Carson Reflex Stick 2 & Tamiya MFC03 Instructions.

Please like, share And subscribe

[@paulspencer2331]

Thanks again, just a flick of a switch 👍 I was going to turn axles around but knew I had installed them correctly 👍 should you wish to drive a real lorry, I can do a good deal for you at my hgv driving school. I may be able to demonstrate from an above angle the reverse exercise to our customers once I purchase a trailer to add to for my Tamiya truck

[@ianyams]

You're welcome, glad I could help. Where are you based?

[@paulspencer2331]

We are based in Liverpool L9. We offer Hgvtraining in both categories of lorry

[@ianyams]

I'm only over in Wallasey.

[@carlowles9852]

Hi I have 2 of these transmitter and receiver I no the button/ switches at top of transmitter are channels 5 and 6 on receiver but which is which I can't find this info anywhere Thanks

[@ianyams]

Hi, plug some servos into every port on your receiver and flick each switch to see what switch controls each servo.

[@paulspencer2331]

Thanks for your video on the setup. Any idea on my issue, when I steer to the right the wheels actually turn left? Hope you can help

[@ianyams]

Thanks. Reverse the steering servo on the transmitter.

[@paulspencer2331]

@@ianyams Thank you Ianyams {I have put the servo upside down now and it works correctly now} Thank you so much.

[@ianyams]

No problem, glad I could help 👍

[@gourav925]

Please tell me which transmiter should be installed for RCExtra vator, how can the left right and 5 Hydrolic control the extracvator back and forth with 2 Joy stick only

[@ianyams]

Hi, you need a transmitter and receiver that has 10 channels for an excavator.

[@gourav925]

@@ianyams yes

[@gourav925]

Best and cheep price transmitter

[@paulspencer2331]

I have another issue. I am sure I put axles on correctly (rear axle diff to the right) (middle axle diff to left). However when I push the left lever on control forwards my truck Reverses and vica versa . Any ideas ? Could I simply swap the green and yellow wire into motor ? Or could this damage it 🥴

[@ianyams]

Again reverse the servo switch on the back of the transmitter that corresponds to the throttle stick.

[@paulspencer2331]

@@ianyams do you mean on the Carson control unit, to turn that lever ?

[@ianyams]

Yes it's a little slide switch on the back, they reverse the servo corresponding to the sticks.

[@littlenemo14]

Hi mate. I wonder if you could tell me why, occasionally my Actros Mercedes’ just runs off and I don’t seem to be able to stop it. Any ideas please. I guess I’m not too far from where you are btw.

[@ianyams]

Hi Steve, I've never heard of the MFC unit's malfunction on the throttle before. Does it run off without any throttle input when standing still?

[@littlenemo14]

@@ianyams Hi. Thanks for the quick reply. No it only seems to do it occasionally. I’ll persevere just in case it’s me as I’m a real beginner with RC trucks. Whether or not I panic when it’s moving I don’t know, god I’m pathetic lol. I enjoyed your video about the Carson. It taught me a lot. Thanks again.

[@ianyams]

Thanks. Ok mate, you're welcome. Enjoy.

[@nikko7507]

Mate I have a Carson Reflex Stick 3.1 - I also have a five channel Carson Reflex Pro 3 Reciever . However it doesn’t seem to be linking up , ESC is green and reciever flashing red . Even when I press the set buttons nothing changes colour! And these are new ? Is because it’s a 5 channel reciever as my other Carson was a 4 ????

[@ianyams]

Hi, are you trying to hook it up to a MFC?

[@nikko7507]

It’s sorted now mate thanks . I binded it , so I can use the one control on both Carson recievers , I have to cars with Carson recievers hornet & nova fox

[@ianyams]

Nice one. I was going to say make sure they are binded. 👍

[@GyuHobbyRC]

The video is so cool. friend Become a thriving channel. Let's get along 친하게 지내요. 😉👍😉👍😉

[@ianyams]

Thank you 👍

[@gourav925]

@@ianyams Please tell me which transmiter should be installed for RCExtra vator, how can the left right and 5 Hydrolic control the extracvator back and forth with 2 Joy stick only

[@philjanko1]

𝟞𝟘𝟘𝕥𝕙 𝕤𝕦𝕓!

[@ianyams]

Thanks Phil 😊

[@paulspencer2331]

We are Learn Our Way hgv training (Based in Liverpool L9 7AT)

[@ianyams]

Oh right, I'm based in Wallasey.

[@iPROxTOILETROLLZz]

Hi could you demonstrate how are you use the fifth wheel on this controller with the Hydraulic legs

[@ianyams]

Hi, sorry I don't have the truck anymore. It didn't have the remote 5th wheel on it, just the manual.

[@iPROxTOILETROLLZz]

Okay thank you anyway good video keep it up

[@ianyams]

@@iPROxTOILETROLLZz you’re welcome. Thanks very much 👍

[@ianking6251]

Hi David did you ever manager to get to work out the fifth wheel on this controller as I am struggling with that to?

[@ianyams]

David and Ian, I think I have sussed it, bottom left trim fully left and throttle stick click to the left once, the hazard warning should flash once, then your right stick up and down controls the 5th wheel servo . To exit the mode click the left Stick once to the left and the hazard warning light will flash once, return left bottom trim to the centre.

[@petervango7171]

As a newby. instructions all great and understood , one problem remains ,truck will not shut down remotely...

[@ianyams]

Brilliant glad I could help. I haven't got the remote any more but there is a way to shut the truck down remotely, check out Terri Wilde KZbin channel she's an expert on the MFC control's on various transmitter's.

[@petervango7171]

Many thanks,will do tomorrow. Ive also joined an RC truck club. May be able to help as well. P.V

[@ianyams]

Great, are you in the U.K.?

[@ianyams]

Controls are pretty much the same on the MFC 01 & 03 kzbin.info/www/bejne/j6rFeWaIbLZnd9ksi=3t6YWMqQScA21Da3

[@ianyams]

Shutdown procedure also in this video, in German but you can see what he is doing. kzbin.info/www/bejne/a6GmhZyBd76UoZosi=GjO6tsInfXxzPFR3

[@gourav925]

Pleas replay me

[@ianyams]

Flysky fs-i6s

[@gourav925]

@@ianyams how to control 4 hydrolic and forword and backword right left only 2 joystick

[@gourav925]

@@ianyams Would you be friends with me

[@ianyams]

Forward and backward is controlled by the shoulder rocker dial's on the transmitter. The joysticks Only control the boom, stick and bucket.

[@gourav925]

@@ianyams Would you be friends with me