Cartoon RC Car Body | How I Painted My RC Body To Look Like A Cartoon

[@outbackrcaustralia4895]

Sensational art work Mick👌, I'd have absolutely no idea where to start with doing one and can appreciate how much imagination and skill it takes to produce what you've done, thanks for sharing your how to video mate👍, atleast we have a great starting point. We had a bit of a laugh when you clicked that you have a chassis for it lol. Thanks again for sharing this mate and congrats on a fantastic job, I bet we're going to see more people having a crack at one now😁👍🙋‍♀️🦘🇦🇺

[@RCHobbyShed]

Thanks mate! Thanks for the kind words as always. Haha yeah, I remembered I have a new MST chassis somewhere which after thinking later, I think is a drift chassis. So no good for this one, I'll grab a touring car chassis for it at some stage. Glad you enjoyed the video mate. Haha, yeah I can see loads more of these popping up in the next month or so! 😂👍

[@outbackrcaustralia4895]

​Pleasure Mick, Thanks mate👍. Spewing about the MST chassis being a drifter!. BTW the white reflections you painted on worked really well hu, at one stage we could see the same reflection from your lights👌.

[@RCHobbyShed]

@@outbackrcaustralia4895 Haha, well I think it's a drifter. I remember its has adjustable wheel base and mid or rear motor mounts, but just can't remember where it is. I'm guessing it's in the same "safe place" as my two missing Ultima's 😂. Thanks mate, thought about the reflections along the way, trying to get it accurate in case I go matt finish, where it won't have real reflections🙂👍

[@outbackrcaustralia4895]

@@RCHobbyShed I have heaps of very very safe places 😂, I use them daily but a different one each time.

[@RCHobbyShed]

@@outbackrcaustralia4895 Lol, I hear ya mate! 🤣

[@RCRetro]

This is great. By far best cartoon body I've seen so far. It doesn't even loo real in front of you. Love the fad of orange/yellow but what really sets this apart is the blue faded windows. Excellent!

[@RCHobbyShed]

Thanks Ari. I'd seen so many with either clear or black windows and thought it needed to look more like a drawing, windows and all. Cheers! 🙂👍

[@TAMIYALegends]

That is truly awesome Mick, it’s the first time I’ve seen this done. You absolutely nailed it my friend 🤩🤩🤩

[@RCHobbyShed]

Thanks Glenn! I reckon the inside of my nose looks much the same now too 😂. Thanks mate, glad you like it! 🙂👍

[@aut0bahn]

I’ve seen these cartoon style body finishes start to pop up. I think it’s an awesome idea and deviation from the typical livery. I might actually get an air brush now and give this a whirl. Nice work

[@RCHobbyShed]

Thanks mate! Yeah this type of thing is good for a change I think. Go for it mate, it's fun and quite easy! 🙂👍

[@aviano72]

That is the best and most fantastic paint job i have seen Posca pens are really great

[@RCHobbyShed]

Thanks mate! 🙂 Oh yeah, they're great. I've had a couple for a while but only gold and silver, which aren't too great to use. I guess it's due to being metallic but the non-metallic colours are awesome to use! 🙂👍

[@ilam9082]

Wowwww! That is so creative and artistic Mick! It turned out perfectly👌. The colour combination, shadowing, lines and quirkyness all worked so well together. Well done 🤗😘👌

[@RCHobbyShed]

Thanks Ingrid! It all seemed to gel in the end, which is always relieving! 😂🙂👍

[@ilam9082]

@@RCHobbyShed yes, absolutely, good work Mick 🤗

[@RCHobbyShed]

@@ilam9082 Thanks Ingrid! 🙂👍

[@CornholioMcGeeRC]

Dude that looks absolutely kick ass!! The way you were talking like you haven’t done it before it turned out great!! First video I’ve seen from you definitely a good one!! 👍

[@RCHobbyShed]

Thanks Nathan! Haha yeah, I was surprised with how it turned out. Once the colours started going on I was relieved as it was all coming together nicely. Glad you enjoyed the video. Cheers! 🙂👍

[@AddamsPlayground]

I think it looks fantastic Mick! Very nice and the jagged and un-perfect lines makes it so much better looking I believe. On camera is looks perfect and just like a drawing it is going to have a few things wonky but that adds to the look of it. Excellent job my friend and you need to go out and dig up that chassis for it to sit on, it is a show piece now!

[@RCHobbyShed]

Thanks Addam! Yeah it was actually refreshing to do a paint job that didn't need sharp lines. Haha yeah, might be easier to just buy another chassis. 😂👍

[@TheRCScotsman]

That looks absolutely awesome! I might have to try this with a GT12 race car!

[@RCHobbyShed]

Thanks mate. Sounds like a plan, go for it! 🙂👍

[@stephenpheonix6549]

Looks epic! Well done! Thanks for all the details and steps how to do it.

[@RCHobbyShed]

Thanks Stephen! I'm glad you found the video helpful. 🙂👍

[@andrewmagro7703]

Mick thats absolutely Awesome , for a min there i actually thought your thumbnail was an actual cartoon , nice work for sure , now put it on a mad chassis

[@RCHobbyShed]

Thanks Andrew! I gotta find a chassis for it. I really want to put flat dish wheels on and make them like a cartoon style too, should finish it off nicely! 🙂👍

[@hessenvan9317]

That’s awesome! Thanks for showing how you created this masterpiece. Got a Tamiya 6x6 School Bus Kit laying around here. I saved your video for the time I build this School Bus. 👍

[@RCHobbyShed]

Thanks mate! I'm glad you enjoyed the video and it might be helpful in your build. The 6x6 school bus will look awesome in cartoon style. Cheers! 🙂👍

[@DaddyDaughterRC-sw2zb]

That is a work of art !!! Thanks for taking us along step by step

[@RCHobbyShed]

Thanks mate! No probs at all. Sorry for the slow reply. 🙂👍

[@michaelvtx1]

truly awesome Mick to cool

[@RCHobbyShed]

Thanks Michael! 🙂👍

[@MarkBryanRC]

Awesome job, Mick! What an amazing cartoon car you created there. Funnily enough, I just used a POSCA pen to add channel names to the body of a community RC build. But you just gave me a great idea of how to use these pens on a future project! It's fantastic to see how you can use your skills and imagination to come up with something truly unique. Great job mate! 😎😎👌👌👍👍

[@RCHobbyShed]

Thanks Mark! The POSCA pens are great. I've been using them for the odd touch up here and there for while now. They're quite reliable too compared to other paint pens. I'll have to look out for your community build, I don't get to watch as many channels as I'd like these days so I miss a lot. I posted pics of this body finished on a Facebook group (rc airbrush obsession) yesterday, great bunch of people there! This is where I got the cartoon idea, before that I'd only seen one real car done like this. Anyway it's since gone nuts, people are sharing it everywhere. I had 200+ comments to answer this morning, so I was at it all day. Of course because I was replying over and over, Facebook decided I must be spamming, so they've restricted my account for 24 hours. Which means I can't comment anywhere on Facebook... Just can't win mate! 🤣 Anyway, I'm glad it may have given you some ideas. I'll keep an eye out for your videos! 🙂👍

[@jkotva22]

WOW, LOOKS AWESOME! I like the gloss exterior. Color choice is spot on.

[@RCHobbyShed]

Thanks mate! 🙂👍

[@darkstorm303]

Great idea Mick turned out really well and painting the windows blue adds to the cartoon effect 👌 have a great weekend 😊

[@RCHobbyShed]

Thanks mate! I figured cartoons have drawn in windows too, so had to add the blue for realism. Hmm, realism in a cartoon 🤔. Well, you know what I mean! 🤣. Thanks mate, hope you have a great weekend too! 🙂👍

[@craiglloyd8123]

Epic mate! Looks phenomenal! Very original too 👍🏼😎😎

[@RCHobbyShed]

Thanks Craig! I'd seen a few around but thought I'd try to make it different. 🙂👍

[@CactusCrawlersRC]

That's awesome for your first attempt, I've got to try a cartoon paint job on one of my crawlers!

[@RCHobbyShed]

Thanks mate! Yeah, give it a go it's really quite easy. 🙂👍

[@Graham_Patch]

Looks spectacular. Seems quite straightforward too.

[@paulfriar7517]

That looks amazing!!! Great video buddy👍🏻

[@RCHobbyShed]

Thanks Paul! 🙂👍

[@ShenRC]

Nice how to, It came out awesome!

[@RCHobbyShed]

Thanks Steve! Hey I saw you got your Hotshot back on all fours and ready to rip, good stuff mate! 🙂👍

[@DiogeneDeSin0pe]

Great work! That is far from the roughest one I have seen, you got just the right balance.

[@BigDumbMeRC]

looks beautiful! i fell in love with this style of animation after playing borderlands when i was young. 10/10

[@RCHobbyShed]

Thanks mate! That's awesome, glad it brought back fond memories for you. 🙂👍

[@jesseortega8598]

That came out Absolutely Awesome 😃. Can i get those markers here in the States. ?

[@RCHobbyShed]

Thanks mate! Sorry for the slow reply. I'm sure you can get them in the states. 🙂👍

[@lo2713]

Smashed it, ive seen a few of these and they do look good. Look forward to seeing it out and about 👍

[@RCHobbyShed]

Thanks mate. Yeah, they're pretty common now. Hoping to get a chassis for it soon. 🙂👍

[@lo2713]

@@RCHobbyShed i may have a go at this, we use those paint pens at work 😁 but it will look rubbish when i try it, i have no artistic flair 😂

[@DavidVoisin-ij2bh]

You have done an amazing job. What a great idea!

[@RCHobbyShed]

Thanks David! 🙂👍

[@PeteWylieRC]

Hey that looks epic Mick! Well done, top work 😁👍👍

[@RCHobbyShed]

Thanks Pete! It actually turned out better than I expected. 🙂👍

[@andrewdonaldson2802]

Well done Mick! That is a ripper looks sensational mate way above my pay grade but great to watch someone who knows what they are doing.

[@RCHobbyShed]

Thanks Andrew! I'm glad you enjoyed the video mate. 🙂👍

[@ralfdebrauwer1392]

This is something I'm going to try myself. It looks like a fun thing to do and yours turned out great! 👍

[@RCHobbyShed]

Go for it, Ralf! It really is fun, you'll love it. Thanks mate! 🙂👍

[@thomasturbert3473]

Great video I really enjoyed it. I was curious about what brand markers those were

[@RCHobbyShed]

Thanks mate. The pens are UNI POSCA brand. @3:10 🙂👍

[@craigpimlott204]

Great job fella .if you use poly paint for your main paint job you can use acrylic paint over the top without any problems of it cracking and falling off ..I’ve been priming all my crawler body’s for years with poly paint as a sort of etch usually a silver base .then used acrylic or celly paint for the colour I want the rig .I paint all my body’s on the outside because I don’t like the fake plastic shine when painted inside because a real car doesn’t shine like that …then I weather or rust it if i want a rough dog of a rig .when the paint scratches off on rocks etc the silver shows through from underneath the colour like a real steel body .👍🇬🇧🇦🇺♥️

[@RCHobbyShed]

Thanks Craig! I think Armma paint their trucks the same way. Silver underneath so the look like metal when scratched. Good idea! 🙂👍

[@mrupscale]

Awesome paint job! Great Artwork!

[@RCHobbyShed]

Thanks mate! 🙂👍

[@sinemcay6415]

Great Job

[@RCHobbyShed]

Thanks mate! 🙂👍

[@cardboardcrawlersrc8805]

That looks super nice

[@RCHobbyShed]

Thanks mate! 🙂👍

[@pertsasep]

Awesome paintwork man! Wanna ask some question about pressure and needle size you using when painting acrylic paint. It look`s like there was no paint coming out. i`m just started airbrushing. i moustly use Vallejo air paint. 0,15 when detailing an 0,4 needle when painting overall paint. and pressure i`m using is somewhere 1,5-1,8par.

[@RCHobbyShed]

Thanks mate! I'm used a .3 needle. When I was painting the orange around the edges and the blue in the windows, I only used around 20PSI. Same with the yellow. For the white backing I run it at around 40PSI. The Proline paint I find still needs thinning as it's quite thick. I usually use a few drops of reducer but I still ran is quite think on this occasion. I actually wanted a lot more air coming out than paint so it fades better. 🙂👍

[@pertsasep]

@@RCHobbyShed Thanks for answering. I need to try with these pressure settings and see what happened👍

[@edwincordero8]

Very nice job. Well done. Looks different and like no other body shell.

[@mattluszczak8095]

I reckon an rc10 would look good in this style aswell

[@RCHobbyShed]

I agree, Matt. I've seen a lot of drawings of RC10's over the years but a real life cartoon RC10 would be awesome! 🙂👍

[@jack-o-trades]

I thought about this when I was doing my RC10CC. Having never used this technique, I wasn’t ready to take the plunge.

[@mattluszczak8095]

@@jack-o-trades buy a replacement body and have a go i reckon

[@sustorres765]

This was superb! Great tips mate just got to pick a body now, I’m defo doing this 🤩 siiiiick 👍

[@RCHobbyShed]

Thanks mate! Glad you found the video helpful. Go for it mate, you'll smash it! It's gonna be siiiiiick! 😁👍

[@sustorres765]

@@RCHobbyShed 😂😂 thanks Mick your episodes are so sweet! Loving your work 🤩👍

[@RCHobbyShed]

@@sustorres765 Thanks mate. Lots more to come! 🙂👍

[@sustorres765]

@@RCHobbyShed Siiiiiiicckkk 😂😂🤘

[@sustorres765]

@@RCHobbyShedfound one I’m going to go for a Skyline R34 🤩👍

[@stevemoon2136]

Very impressive & incredibly effective. Thanks for the tutorial 👍😎👍

[@RCHobbyShed]

Thanks Steve! I'm glad you liked the video and maybe found it helpful. 🙂👍

[@voodooreptiles3553]

Great Idea, I keep looking around for Roger Rabbit.

[@n22pdf]

That's awesome work Mick.. as someone else suggested RC10 or similar retro would look cool :) Pete

[@RCHobbyShed]

Thanks Pete! 🙂👍

[@The_Jet_Truggy]

I love this paint job!

[@RCHobbyShed]

Thanks mate! 🙂👍

[@bidibulle6795]

I love the cel cartoon look!!! really very very beautiful. I never thought about it for my RC, I have a t2m pro truck body for my Tamiya TA-02 T and yes, I'm going to try that! Thanks for the tutorial, your channel is great. Happy New Year and health to the whole family.

[@RCHobbyShed]

Thanks mate! I appreciate the kind words. Sounds great, a truck will look awesome in cartoon style! No probs at all mate, I'm really glad the video was helpful. Happy New Year to you and your family too. Cheers! 🙂👍

[@ryguyrc8029]

Been thinking about doing this sort of paint job on my rc4wd tf2 xtra cab.. only downside is it’s a matt black truck and a hardbody. I’d have to use white and silver to make the cartoony highlights on body lines. Haven’t really seen it done especially on a matt black truck. Hmm..

[@RCHobbyShed]

I think you'd be OK to paint (using the pens) over matt black. I can't see there being an issue at all. 🙂👍

[@theadventuresoflario]

That's absolutely stunning 😮

[@bluddywulf6796]

No sht, just seen your post on Facebook. That's a awsome job. That would look sick with some el wire .

[@RCHobbyShed]

Thanks mate! Haha yeah, some el wire would look funky. 🙂👍

[@patrickdubois7692]

Awesome!

[@RCHobbyShed]

Thanks mate! 🙂👍

[@GarryCox-tx5mw]

Great looking body thanks for the video 👌

[@IowaBudgetRCBashers]

This is awesome Mick. I shared to my community page

[@RCHobbyShed]

Thanks Thad! Oh nice, thanks heaps mate, that's awesome! 🙂👍

[@zemerdon]

Brilliant and thank you for this amazing step by step. Is it also possible you have a model number list of your airbrush setup compressor etc, or a video? I'd like to copy someone who knows what they're doing if possible.

[@RCHobbyShed]

Thanks mate, no probs at all. I'm glad it can be helpful. I do have a video about my setup, I'll leave a link below. Cheers mate! 🙂👍 kzbin.info/www/bejne/aHm8nJufn9J0npY

[@zemerdon]

@@RCHobbyShed Mate, the step by step doesn't get any better. Really appreciate it, and your setup which ill be saving also. Ill look forward to your future Airbrushing work 😋

[@RCHobbyShed]

@@zemerdon I figured it would be pretty long but didn't want to leave anything out. Thanks mate, it's good to know people appreciate the time and effort. Planning a few bodies in the future. There's always something to paint! 😁👍

[@zemerdon]

@@RCHobbyShed all honesty, it went quick for me as i really enjoyed watching and learning, and your easy to listen to 😎

[@RCHobbyShed]

@@zemerdon Oh nice! Thanks for the great feedback. 🙂👍

[@Mrtrc33]

That looks so good . Love it 👌 Cheers John

[@RCHobbyShed]

Thanks John! I'm quite happy with it. Might have to do another one at some stage. 😂👍

[@Mrtrc33]

@@RCHobbyShed definitely 👌

[@MadBeeRC]

Love it Mick! So damn cool! I got to try that! Nice one mate!

[@RCHobbyShed]

Thanks James. Go for it mate, it's quite fun to do. 🙂👍

[@AllRCACTION]

Looks Excellent!!!

[@RCHobbyShed]

Thanks Douglas! 🙂👍

[@hyster16t]

Awesome 👌

[@RCHobbyShed]

Thanks mate! 🙂👍

[@leewill77rc]

Looks great 👍

[@RCHobbyShed]

Thanks Lee! 🙂👍

[@markconnor269]

Mick that looks absolutely amazing 👌 great job 👍

[@RCHobbyShed]

Thanks Mark! 🙂👍

[@lostinature]

This looks proper good!

[@benstutley2904]

Hi Mick! -I missed this one at the time, looks bloody excellent mate! Hope you're doing ok and look forward to more vids, All the Best! :)

[@simonbartlett8759]

You should sell these. I would definitely buy some!

[@wombat_models]

Nice effect - looks good.

[@RCHobbyShed]

Thanks mate! 🙂👍

[@darreneisenhardt5403]

That looks so cool, awesome idea

[@RCHobbyShed]

Thanks Darren! 🙂👍

[@ashsingh9339]

Dang that's a great looking body. That's some talent there mate. 👏 ❤

[@RCHobbyShed]

Thanks mate! 🙂👍

[@manuferguson8197]

Bro that shell looks awesome, I did a cartoon one for my grand daughter …….I built a frog for her.

[@RCHobbyShed]

Thanks mate! Oh nice, the cartoon theme would have been a hit with your grand daughter for sure and the Frog is always a favourite! 🙂👍

[@peetor7]

That looks fantastic!

[@RCHobbyShed]

Thanks Peetor! 🙂👍

[@juniorwest5706]

That's looks amazing , now I'm thinking how my veles would look with this style of paint job ?

[@RCHobbyShed]

Thanks mate. Ooh yeah, this style would look sick on a Veles! 😁👍

[@SkunkCity_RC]

awesome tutorial

[@RCHobbyShed]

Thanks mate! 🙂👍

[@rcicons4915]

Love it Mick! Great job

[@RCHobbyShed]

Thanks Keith! 🙂👍

[@GearDownCrawlerz]

what is the air brush kit you use. I have to try this

[@RCHobbyShed]

G'day! I'm using an Iwata Studio Series compressor and an Iwata HP-C Plus Airbrush. More details in the video below. Cheers! 👍 kzbin.info/www/bejne/aHm8nJufn9J0npY&t

[@neilhipkinsnhrc7178]

Nailed it……. First go too 😁👊

[@RCHobbyShed]

Thanks Neil! Haha yeah, I even surprised myself. 😂👍

[@rob78aco]

This is awesome. I can't wait to try this on my next paint job. Thanks for video.

[@BreydonsRC]

That turned out great!

[@RCHobbyShed]

Thanks mate. I'm quite happy with it. 🙂👍

[@arkyrc]

Looks amazing! Nice work!

[@RCHobbyShed]

Thanks mate! 🙂👍

[@pwayne3580]

Ultra rad!

[@RCHobbyShed]

Thank you! 🙂👍

[@_.Lumi._]

Thanks for the inspiration ….if i do a tamiya comical body in this style, would it be too obvious😮/

[@RCHobbyShed]

I'm glad the video was helpful. I don't think so, I think this style can suit any style of body. Go for it! 🙂👍

[@deanwellard711]

That is brilliant 👏 👌

[@RCHobbyShed]

Thanks Dean! 🙂👍

[@SHAYEN-cd5qw]

That’s Cool Mick 👍🏻👍🏻

[@RCHobbyShed]

Thanks Shayen! 🙂👍

[@inneryard]

Awesome paintjob🤩

[@agevan6735]

Nailed it!

[@RCHobbyShed]

Thanks mate! 🙂👍

[@noslackadventures8503]

That is awesome, almost as cool as your T shirt 🤘🏼

[@RCHobbyShed]

Haha, thanks mate! 😁🤘

[@MrVek7]

love it thanks for sharing this video what paint is in the paint pens as i always thought u must always use poly carb or lexan paint for bodys

[@RCHobbyShed]

Thanks mate! I'm using UNI brand Posca pens. They're Acrylic, Acrylic paints work quite well on Polycarbonate. Not as good as paint designed for it of course but still usable. Most paints for airbrushing RC bodies are Acrylics. 🙂👍

[@WellingtonIronman]

If you left the protector layer on you could test what the Matt finish would look like without committing to it.

[@RCHobbyShed]

Yeah that would work too! 👍

[@jbracingteamcz8427]

Yes😀 Nice job man👍👍👍

[@RCHobbyShed]

Thanks mate! I think it turned out quite nice, actually better than I thought it would. 🙂👍

[@herbieRCpaints53]

Absolutely Fantastic Work 😀😀, I've got a customer who wants one doing Thank you for doing such a Awesome video 💯👍👍 Just Subscribed 👍👍👍

[@RCHobbyShed]

Thanks mate! It's great that you found the video helpful. Cheers! 🙂👍

[@rc10t3]

Nice video and explanation.

[@RCHobbyShed]

Thanks! I'm glad you enjoyed it. 🙂👍

[@MrEriksweet]

Looks amazing!

[@rccarloverluxembourg718]

At first I thought, nyah, it can't grow like that, lines are not perfect, in the half of the video I thought: well, it is easy, he is not a good paintbrusher, then at the very end when only the yellow was missing, I thought, well the nuances in the orange, they're funky lovely, then came the yellow and I thought: mmmh perhaps he's a good airbrusher, and then came the windows, and then I thought: well he's doing them blue, WTF ? And then I saw the "graduado", and the strong or light blue was not just up or down, it was how the real shadows fall. So the whole car is sensational and you are a genius ! Comical Frog, well that could be your next comic project :-)

[@RCHobbyShed]

Haha, thanks mate! Don't worry, I'm often unsure as I embark on some of these projects. 😁👍

[@rccarloverluxembourg718]

@@RCHobbyShed Sorry, I hate to repeat myself! You are a great artist. Big dot. A+. End of useless discussion :-))))

[@RCHobbyShed]

@@rccarloverluxembourg718 Haha, thanks mate! 🙂👍

[@lesprudence374]

Hi great job what paint type in the pens you are using. Thank you

[@RCHobbyShed]

G'day! Thanks. I'm using UNI POSCA pens.

[@KRD12K]

Very cool

[@RCHobbyShed]

Thanks mate! 🙂👍

[@DipeshHinduja]

Amazing job mate! Been wondering about paint pens myself, glad to see they stay when using a spray on top. Think rattle can vs airbrush would impact the paint pens any differently?

[@RCHobbyShed]

Thanks mate! I have used these pens in the past (in small amounts) and used rattle cans over the top with no issues. I think you'll be OK as long as you use light coats over the pen and slowly build it up. 🙂👍

[@SPEXWISE]

Ok I did like and I subbed too. Awesome work.

[@RCHobbyShed]

Awesome, thanks for the support! Cheers! 🙂👍

[@cjhines8]

love it! can't wait to do mine. what size needle are you using in your airbrush? im completely new to air brushing, i have a .2 and .3 mm not sure what to use. thanks

[@RCHobbyShed]

Hey Cj! I'm using a .3 needle (Iwata HP-C Plus airbrush) but I think for this type of job even a .5 would be fine as there's nothing intricate to worry about. Cheers! 🙂👍

[@cjhines8]

@@RCHobbyShedthanks! i did end up using the .3 on mine, and the .5 for the white backing.

[@RCHobbyShed]

@@cjhines8 Good stuff, glad it worked out for you.

[@HeadBassVTEC]

that looks quite cool, might "attempt" that on my next body ;o]] will probably look terrible compared to yours but why not try something new, probably the best design concept to attempt if you lack skill or precision ;o] might break it up a bit and add some complexity at least, I usually do my bodies very simple with 2-3 colors (spray paints) so adding some small details with an acrylic pen (which I already have few around) might add some interesting details without lot of intricate liquid mask cutting and adding multiple color layers

[@RCHobbyShed]

Thanks mate! Sorry for the slow reply. Yeah, this style is a nice easy one, no elaborate designs and intricate cutting to worry about. Go for it, I'm sure it'll turn out great. 🙂👍

[@jglawncare2010]

Would you get the same effect using spray can? I don't have an airbrush setup

[@flyfishbrad]

Great video. Do the Posca pens hold up okay once painted over?

[@weloveledlights4302]

I 'm going to try this my Mazda

[@birddog0]

This is the best!

[@RCHobbyShed]

Thanks mate! 🙂👍

[@qesheth2]

I'm trying to decide if I want to do my car this style, I'm seriously considering getting a BMW e46 body for my rc and trying this 1st

[@STP_RIDGELINE]

Freakin awesome 🤙🏼💯🔥🔥🔥🔥🔥🔥

[@AntsRC]

Did you just wash it the once before you did the pen detail,, and just try to keep finger prints off it?

[@RCHobbyShed]

Correct! I do that with all my bodies, no probs yet. I try not to touch the inside of the body too much but if I do happen to have sweaty hands, say on a hot day, I'll usually wipe over the area with Tamiya Polycarbonate Cleaner. Completely washing the body again will likely ruin the masking. 🙂👍