CAT 623 E and 623 K paddle scrapers in action- full loads!!

if you enjoy Heavy Machines in Action don't forget to subscribe for more videos 🔔✔️👍
#CAT #heavyequipment #earthmovers

[@Skyes9]

That 623E sounds marvelous

[@dozerboy67]

Those newer paddle wheels are nice, well actually all of the newer equipment is more ergonomic now, they’ve got all the controls on one stick, it’s really cool! ☝️💪👊👍

[@TTomky]

Spilled a little over the side there. Oh, and you missed a grease zerk this morning during maintenance.

[@davidnazario6646]

I used to see a lot of these when I was a little kid 🐱 Cat Power Machines 👍

[@HeavyMachinesinAction]

Definitely fun to watch working. Cat power for the win! Thanks for watching David ✌️

[@KevaNRice-hh6yh]

I had 5of these at Melbourne square mal when I built the malls pad and parking lot 900 feet of curb pads with some great operators to assist me it was a blow out beer party every night

[@SuperNavarro26]

Man I love scraper work ! Sometimes it’s nice other times your shitting your self lol

[@shannonmarie294]

I have put a 633D Paddle Wheel on it’s nose a couple times slipping off the side of mound’s! lol…. But that was over a 12 year period!

[@tedhansen3846]

We were only on G when I worked around them

[@geraldojosejustiniano]

Valeu .fera ok.

[@JasonDelarosa-op5lo]

Long cuts but now they have the other ones without the rotator.

[@travisstonehouse4932]

Love the sound of scrapers 👍 where is this job at? Great video brother 💪✌️

[@HeavyMachinesinAction]

Hey Travis ✌️They do sound nice! this site is located in Calimesa and Blackmore contracting is handling the job. Cheers 🍻

[@ConstructionMachineryChannel]

Cool, I just watched a video by Pushysix today about scrapers and he talked about these paddle scrappers. Never seen one of these around here (Chicago). Are they common by you?

[@HeavyMachinesinAction]

Yes sir, paddle scrapers are very common but only on smaller grading jobs. Btw no luck yet on the D11.

[@ConstructionMachineryChannel]

@@HeavyMachinesinAction It will be worth the wait, D11 videos are great to watch.

[@HeavyMachinesinAction]

I agree! I also really enjoy watching the Detroit diesels. Please more of those if you can.

[@neftalirosado6167]

Great video and great job 👏🏼👏🏼👏🏼👏🏼

[@HeavyMachinesinAction]

Thank you Neftali✌️

[@ponydong]

Great vid mate

[@user-id5jk3oz3i]

what is the difference in a paddle scarper, and a regular scraper??

[@hawkdaddy64]

I used to build the cabs for those. We had the ROPS, CROPS and ICROPS.

[@Beko712]

Hallo bro 👍🙏🙏

[@machines3609]

Cỗ máy tôi chưa bao giờ thấy

[@dalestraw2258]

To long in the cut way too long

[@wz7285]

Company should equip camera, cheap fix! Paid for in one hour!!

[@cspicer21]

Seriously. Shits just spilling over. Get the hell out of there earlier

[@shannonmarie294]

I was thinking the same thing, once it’s pouring over the side’s you’re done! I used to run 623 E and H both!

[@351peterbiltsmsrepair8]

I can get a load in 45 seconds

[@ricklewis6904]

Add theeth to cutting edge works better

[@HeavyMachinesinAction]

I've never seen such thing on a scraper before.

[@miketorres3597]

You don't put teeth on a Cutting Edge Rick.

[@ryangeraghty8707]

Perhaps in virgin ground, but this material seems fairly loose, and the loading time is quick enough

[@ryangeraghty8707]

@@miketorres3597 Yes, it is bolt on option for these machines

[@machines3609]

Bạn đang làm việc gì đó

[@billy28]

LOST MORE THAN HE PUTS IN BOX HORRIBLE THINGS PADDLE SCRAPERS.

[@shannonmarie294]

It’s not really the Scraper, it’s the Operator’s! I ran those and 633 D’s both for many years and once it start’s coming over the side’s you’re done!! Time to gradually lift up and get out of there. And no I’m not trying to pick an argument with anybody, just saying is all.. :)

[@KevaNRice-hh6yh]

Now go spread it 3" sonitair out in 2yeaars thenbyou can use it again

[@yecatsbearcat9117]

The Cat 623's are garbage. We bought one in early 2020 and have less than 50% uptime. The wheel seals are a nightmare in that they are integrated with the brake and final drives. That's only the start of bad things. This machine is currently at our favorite Cat dealer, Fabick in Cape Girardeau with a broken draft arm. Expect to spend $100K and up for annual maintenance. We use these to mine clay and have 7 Cat 615's which are a workhorses compared to the new junk Cat puts out. We are forced to buy 623's due to our mining layout and of course no one else makes a elevator scraper in this size. Fortunately we bought bumper to bumper warranty on these and the first 10,000 hours racked up over $400K that Cat was forced to pay. It only goes downhill from there. These are built for road grading only.

[@rossgray3070]

623s are just the elevator version of the 621, same front end just the elevator to load, don't know if 621s have the same problems.

[@imnopp]

I agree the k 623 models are junk. They get stuck on wet grass, transmissions self destruct and the aftertreatment systems are constantly having issues.

[@guacamoleweiner69]

Sounds like a k model scraper all right Get a g model scraper instead

[@rodneycody8746]

It's full learn how to run it