Cascadia outside air temp sensor replace

[@brians7901]

Any idea where its located on the 2023 cascadia? I want to cover it with snow so i dont have to optimized idle

[@DKUSTOMSGARAGE]

It’s in the driver mirror!!

[@Sloba1992]

@@DKUSTOMSGARAGEwhere in window?

[@DKUSTOMSGARAGE]

I’m sorry. For a 2019-2023 cascadia it is in Driver Mirror. It sticking out on the bottom.

[@adrianvillegas3092]

Does any know know what a CDTC sensor is?

[@koollee]

I was hoping to get a look at the 2 wires coming from that plug. 1 black and one green. Mine was disconnected too and it got chewed up somehow. I didnt know what it went to so i cut it off but now i cant find it. I had the same dash fault code as u and the same problem but i need to get a new 2 wire plug, or at least find out what side the green wire goes to and i can rewire it. Thanks for your video. Do u still pull CRST loads? I started with crst.. im here now, in the Riverside terminal haha

[@DKUSTOMSGARAGE]

I don’t pull CRST, I think that one time was a power only to get to my trailer. You can try ether way those x2 wires. But with out that sensor, you wouldn’t be use an A/C. Just to let you know.

[@koollee]

@@DKUSTOMSGARAGE i have an older 2011 Cascadia. The ac works but sometimes it doesnt come on.. rarely, then i turn it off then back on and it wlll come on. Im pretty sure its that sensor. Ill fix it.. mainly need the plug u pulled out, or at least to know which wire goes where. My sensor is still there

[@kingofthedeepsea2458]

Great content man these are informative! Great work like always!!!

[@moebenjeddou782]

Could this be the reason my fan running constantly 2013 cascadia code spn 647 fmi 5

[@DKUSTOMSGARAGE]

This sensor for ac, for a fan you need to check different sensor. Is your manual or electric fan? I think with that age of truck. Check sensor that send signal to fan, or check wiring from sensor to fan. Maybe clutch stuck in ingage position. Got to see in person.

[@moebenjeddou782]

@@DKUSTOMSGARAGE i replaced the fan clutch solenoid the problem is that i have low voltage to the solenoid plug reading 1.8v and 2v and its hard to follow the wire and look for the problem

[@DKUSTOMSGARAGE]

Sounds like a ground maybe?

[@luisdiaz-fe9jg]

Hello, can you tell me what is the part number of the ambient sensor

[@DKUSTOMSGARAGE]

Ask dealer with a vin#

[@rickl7024]

Had one of these in the shop setting off freezing temp warning about all the time,turned out to be wiring problem

[@anthonyisom1942]

Sensor is in a different spot on the 2020 Cascadias

[@DKUSTOMSGARAGE]

I had 2018 Cascadia and it’s was a glider. New trucks are totally new with stuff relocated big time!!!

[@slick6964]

Where is it?

[@DKUSTOMSGARAGE]

It’s in the bumper on the passenger side. Check out after 1:00min, you’ll see where I was pointing with the camera.

[@DKUSTOMSGARAGE]

I just start to drive a 2021 Cascadia, so when problem occur, I’ll let you know ;)

[@operationcaddyshackgopher1664]

Thank you

[@CRYPTO-AIR-DROP632]

i m 2nd

[@jamessmo7062]

3323

[@jamessmo7062]

520463