again thank you

[@YejjavarapuVenu]

Answer is B, I think because every brick is placed upon each other more than the half of the below's brick placing.

[@henryakhilo]

Very very helpful tips...thank you!

[@Came-2Dance]

2.B 4.B 5.A 7.B 8.A 9.D 11.C 12.C 14.D 15.B 17.5kg 18.5kg 19.200kg. And I'm applying for a job that requires mixing of paint based on recipes of a sort.

[@ThomasBoyle-g2o]

I’m applying for a production job at Zeus, what they make there is IVs for hospital’s it contains a lot of moving wheels and troubleshooting

[@Kishore-to8wf]

Q14 is D,F,A are the anticlockwise wheels

[@CareerVidz]

Thank you for your answer which is correct.

[@kategough7917]

thank you!!!

[@CareerVidz]

You're welcome!

[@claytonayres7152]

Im am taking a Mechanical Aptitude test for a Process Operator role in the Oil and Gas Industry, I have been told the test is similar to the ACT workforce test but can not seem to find a practice test for it . if you could tag me with a link or a video you have to help study it would be appreciated.

[@sriyananda100]

I’m attending for Mechanical Aptitude Test on Skytrain attendant if you have any tips for that would be highly appreciate!!!

[@cordellwestall1758]

q2 B q3 B q4 b q5 a q6 b q7 b q8 a q9 d q10 b q11 c q12 a q13 c q14 d q15 b q17 5 kg q18 5kg q19 200kg Thanks for the video it really helped out alot gonna read that book and do some more practice!! Im doing a mechanical aptitude to get into an HVAC Apprenticeship program. Looking forward to hear back about how i did on this! TYIA!

[@CareerVidz]

Thank you for your answers. 100% correct. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks! Get free access to our new FREE Psychometric Testing Suite: www.how2become.com/free-psychometric-tests/

[@darrenfoleymusic3336]

For question 14, shouldn't the question be asking which other wheels are turning clockwise in order for "D" to be the correct answer?@@CareerVidz

[@АлександрКороль-в6ж]

@@darrenfoleymusic3336same question

[@АлександрКороль-в6ж]

As I see the explanation from the thirteenth question, it seems to me that 14 questions are not entirely clear. if B is clockwise then C, E, G and H should also go clockwise? But it turns out like a gear

[@АлександрКороль-в6ж]

it looks like you don't have the right answer but you're still thinking logically

[@cordellwestall1758]

Any suggestions on what to watch /study for the Math and Science portion of the second test ill be doing?

[@GMBH5]

Manufacturing Supervisor is the job I have a 2nd interview. It is at the company itself after a phone interview and I am being considered for this role as a direct hire from outside the company.

[@nikcue2542]

Mechanical Engineering career. Always best to prepare.

[@jacobhalvorsen7447]

I don't think there is a correct answer to question 14. If B rotates clockwise, then D, F, and A would rotate anti-clockwise but that's not an option.

[@connor13D]

Firefighter! Thank you 🙏

[@raphascreativelifecoaching1050]

Hello, and thanks for making this video! I am in the process of becoming a Fire Fighter and would love any tips or questions specifically related to Fire Fighting.

[@dianahackett8930]

Hi Richard, Below are my answers Q2.B Q3.B Q4.B Q5.B Q7.C Q8.A Q9.D Q11.Both Q12.B Q14.C Q15.C Q17. 5kg Q18. 5kg Q19 .8kg Aeronautical engineering aptitude test is what I’m preparing for.

[@CareerVidz]

Thank you for your answers. All correct apart from Q5, 7, 12, 14, 15 and 19.

[@leahmarie9895]

Fire service. If you could please send more related Q's . Thankyou

[@CareerVidz]

SURE www.how2become.com/online-firefighter-tests/

[@rgclan9780]

Would like an explanation of question 14 please. As if B is roatating clockwise then A,D and F would be the ones going anti clockwise so either the question is worded wrong or I’m a moron 😂

[@THANHWORKBUI]

Hi CareerVidz : I am applying to UA853 Fire prevention and protection. please can you give me some question and tips to practice

[@WellnessIntegrity]

Why isn't the answer for Q14 there? D is wrong, all four corners inside should all be rotating the same direction, isnt it? I need clarification please

[@justinwiseman8721]

Q14 answer is Pulley D, F & A no option to select.

[@amariscruz7041]

q14. a. Non of the above (D,F,A)

[@CareerVidz]

Sorry this is incorrect.

[@Mclightyear84]

I have a test coming up in a manufacturing company. We make plastic pellets into yarn. I do not know what kind of test they will be giving me please help?

[@okuchipeter1510]

Hi, I'm preparing for a mechanical maintenance manager psychometric test, any tips for preparation?

[@southlondon6759]

Hi, i am applying for the Trainee train driver job. Please can you help direct me on what material i need to buy from you? Many thanks.

[@CareerVidz]

Yes, of course, we have an excellent resource available at the following link: www.how2become.com/careers/train-driver/

[@southlondon6759]

Thank you for taking the time to reply@@CareerVidz

[@Duceflex]

Mechanic B L1-2 (Mechanic B L1-2, Steam Operations

[@FasikawBini]

Thanks be strong!!!!!

[@justinwiseman8721]

Q14 if it should read Clockwise for both instructions the answer will be D

[@brentp.4090]

2. B 3.B 4. B 5. A 6. B 7. A. 8. A 9. D 10. B 11. C 12. B. 13. C-The only way it made sense to me was to travel from A to H first 14. D- But traveling clock wise first i got DFA but that wasnt a choice so i went in reverse. 15. B 16. 25 17. 20 18. 45-before using the formula i took the factor of 3 and divided it into 9 then multiplied 3 by 15. The formula had the same result. 19. Man i got 200 first by multiplying 40 and 10 then dividing by 2. But using the formula i got 8. I am going to go back over that one

[@CareerVidz]

Thank you for your answers. All correct apart from Q7, 12, 17, 18 and 19. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@brentp.4090]

At the moment I'm out of work due to Zachry filing chapter 11. So can't really afford it right now

[@Asain231]

@careerVidz hey I’m applying for a city machinist job any test prep would help, I’m looking all over but can’t find any relative info. I have less than a week for the test date. Please help!!!!

[@CareerVidz]

Take a look at this next, it’ll help you even more: kzbin.info/www/bejne/bXS1mIaObrGLaacfeature=shared

[@LungileMaphumulo-r2f]

Hi. I have a bursary psychometric test coming up soon, and I'm an aspiring mechanical engineer. Can't find any sites with practice tests. Please help😢 Also, the video was great❤

[@lovecambodia2197]

Q2 B,Q4 B,Q5 A,Q7 C,Q8 A,Q9 D,Q11 C,Q12 A,Q14 D,Q15 B,Q17 5kg,Q18 5kg,Q19 200kg

[@CareerVidz]

Thank you for your answers. All correct apart from Q7, well done. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@raizerdeath]

Q1: E Q2: B Q3: B Q4: B Q5: A Q6: B Q7: B Q8: A Q9: D Q10: B Q11: C Q12: A Q13: C Q14: Wheel A, F and D rotate anti clockwise Q15: B Q16: 25kg Q17: 5kg Q18: 5kg Q19: 200kg

[@CareerVidz]

Thank you for your answers. 100% correct. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@denvercharlebois699]

I'm applying for plumbing. Any tips?

[@mibou265]

excuse me but mass is not equal to weight right ? so why are you using the word weight to describe the mass in your formulae F= (w . D) : D or Am I wrong

[@mawash0309]

The question to 14 is how I feel when I'm taking the test .

[@DM-pt5fz]

why would you not include the answers. how long would expect people for your reply?/

[@capitolparking]

I'm applying for the Delta airlines avionics bench technician. Mechanical applitude test being given.

[@2exiw]

Question 13 was wrong the pulley had a arrow. On it. Make all the turn in the same direction. It’s showing it in motion 😮

[@brentp.4090]

The job I'm going for is located inside of a live chemical plant. Man i want that position

[@DameGKisti]

I need USPS Exam 955 sample practice questions please?

[@toujayecarter9745]

I am applying for Amazon tech 3 job I have to get 44 on my test to get the job so I’m doing all My research so I can pass this test if you have any other help for me I’d appreciate taking the test tonight

[@Asifkhan-yf3wh]

So helpful

[@tonynasaofficial]

This is easy the hard part is spacial reasoning and the knowing the tools

[@morganjohn2989]

4=anticlockwise 5=clockwise

[@CareerVidz]

These are both correct

[@Magi-shroom]

Q1: E, Q2: B, Q3: B, Q4: B, Q5: A, Q6: B, Q7: B, Q8: A, Q9: D, Q10: B, Q11: C, Q12: A, Q13: C, Q14: D, Q15: B, Q16:, 25kg, Q17: 20kg, Q18: 45kg, Q19: 8kg. I really really struggled with Q14 because i couldn't wrap me head around what would be going anti-clockwise if B was going clockwise, the answers were really throwing me off and confusing me but i came to the conclusion that the answer is A because if D, A, and F, were going anti-clockwise then all of the others would be going clockwise which gave me my answer of A. I am still very uncertain of my answer though. Also, I'm applying for Survival Equipment Technician in the navy

[@CareerVidz]

Thank you for your answers. All correct apart from Q14, 17, 18 and 19. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@DanielTheGreat10]

For Q7 if you have a truck with tools in the truck of the bed you would understand the question lol bcus when i go in reverse all my tools go towards the front of the truck

[@JDog1997]

q2: B q4: clockwise q5 clockwise q7: b q8: b q9: d q11: c q12: a q14: d q15: e q17: 5 q18: 5 q19: 200

[@CareerVidz]

Thank you for your answers. All correct apart from Q4, 8 and 15. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks! Get free access to our new FREE Psychometric Testing Suite: www.how2become.com/free-psychometric-tests/

[@justinwiseman8721]

Q4 answer is Anti-Clockwise

[@Stinkspot]

I'm applying for the Elevator Industry.

[@IsaacSharp-r4m]

Question 2-B

[@CareerVidz]

Thank you for your answer. This is correct. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@amrtorky9454]

Q14..what is the answer please ?

[@DamienThorn13]

14 has no answer as the Anti Clockwise ones are A D and F but theres no choice for that

[@CR-Z24]

I applied for Maintenance technician and now I gotta take a test and testing is 1 hour

[@warriorno1292]

Q 2 - B, Q4 - B, Q5 - A, Q7 - B, Q8 - A, Q9 - D, Q11 - C, Q12 - A, Q14 - Written incorrectly?, Q15 - B, Q17 - 5kg, Q18 - 5kg, Q19 - 200kg

[@CareerVidz]

Thank you for your answers. These are 100% correct. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks! Get free access to our new FREE Psychometric Testing Suite: www.how2become.com/free-psychometric-tests/

[@roominagolshan]

Q7> B Q8> A Q9> D Q10> B Q11> C Q12> A Q17> 5Kg Q18> 5kg Q19> 200kg

[@CareerVidz]

Thank you for your answers. These are all correct. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@williamhager9418]

Applying for a industrial mechanics job

[@lorenzocater7930]

im trying to make the welders union sir

[@SuperMusicman38]

Applying for a welding job at a shipyard.

[@datniyapravin8869]

Q-19 ans is 8kg Is that right or wrong?

[@SPACEiQ1746]

Heavy equipment operator aptitude test, I'd like material on that please, thank you

[@justinwiseman8721]

Q5 answer is Clockwise

[@briannabeauchamp7316]

Practicing for millwrights aptitude test for apprenticeship!

[@sanjeetnepal8648]

I am giving the test for production operator/supervior role

[@amrtorky9454]

Medical Director Psychometric Tests ...Please

[@IsaacSharp-r4m]

Q4-anticlockwise

[@CareerVidz]

This is correct.

[@garyhanes2892]

Q17 =5, Q18 = 5, Q19 =200

[@CareerVidz]

These are the correct answers

[@holganimymamvioka9148]

The answer for question 4 is clockwise

[@CareerVidz]

Sorry, this is incorrect

[@ithabelengsebilo7263]

Q19) 8 Q18) 5 Q17) 5 Q16) 25 Q15) B Q14) B Q12) A Q11) C Q10) D Q9) B Q7) A Q5) Clockwise Q4) Anticlockwise Q3) Anticlockwise Q2) B

[@CareerVidz]

Thank you for your answers. All correct apart from Q7, 14 and 19. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊

[@aarahiatenisoni681]

Q2 = B Q3 = B Q4 = B Q5 = A Q6 = B Q7 = B Q8 = A Q9 = D Q10 = B Q11 = C Q12 = B Q13 = C Q14 = D Q15 = B Q16 = 25kg Q17 = 5kg Q18 = 45kg Q19 = 20kg

[@CareerVidz]

Thank you for your answers. All correct apart from Q12, 18 and 19. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks! Get free access to our new FREE Psychometric Testing Suite: www.how2become.com/free-psychometric-tests/

[@Wavy-v9u]

Going to be a steamfitter Q2. B Q4. B Q5. A Q7. B Q8. A Q9. D Q10. C Q12 A Q14. D Q15. B Q17. 10 Kilograms Q18. 22.5 kilograms Q19 200 kilograms

[@CareerVidz]

Thank you for your answers. All correct apart from question 17 and 18. Well done. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊