Carp Pilot Pro: Mapping tutorial

[@ricardozamorra7506]

Hello, I have a question. How can I deactivate automatic map orientation in the Carp Pilot Pro app? So that I'm not always zoomed in when I'm at the lake. Thank you and best regards😊

[@TheCarpPilot]

At the moment this zoom runs at app start to home you in where you most likely sit down to enjoy the hobby: Where you are, or where the mission/boat is when connected. And right now there is no setting made available to disable that. Such a setting can obviously be made. To quickly find another area you may of course already now use two-fingers on map to zoom in/out. Use the map search function to find whatever you want. Or select any depth map you made and instantly have the app zoom in on that. If I should make such an option to disable map zoom - what should Google Maps then look at? Europe at a given altitude, some km up in the air? Google maps actualy needs to look at "something"... If you have ideas for improvement you are welcome to joint the Carp Pilot Pro suppport group on Facebook. KZbin video comments are not a good "forum" to discuss ideas for app changes.

[@MKrEvolution]

This is an awesome feature, specially for us who use Deeper, THANK YOU! :)

[@TheCarpPilot]

Got one boat with a Deeper as well (a Chirp+) and also built some Chirp+ into boats for some friends. And I am happy to see that it works 🙂

[@D4vvE]

What formats Can you export 3d model as?

[@TheCarpPilot]

The depth map is formatted as a KMZ and can be used directly in Google Earh (as an example). Just use the built in file manager and share the file by (as an example) email to use it other places than within the app

[@polska_niegotowa]

właśnie dziś odebrałem chirp+ 2 :) będzie zabawa nad wodą :)

[@TheCarpPilot]

Enjoy!

[@sallysnail1795]

Brilliant ! Easy to follow instructions. This app is amazing. Will be trying it in france soon. Well done ..the best does get better. 👍👍👍👍👍

[@TheCarpPilot]

Thanks! Testers and my self have been using this ability for a while. And it is truly amazing to finally have the app I always wanted. The ability to get the map inside the Pro app without any additional tools needed. While Navionics is an amazing tool, having the depth map in a separate window and not directly inside the Pro app is a compromise. I have also been using Reefmaster for years, and it is truly a great tool. But it is a lot of work moving and importing logs, using Google Earth for shorelines and to export the result back to the app in the end. Now the maps just appear while using my boar, it is so much more efficient 🙂

[@sallysnail1795]

@@TheCarpPilot so i have no need to purchase the navionics apps as carp pilot pro has all the reqd features needed to map and save...brilliant 👍👍👍

[@Spyder_Tech_RTK]

Another fantastic intractable video. Great work 👍🏼

[@Saphir952]

Thank you so much Olav. it´s so nice thank you. thank you thank you

[@Vincethegamer-v2o]

Hi, I have an ND2 bait boat. It has a Vexilar SP200 Eco sounder installed, which has its own Wi-Fi signal. Is this supposed to be on the app? I really like the app. It's much better than the ND app, and I love the depth mapping options. If it's not supported, can it be added to the app? 🙏

[@Basteleddie]

Its so awesome!!!!! A very brilliant job, that you did, thanks a lot!!!!

[@zielonooki33]

Great job! I found the application by accident, but it gives me what I've been looking for a long time. I understand that I can use the app for my boat connected to Deeper Chirp 2+. I have a lot to think about now to do Autopilot. There is no iPhone version? Thanks

[@TheCarpPilot]

Sorry for the late reply. No iphone option, sorry. Deeper Chirp+ and 2+ are supported for sure.

[@duannehill7591]

Hi , is raymarine pro 5 supported) cheers

[@williwichtel5441]

Hello, i Use a deeper echo sounder, but i dont get the depth or connection. Can you please help?

[@TheCarpPilot]

I assume you use a supported Deeper model (Chirp +, Chirp + 2.0 or Pro+ 2.0). In that case: Connect to the Deeper with the Deeper app and set it in "mapping from shore". That's the ONLY mode where Deeper offer the NMEA interface. In addition, test OUTSIDE. The Deeper GPS is not the best, and if it cannot get a GPS fix it will also shut down it's NMEA interface and Carp Pilot Pro cannot receive any data at all. So please test using good conditions outside with a clear sky - away from buildings and other stuff that may obstruct the sky.

[@moritz2489]

I would like to synchronize / backup my mapped depthlogs via oneDrive on two devices , but I can't find the folders of the app in the Android system , can you tell me the path where the data is ?

[@TheCarpPilot]

Backup is a good idea. Also OK if you need to set up an additional device for the app. You will find the folders using the following: Internal storage: Android/data/org.carrpilot.pro/Files. Android sets hard privacy limits on these folders (they belong to the app and are restricted so other apps have problems). If, however, you connect the Android device to a computer you will find the device and can use the file manager (at least using Windows) without any issue. If you later have just a few new files (say a couple of depth logs), use the built in file manager + select the file + click the share button and then select OneDrive or whatever. The built in manager can do that one file at a time.

[@TheCarpPilot]

Decided you should get an easier way to do backups, it is a very good idea. So in the upcoming upgrade shortly available you can do it fast using the built in file explorer. When you enter a folder with one or more files a new zip folder icon will appear on the top. If you click this icon, the app will add all the files into a zip file, store this zip file in a new "backup" folder and finally trigger the share command. The final action brings up the list of sharing options available (like email, OneDrive and whatever apps you have installed on your device that can handle a file). Select the choice that fits you best and it is done :-) Will look into how to expand a zip file as well...

[@TheCarpPilot]

OK. The expanding part was easy. So in the next version you can zip and share your depthlogs to your OneDrive. Then share that zipped file from OneDrive to your other device, and then unzip it again. Fairly easy job now :-)

[@moritz2489]

@@TheCarpPilot 👍👍👍 super arbeit !

[@moritz2489]

@@TheCarpPilot If there was now a kind of "dinghy mode" for parallel mapping and waypoint storage of feedboat and dinghy with a compatible echo it would be perfect :D example: i use a se100 on the ftdi adapter directly into the tablet on the dinghy for the position and a simrad go for the echo . On the feed boat pixhawk and raymarine by default. Greetings

[@PeterBehr82]

Hi, i use the injector with the dragon fly pro, is there a ability to get the gps data from injector?

[@TheCarpPilot]

Yes it is. But be aware that while the injector is (or maybe was) an expensive device, it is not very good at what it does. I personally was amazed by the lack of quality in the GPS sentences tranmission. But seems the built in GPS may not be something to brag about either. The following report is from the Carp Pilot Pro user group on Facebook for a disappointed Injector user: "I've got a dragonfly with The Injector gps build into it (no autopilot). When live charting my baitboat keeps registrating points far away from the boat position." That said, this user may have put his injector into a very unfavorable spot inside his boat (like close to an ESC, high current battery wires). Install it like that and even a brand new GPS may struggle. You may be more satisfied should you build your own wifi GPS following the new 2023 video. And far less expensive than your injector as well, even with a GPS using the brand new M10 chip from uBlox. But the injector indeed works.

[@PeterBehr82]

@@TheCarpPilot thanks very much i use the co pro version, i was able to connect but the connection is low and yes it was 200 Eur and the accurancy is very bad. I have also a dt06 WiFi in my boat connected with mini pix i will try to setup it maybe its a better way using pixhawk gps

[@TheCarpPilot]

@@PeterBehr82 If you have an autopilot and a GPS then you should use that instead

[@moritz2489]

Gibt es eine Möglichkeit bei der shoreline Inseln auszublenden ? Tolle Arbeit!!!

[@TheCarpPilot]

Island support is planned. In the "create map" page you still see a 0 for the number of selected islands. The abilities developed for it did however not work as expected. So I disabled the screen to select island shorelines and disabled the dropdown choice in the draw shoreline screen as well (it is a dropdown, but no "island shoreline" available to select). Better to release this new Bathymetry abilities now than to await till after my vacation with everything. Even though I did not manage to get it to work right now, in the future I for sure will (it is not straight forward, but possible). So right now the answer is "no, but it will be possible in the future" 🙂

[@TheCarpPilot]

I can confirm that Islands (one or more) will be supported when using the editor in the upcoming version upgrade.

[@polska_niegotowa]

Hello. I have a Dell Latitiude 7390 laptop and I have android version 9 on it. Version 3 of the application worked without a problem. After updating to version 4, the application does not start. Only the initial graphics flash and the apk closes. Everything works fine on the phone. However, I would prefer to use the app on a larger screen, since so many new functions are introduced.

[@TheCarpPilot]

Well, yes. I do understand. I am trying to keep the app size under control and removed some support. Android devices are running like ever, but x86 is currently without support. I had to stop using emulator and test only with real tablets and phones as well. The mathematics libraries included are beasts, and app grew significantly in size, that's the reason. Let me do some more testing and see how it behaves with x86 included. Can't make any promises before I test. Also, I have almost a week vacation coming tomorrow. No coding, I promised my family (the past three months have been really busy creating the new version). So please have a little patience 😅

[@polska_niegotowa]

@@TheCarpPilot Of course I understand :) The application in my opinion is number 1 :) I do not use android emulators, I have it installed on my dell and it works like lightning. In addition, I have a touch screen there, which makes it very easy to use on the water :) I also have a family and I know what's going on, also take it easy. It will work on x86, it's great :) greetings and I wish you a rest :)

[@TheCarpPilot]

If you try bluestacks on you laptop then the app should work, got it confirmed by another highly capable Pro app user 🙂 Personally I own multiple Samsung tablets: Tab A 2019 (a little slow but with awesome wifi capabilities), a tab s6 lite (my favorite Android tablet) and a tab S7+ (which is absolutely fabulous but slightly big with its 12+ inch screen for fishing). Never had a need to use my laptops, really 😅

[@polska_niegotowa]

@@TheCarpPilot I understand, but I have android physically installed as the second system, I do not use emulators. Due to the fact that such a dell is practically the size of a tablet, sometimes I take it to the water, especially when you need to work remotely without losing leave at work :) In fact, it works on the emulator :) Maybe someday it will work on x86. Regards

[@patrickbarria4908]

hello next time i come to your house I was very close to you and in addition I use carp pilot pro did you pass in front of me around 3am? 😀great thank you for your excellent work bravo

[@achimregelein5001]

Thanks for creating. Sometimes handling is a bit of a mess, specially when there are already quite some data my Galaxy Tablet struggeled to add more Map Data in Realtime. Nevertheless it's a great App! Is there any chance, that I can view the maps I created on a desktop computer and even export an SVG or PNG from it?

[@TheCarpPilot]

The depth map is in a KMZ format and will instantly show using Google Earth and other mapping software. But here's the cool thing: You do not have to export anything at all: The KMZ is actually an archive format. Just like ZIP, only used for compressing KML files and additional map stuff. Just rename the file from "whatever.kmz" to "whatever.zip". Then extract all your files. And inside you will find a file called "depthmap.png". This you can view basically however you like!

[@achimregelein5001]

@@TheCarpPilot Awesome! That works perfectly! Any Chance to get around 100-150 Pixel of the map picture? That would make it easier to see spots on the shore :)

[@TheCarpPilot]

@@achimregelein5001 Not sure exactly what you mean with "100-150 pixels of the map picture". Like a miniature, somehow? I am all into good ideas, just need to understand what you are thinking about...

[@achimregelein5001]

When I export the depth Map, it shows only the depth map itself, without any areal around it. So if we could add some of the surrounding landscape, like it's shown on the app for example, I think that would be helpful for. I hope you understand what I mean :)

[@TheCarpPilot]

@@achimregelein5001 ok. That's clear. The area surrounding the water, which is actually the real map and not the depth map overlay. Which could serve as a mini offline map. Not a bad idea, actually. It is already now so that the depth map will show in the app even when you have no offline map available (you can use mapbox map for that). Adding a piece of real map surrounding it will for sure make it look prettier. I will give it some thought. Thanks.

[@mascot62110]

Superbe application ,bravo pour le développement ! J'explore actuellement mon nouvel achat (Premium ) J'ai réussi a intégrer les fichiers "csv" du Deeper chirp + et créer une carte bathymétrique ,c'est tout simplement génial ! j'ai déjà des missions crées sur Qgroundcontrol ,notamment des missions de sondage en mode automatique . Ces fichiers sont au format "plan " .Les fichiers Carp pilot sont au format "Text " . Comment les intégrer a l'application ? Je m'amuse comme un fou🤩

[@TheCarpPilot]

Sorry for overlooking this question. I believe that QGC uses some kind of json format for their "plan" file. While the Carp Pilot Pro uses the old "plain text" with values separated by tab like in Mission Planner. I do not have a straight forward way to tell you how to convert this. Easier to just draw your surveys from scratch. Since this question the Carp Pilot Pro also has a new waypoint database with a supporting database viewer, including support for text based icons and graphical indication of catches

[@mascot62110]

@@TheCarpPilot Pas de soucis ! j'ai changé de plan d'eau et je sais que tu as beaucoup de travail avec l'application pour son développement et cela reste facile de refaire les missions !😉

[@OpJachtNaarKarper]

Super.... thx

[@alfredo36289]

Lekker bezig