How To Transform Your Steering Wheel | East Detailing Steering Wheel Cover

[@CashedOutCars]

Get 10% off at www.eastdetailing.com with promo code CashedOutCars Watch my full review here! kzbin.info/www/bejne/a3qkdZybfK6Sgsk

[@0brooo]

Thank you so much! I was looking for a super customizable wheel. And your link helped out. Definitely used that code

[@davedemayo5241]

WOW! I was going to purchase one of these covers for my Mercedes. But after watching this video and seeing how incredibly complex and involved it is I said no way. I'm glad I found this video BEFORE I made the purchase.

[@sven_the_giant]

It's a lot easier than you think. This guy did the most complex way possible lmao. Check some other videos out. I just did my Chevy Silverado and I did it in an afternoon over the weekend. You definitely don't need to dismount the steering wheel.

[@kylevids3951]

If you cant do it just say so

[@exi9164]

It’s not hard you’re just lazy

[@mvngo2603]

Not for the rookies

[@4funner66]

Man that’s a shame- all it requires is some patience! If I can do it I know you can. I’m an idiot! 😂

[@chrisedgerton5464]

I’m glad I found this video, just so happen to be working on the same steering wheel! Mines out of a Mazda protege5

[@CashedOutCars]

Glad it helped! I love these mazda wheels

[@NvrGoATM]

i super glued the ends after i was finished on the underneath of the steering wheel cover

[@timnb0340]

looks super cool!!!

[@CashedOutCars]

Thanks my man!

[@TheCreationman]

Great video! I ordered mine with the perforated leather and suede as well on my 2014 f150 The stitching and time is my only issue right now. I know I’ll do a good stitching job, but I’ll have to put my whole day aside for it haha

[@CashedOutCars]

It certainly takes some time and patience. Best of luck with it!

[@LukBacca]

Took me hours, had to redo the whole top area but on the redo I was 2-3x faster so it wasn't too bas

[@robertpac4114]

Nice work!!

[@LukBacca]

I went with carbon fibre but in hindsight I'd probably go with suede at the top and bottom just because carbon fibre can look a little flashy

[@Qspecialman]

Excellent video, thanks for taking the trouble.

[@MrSed228]

My thread keeps twirling and knotting as I'm stitching...any tips?

[@thewayfaringanarchists8157]

my blob sti is in dire need of this

[@CashedOutCars]

It makes a nice improvement in feel and look! I’m thinking about doing the wheel in my 92X Aero, it could use it too!

[@thewayfaringanarchists8157]

@@CashedOutCars ill be ordering soon with your code ! great channel BTW

[@iRidetas]

looks awesome. Top job

[@CashedOutCars]

Thanks my man!

[@chadgeissler4544]

Where did you get the ball mount you used to hold your wheel in the video?

[@mauricio951]

How is the material holding up after almost a year? Have oils and sweat degraded the areas that you hold on to most?

[@CashedOutCars]

It’s still doing quite well! Mild staining on the white stitching, but nothing major and I haven’t tried to clean it. The material is still in great shape

[@bcrosby51]

Where can I get that mount at to hold it while working?

[@LetsgoSM]

how did you thread and knot the needle? i notice you had a one strand stitch on it but all the videos i found online only show double strand

[@Augie..]

The instructions tell you exactly what to do

[@hamzahsyed7485]

I want to do my steering in my new 2000 Toyota celica

[@CashedOutCars]

Go for it!

[@JasonAdank]

Id love to see a video for this process on a 2nd Gen (2005-2015) Nissan Xterra! Is removing the airbag and steering wheel really necessary? I have this crazy fear something will bump the wrong way and the airbag will explode in my face.

[@Augie..]

Nope, keep the wheel in the car. That’s what 90% of ppl do, this dude just did it WAY more complicated than you should.

[@hartautosports6856]

Just ordered this for my personal car went with the suede and carbon fiber with blue stitching with a blue 12 o clock point. Can’t wait because it’s my first wheel and I’m redoing my entire interior anyway

[@markkoons7488]

Good tricks all. Thank you. Wish it was easier to pull the wheel off.

[@CashedOutCars]

Glad it helped!

[@MrKhawks]

Chevy cobalt SS

[@NickBuenoo]

Do I Poke a whole in the steering wheel cover as shown in the directions ?!?!

[@NickBuenoo]

Hole *

[@robinmckeegan5451]

No poke into an existing hole'

[@Baneslayer]

and not a single mention of the professional grade steering wheel stand you happen to have... They just have those at princess auto right? 😂😂

[@CashedOutCars]

My dad may or may not do automotive upholstery professionally, hes got some nice tools like this

[@jarrettmcgowan3663]

Anyone go thru with this? I have 0 stitching experience but am interested in the product since my steering wheel is peeling.

[@CashedOutCars]

It certainly takes time and patience but can be done with no experience

[@justinp2922]

What if i want to remove the tape later is the wheel damaged?

[@CashedOutCars]

That’s something I haven’t tried, I’d imagine it’d be okay. You may have to carefully use some adhesive removal though. It’s worth a test on a scrap piece of material

[@baileyflanagan3081]

How dose the suede material hold up?

[@CashedOutCars]

It held up great so far, but it hasn't seen a ton of time in the sun

[@TheTamurai1]

Looks great! I'm also in need of doing this for my NB wheel!

[@CashedOutCars]

It makes a huge difference! Good luck with it if you go for it!

[@TheTamurai1]

@@CashedOutCars where did you get that device that mounts your wheel to the table top for easier access of working on it?

[@fa5ezra]

Super dopee vid 👌

[@CashedOutCars]

Thanks my friend!

[@saladasSTi]

You dont need to remove the old cover? Example: my sti steering wheel has old leather and stitching on it. Do i need to remove that one or no

[@CashedOutCars]

These are made to go over the factory cover!

[@Ricky_H]

Nice video! They use genuine leather not synthetic, correct?

[@CashedOutCars]

I believe they list as leather, but I’m pretty confident it’s vinyl

[@nvertes]

@@CashedOutCars Correct it is NOT real leather!

[@richlien5598]

Great video. Do you have to or should remove the old leather on the steering wheel? I have a 3rd gen 4runner

[@CashedOutCars]

Thanks! This company’s kits are made to go over the old wrap, I think it wouldn’t fit right if you did remove what’s there

[@chadgeissler4544]

No, Don’t remove the old leather! I did it on my first wheel and the cover was loose. I had to find another wheel because east takes the thickness of the original leather into account when the make the cover.

[@frenchonion3359]

Yeah i’m paying someone to put mine on hehe i dont have this patience

[@CashedOutCars]

Understandable, this takes a long time!

[@Sandwich420]

Ive noticed every single East Detailing demo is always on a simple wheel without any leather wings. These covers look nice, but the one I got for my Type-R is cut too loose, the thread gets so twisted after a few passes the thread knots up. I regret buying from them, and it really sucks because theyre expensive.

[@hecmad1]

Sucks man. I would've asked flr a refund. Mine almost didnt work. But i made it work. Looks decent. Only i would be able to notice the issues.

[@realifejon]

What did you use to restore the airbag trim? Thanks!

[@CashedOutCars]

Hi! I used Mothers Back to Black: amzn.to/3uKYXbK (affiliate link). This product works great for restoring plastic trims that have faded!

[@mafosa8519]

What’s the name of the stitches?

[@danajoseph6705]

1990 560SEL

[@thebambinofan]

@serpadesign is that you?

[@scharnier6989]

Exactly what i was thinking😂

[@bogdanbontas6535]

you could have got a better fit of the leather if you had first removed the old leather

[@CashedOutCars]

These East Detailing kits are specifically designed to go over the existing wrap. Some kits may not be though!

[@pchappy2.0]

2003 Mustang GT

[@CashedOutCars]

Sweet!

[@Iluvserotonin]

would u be intrested in me sending u my wheel with the kit and paying u to do mine for me ? i have a bmw f10 m5 wheel

[@robbobsjobs8456]

1995 Ford F150

[@sonichedgehog8723]

97 TJ

[@Vincentschneider007]

2001 Toyota Solar convertible

[@danielt4221]

08 ford mustang

[@TOTTLIVE]

Anyone has a secret about Stitching patterns?

[@VANEE2001]

Too bad my needles snapped. I’m now stuck

[@CashedOutCars]

You can get new needles, but that definitely is unfortunate

[@moStallion]

Why not just use 3M glue instead of tape

[@CashedOutCars]

You certainly can, as long as it has a long enough working time to move it into place.

[@martinlopez9263]

Be careful to order from this East detailing is been 3 months and still not receiving my order poor communication not recommended

[@yand4683]

🔥 𝓟Ř𝔬𝓂𝔬𝐒ϻ

[@jayer-su3hu]

Hell naw this thing is WAY too much work. WAY TOO MUCH WORK

[@CashedOutCars]

It certainly does take a long time!

[@MrJimFox79]

Why is your voice so weird?

[@edwardcastillo6146]

And never remove the old damaged cover 👎🏼👎🏼👎🏼

[@CashedOutCars]

No need to, it won’t be seen again and this company patterns their wraps to go over them