CAT 993K loading 777G trucks

Enjoy and take a ride with this CAT 993K loading fleet of 777G haul trucks, and 2 pass loading couple 775F's!

[@jimgill7524]

I operated the 2nd one of those 993's to be put into actual production in North America. Very nice machine to say the least

[@chrismcinOZ]

27yrs I've been a loader operator and national trainer assessor. Excellent. 1. Operating at full noise 2. Very close to truck. 3. Digging straight and loading on the artic 4. No wheel spin 5. Full buckets. 6. Keeping a good floor. And doing it consistently. 👍👍👍👍👍 5 thumbs

[@thatguycarmine1]

Thank god for KZbin operators.

[@dougferguson5581]

He curls too fast. I run 992 988 Cats i force it in drag my bucket up flat and curl at the end. Packs in better and the curl tops it at the end. No one does that..unless you have seen it.

[@heeeeeeeyyyyyyyyy]

As a Machine Operator. This guy is a really really good driver. deserves his pay and then some.

[@DirkCannon]

2 buckets and done wtf that's badass

[@user-og8jk1fc1t]

Имею честь работать на таком погрузчике 9 лет. Наработка -более 50 тысяч моточасов. Отличная машина

[@stevewilson9792]

So back in the day I ran a brand new 988 FE Cat loader for an entire season doing exactly this but in the high desert of Wyoming. Like this loader, it was a power house. It was a joy all day long except for a screaming hydraulic pump. It gave me my first migraine at 20 yrs of age. I doubled up on my hearing protection. Made the noise 30% better. You can sure hear the noisy bastard in this great film. 50 years and no improvement in the noise. Kudos to this operator. He's a hand.

[@Dovindo]

that's the way ,great operator. on forward , bucket immediately down and no material bobbling around on lift.

[@timwilcox4972]

Great operator low in the pile minimal travel getting the trucks in fast that's a pleasure to watch

[@cuthbertlewis7564]

Both drivers and operator great skills

[@michaelrichter8973]

Having worked this stuff all my life I recognize that the whole crew seem well trained !These are the kind of guys you want to hire!

[@StoneStraiff]

These guys have lots of experience

[@normanbless6300]

My cup of tea

[@dellsims9276]

The truck drivers have been schooled of the process. Loader is spotted ,you back under the bucket. Loader man is raising the bucket as he backs out of the pile ( seen so many wait til they make the motion to the truck )then in a fluid motion starts dumping before he reaches the edge of the bed . They’ve got it going on as a team. I’ve seen a few other Videos of guys operating as they are but not many. Great team work!!!!

[@christopherlovelock9104]

That operator is worth his weight in gold, - Not a movement wasted, revs kept just right, that machine will last like that, less downtime needed - tight, neat and very quick operation, - he must save the company loads in fuel alone every week, - I hope he is suitably rewarded, people like that are hard to find nowadays. Any firm would employ him and he could command top dollar wages. The trucks couldn't even keep up with him and he was moving the absolute minimum.

[@albertogarcia5276]

Christopher Lovelock I completely agree with you! it is fantastic to see him loading, simply perfect

[@christopherlovelock9104]

Thank-you. I think I would call it 'poetry in motion'.

[@jaredbrown1580]

Couldn't agree more!!! It's nice to know there are still guys out there that take pride in mastering there trade,this man did it!! I could sit here and watch him eat that entire stock pile up!

[@paulpeters5199]

You know they have a good team together he doesn't even have to blow the horn for the drivers they know every move together

[@DirkCannon]

@@christopherlovelock9104 more like porn

[@Sesguipedalian]

Damn good operator & man that thing is quick for it's size!

[@user-vb9jw7dg6k]

I don't think youve ever had a vid with a crappy operator. Great video

[@groundskeeperwille]

Best wheel loader video on KZbin.

[@lauini1]

Best wheel loader vidéo in KZbin Very good and smoothly operator Super machine Nice engine sound Great angle video

[@johnblanchard1592]

Nice video like everyone says these guys know what they are doing regards from retired loader driver in the uk. 👍🚜

[@donwoods4818]

Now that's a good operator full loads quick nice job

[@Maximloiseaux]

Any kids watching this video this is the way it's done. I know this ain't blasted rock but still he is a smooth operator

[@adam10051977]

Great angle vids! Smooth operators too!

[@paulpeters5199]

That operator is spot on very little tire revolution and not spilling material that's how it's done right there text book operator right there

[@lowboy1one1]

Such a good operator, moves that monster around like hes drivin a car

[@didierdidouchkaia4469]

Bigger is a machine, easier is it to drive...

[@norwegianearthmovers]

Just beautiful! All by the book!!

[@gordonmccoy4537]

Excellent Vid.... Thanks for posting...! Gordon

[@dannyblack4629]

operator knows what he is doing,setting up the trucks and working close to the pile of material

[@mikemayfield7716]

I got a chance to run the 994K ! Now that's a monster of a loader

[@angeloskyriakou7765]

amazing video and one of the best operators I have ever seen !!!that cat is a monster more please !!

[@Gavin84w]

A lesson for any would be loader operators right there, close V pattern, minimal time mucking around in the face, not waisting time in the face to get the bucket 100%+ full, fluid motion for the whole cycle. Another great Vid Ken even if there is no scoops!

[@tokoyoyo4159]

ذضضضذضذضضش١ذض

[@tokoyoyo4159]

ش١

[@Diinkbaallz]

great video I could watch all day!

[@ivanvenema5052]

Damn that loader is way quicker than the 990h's that i used to operate

[@adamhuehn]

Hard on the tran break more like.

[@LYEARTHMOVERS]

This is called a real scoop...👍

[@davidmorse8432]

Good operator, good machine! It is amazing how fast the 993 is. Machines this big are usually much slower. I like the way he gets the trucks to back into the pile so that spillage does not need to be cleaned up. Very efficient work cycle too. I wonder what the production is in tons per hour.

[@rem45acp]

The 994 is a lot slower. There's a video on youtube somewhere of a 993 and a 994 loading trucks next to each other and the 993 is running circles around the 994. There's also some tech in this machine that really helps - automatic raise to dump button and an automatic return to dig button. And locking clutch/engine speed so he only needs to use the clutch to slow down then it goes back up to what ever RPM it's set to.

[@rosalienne4432]

Mu hhu nnjkmmnmmmmmm...mmmm6yķ I lllp

[@saqibjakhar8999]

Excellent operator with powerful machine

[@evadvalcourt]

Wow that's a real good operator right there

[@albertogarcia5276]

amazing operator!

[@jameslindley8318]

Good Shovel Op!!! Dosent waste any travel

[@NgaPham-ld2yi]

J

[@nonickname9930]

I e joyed watching an operator who knows how to lift and roll a bucket in a stockpile. Full bucket every time.

[@jovangeming8302]

L X.

[@ronaldmolinasandoval1849]

Saludos cordiales desde Sudamérica Santa Cruz bolivia 🇧🇴 👍 excelente 💜 okey 👏 👏👏😁👍👀👀👍👍👍💚

[@emuloVretsaM]

This guy is definitely worth his money, very smooth driving.

[@thequattro20v]

Thats how it's done. Hat's off for the operators, beautiful smooth motion. Looks so easy. :)

[@darrelholmgren7731]

thequattlooks easy because it is easy

[@spinneborstel]

funny guy :)

[@tankster9974]

The loader driver yes good operator, the trucks far too slow spotting under the 993 ...

[@jserra17]

Yes, a very good operator, but also a lot of tech in that machine to make him/it efficient. He digs and dumps, but the bucket returns to level and plane automatically. I fear it is only a matter of time until it is 100% automated.

[@watchthe1369]

The dumper drivers are the hitch in the process here. No wheel spin on the loader, quick cycle time, three pass loads even with a slightly empty bucket.

[@robertbowling8393]

Indeed .... Great operator!

[@jaredbrown1580]

Nice job!!!! This is how it's done rite here!!!!

[@brettmoyle1195]

It's called the V 45 angles done it with rock 2 minute loads ..nice work guys

[@conociendoelsalvador503]

excelente video amigo siempre veo sus videos este me gusto mucho

[@jorgefonseca9225]

great CAT weell load and good operator also

[@kessymgombele4669]

I have fifteen years on using such a big loader it so excites me to work with it.

[@para05100]

Big monster!!

[@ypebanbung-michael8865]

wonderful video

[@tickedoffsheikh8587]

...so amazing to watch at 42 years old...

[@lewiemcneely9143]

I think I could do that. The 980 I ran has the tranny setup and the 115 had the wobble stick. Cats are cats pretty much. Good operator and good video!

[@ImBreezzy]

Lewie McNeely huge difference between a 980 and 993, trust me

[@tomasneel1980]

Been there , done that.... good operator

[@russ375]

I ran a CAT 980-C for 12 years. Loading trucks fun. Loading trucks plus running a screening plant not fun! Nice video!

[@user-gj8wk9cp1w]

تقنقءمقسظ

[@user-gj8wk9cp1w]

🤣😂😂😂😂

[@jasminhelac1229]

Very good!

[@JoseAlvarez-ik4mt]

Buen palista ,si señor.👍👍👍😂🙋‍♂️

[@sherwintheapachekid46]

Not Lyin’ good operator. Best I’ve seen in a while

[@franksweets1859]

Super!

[@JoseAlvarez-ik4mt]

Buen palista .Si señor.🤩🤩🙋‍♂️

[@azizbah555]

Good job

[@paulpeters5199]

That's how it's done right there

[@paulpeters5199]

Boys and girls this is how it's done perfect to a t

[@56pw]

Also ,That could of been bad at 5:48... A little bit of patience by the truckies goes along way! The loader operator is textbook.

[@johnnyallen2090]

56pw you are spot on . That empty truck should have given the loaded truck a wide berth and come in on his off side, followed him out and come straight under the loader . The trucks are slowing the big fella down A little I feel .

[@JoseAlvarez-ik4mt]

Baya máquina.Jobar de lo mejorcito.Dioos.🙈😂🙋‍♂️

[@schneiderexc3557]

Watch the tires they don't even make a full revolution, pretty efficient!!!

[@ilikehiltltools2911]

Made me look

[@johnnymurff4137]

Man So Cal you guys rock, awesome footage of gravel being loaded and handled. No music to listen to just the sound of the wheel loader and the sound of the gravel hitting the truck bed. How many pounds or tons per load were loaded?

[@lescosgrove8366]

Ken gry

[@CAT973D1]

Efficient driving is something different

[@patell5709]

I've been a heavy equipment operator for 15 years boy would like to work there

[@phillipmoore6295]

Excellent, "game recognizes game". Good to see someone one KZbin NOT operating like a frightened turtle. Good job. A+. IUOE Local 15

[@jordanspackman493]

I've never fully understood why the wings are on the sides of the bucket? Is it just to keep material from falling on the machine or to limit depth of digging into the stockpile? I've seen them on other machines in other videos and thought I'd ask.

[@larrydunlop378]

They are not really much use in this matl. Used when loading shot rock as it kicks the rocks clear of the tires path hopefully reducing cuts.

[@ricardoartigas7437]

Dahora equipamento muito bom 😄🤘

[@stefaninosole]

CAT sound ^.^

[@johnnymurff4137]

That's a lot of gravel and road base material being handled and loaded by the excavator and the operator.

[@pedropoblete7739]

Que bkn el video, yo que daria la oportunidad de trabajar en un lugar como ese sobre tido por que amo la maquinaria seria tan feliz en ese lugar.

[@NocyMusic]

Caterpillar machines rule the earth 🌍

[@diggerdave51]

Great Video, That 993K is a monster !! And is that road base material ?? And Thank you for posting this !!!!

[@kleitoshtc1092]

nice video awome video by he cat more videos of thi monter pleae!!

[@wonnelzoldilock7758]

Just feel the sounds of the engine make me sleep... Fuck so smooth

[@daliborpangue6550]

Uno de los operadores de los 777, o triple 7, un peligro

[@robertbradford2734]

Wonder what type of material that is

[@56pw]

This guy is good! Id default the tranny to second gear and get rid of that lurch during the direction changes. Second gear cushions that out and just downshift to first when the bucket edges into the pile. It sure makes for along day with that shock every f/r change.

[@TheGooj]

Cat

[@yuvrajsinhsolanki1912]

Very big monster

[@SKarlsson]

Git'n r done.

[@DirkCannon]

Did you see how fast the boom went down holy shit

[@zabeemohamadi5547]

This is a masterpiece of Caterpillar,I wonder if someone tells the capacity of its bucket

[@larrydunlop378]

The one we have is NO masterpiece. Its jerky as hell, hydraulics and the impellor clutch/brake. Trans is always running in the red during hot weather. Also extremely hard to see out of. I will give it credit as it digs like nothing else!! 20 cuyd bucket.

[@selfaware114]

What was the material they were moving?

[@abencoadoabencoado1761]

top

[@Deere2154D]

is that a KPI stacker?

[@generationll]

What freeway?Are there any large 994s in the area that you know of?

[@jghess00]

generationll I am pretty sure this is on the Boulder City bypass project in Southern Nevada.

[@cesarmacedo3888]

Meu sonho é trabalhar com uma máquina dessa

[@benzman113]

God man can that move it.

[@Taterviewer76]

Super smooth. Where is this? The USA?

[@johnm.evangelis693]

What kind of material was that, like topsoil?

[@SlickRick162002]

John M. Evangelis looks like base material!

[@xreconusmc3156]

John M. Evangelis gravel

[@miner3609]

the loader feeding the crusher looks like more fun.

[@Deere2154D]

miner360 just as boring

[@zigzag5805]

I work in lines similar to this and any dumper or lorry not sing off the same song sheet as me . always gets my Dum ass bastard of the day award . don't matter were you are there's always one . excellent driving from loader operator

[@walkerd73]

Q: what is that on the side of the loaders bucket ?

[@andywheeler9583]

walkerd73 those are to push the material outside the path of the front tires do not to tear them up

[@carloscostas5875]

Gostei do trabalho da máquina ainda quero ter uma oportunidade de trabalhar com uma dessa

[@hourse_riding]

❤❤❤❤❤

[@dougferguson5581]

1.5 tire rotations !

[@dellsims9276]

I know cat upped the yardage on the 775 over the 73’s but by what ? And the 93 over the 92c’s I believe we had 13.5 on our 92c’s