CAT D11T in action

Sukut Construction's brand new CAT D11T in action

[@johnnyw8446]

Great video, no music, just the raw sound of the dozer. One of the best.

[@oliverwabwire2836]

Now...the sounds of steel creaking, wow!!

[@generationll]

You weren t kidding that this is as brand new D11T complete with mufflers facing away from the cab at the top.This was just introduced in the past 3-4 months.Over a million dollars is working here.The mufflers on this D11T have been moved away from the front of the cab where the older D11Ts were.I wonder if any changes were made to the C32 for Tier 4

[@eh4447]

Great visuals and close up sound of the D11T bulldozing under sunny skies.

[@Prionel]

WOW! What a powerful machine! Thanks for posting.

[@gamze1281]

Ow6aklwelska

[@erikakrausmann5177]

One of my favorite videos because it demonstrates the basic characteristics of this particular dozer. I suspect this dozer has a low time and has been pampered for re-sale. She looks great and sounds great. 🔧

[@thewidower1]

Erika Krausmann this machine is being operated by one of the premier construction companies in Southern California. It’s definitely not being pampered. It’s being loaded down every day. Pushing scrapers and material. Ripping through soil and rock. This machine will not have an easy life.

[@cullenosbourn3304]

Widower1 why would you say that for ? He was just saying how great it sounds and works . This is evidently a new dozer . No doubt your “premier “ company will run the shit out of it without proper maintenance and sell it when it starts giving you trouble.

[@rem45acp]

Thank you so much for the upload, and especially for not adding any music!

[@garethifan1034]

About a 105 tonnes fully kitted out if i'm not mistaken. A far cry from our 16 tonne '74 D6,

[@rampage3337]

Yuxin Wang i think they should make the tracks a bit wider even tho it will make for less weight on the tracks it will give a mutch wider grip

[@rampage3337]

Yuxin Wang i think they should make the tracks a bit wider even tho it will make for less weight on the tracks it will give a mutch wider grip

[@CoreoBroomstick]

I'm also 23, and I'm still obsessed with dozers and heavy machinery.... and everything else is fine with me. I think my world shines a little brighter because of dozers. Haha!

[@daveboydell2896]

There must be enormous wear on these machines with all that grit in those rollers. I operated a Cat D8 on a wood chip pile the thing looked like new the tracks were polished to a shine from the wood chips!

[@markwietersen9285]

Garbage is proble the hardest on the chains and rollers on a dozer.

[@jeremytumlin3331]

Nothing says power more than the moaning and creaking of steel that size! That dozer says "I can break you whenever I want".

[@alainmonestes1125]

Jeremyz Tumlin r

[@pedromunozfernandez4662]

Jeremy Tumlin

[@gamze1281]

Lw

[@gamze1281]

Leoaoaslllalellalaals

[@gamze1281]

Wioeleowlaoesloakakrleow

[@mike3688chia]

Thanks for the awesome video. I work in Coal Mining & of course I appreciate this fine machines...

[@blainekopp8988]

I love the OLD Cats, Getting to deff to here and the feeling in my feet to feel the decellerater and my back gone ,but they say , a CAT SKINNER is allways a CAT Skninner? HA, LOVE THE SOUNDS, and SMELLES OF IT ALL!! LOVE THE OLD 17A CABLE Dozers TOO! Got to build your plain for your cut or fill!!! Blaine.

[@vidalvaldezsanchez128]

el

[@jordanmoser4145]

Only one thing could stop this beast, Chuck Norris!

[@xXxkolinkl]

lmao

[@Kaegis]

I need one of these to rake the leaves in the yard..!!

[@badlandskid]

What man doesn't? Lol Although it would take up my whole back yard.

[@ethanwehrman1654]

(afterward)...hey where's my backyard!?

[@cntslesfabrication]

@@ethanwehrman1654 four blocks away I got a little out of hand LOL

[@billysteele6009]

,87

[@wildlifemovements7843]

Lol

[@Madzor]

Excellent job there! Oh and a great day to all of you reading this! :)

[@salvatorepelliccia6655]

Madzor sbitopuntoi

[@BurbSK-bi2wh]

Interesting setup with 2 ripper shanks instead of 1 .

[@davidoutdoors74]

Great Dozer! I built A 100 pound all metal RC CAT D8 Dozer

[@lazregmohamdi4031]

لقد ذهبوا الى ابعد الحدود بفضل العلم وما هذا الا القليل في نظرهم فلهذا انصح شبابنا بمزاولة العلم .

[@richardpersoage8504]

The torque on this machine must be extreme.

[@realaussiemale567]

Absolutely. They weigh around 100 tons, just the motor alone weighs 14 ton. They don’t move fast but they’ll run all day without fail, unlike many of their competitors.

[@NickHey]

Love the D11T. Have about a dozen at work in the mine i operate in, wanna get into one of them one day :) I run 637 scrapers and run over topsoil and clay, so don't need the tynes to rip it up for us. even with harder top soil the 637s have no trouble at all scraping up the hard ground, but can see why the tynes are needed for the 631's. I can't blame you guys at all for not buying a new 637... they are expensive as fuck!

[@markwietersen9285]

The big guys are using 657.

[@jorgefonseca9225]

CAT is the best ever n1 in heavy equipment in world cheers nice vedeo mate

[@cristianobarbosabarbosa6007]

En 20006 trabalhei em Minas Gerais. Na ária da Vali pela construtora OAS e tinha uins Brutoes desses La D11 Cartepila.

[@NocyMusic]

CAT are the best reliable machines beats every other brand

[@JimConnelley]

Need his and hers parked in the garage. Family fun.

[@13frontrow]

very nice. very good operator there to. he knows what them 2 top ripper rams are for. its amazing how many so called top gun operators dunno what there for or what they do.

[@jdig1984]

I see dozers in the UK backblading the whole time as long as your not digging in and it's alight glide over pass to fill in a low spot say. I don't see a problem

[@mohammedmena749]

I am addicted to those machines.I have a love relation with watching them. I wish I could have one.my land of the field isn't straight

[@HamaAlinzo]

I love Cat D11T Awesome video and thanks for uploading, man

[@MachineCambodia]

Me too, CAT is amazing

[@TurboBMRProjectLove]

crazy how it stills slips even with 250klbs+ of steel on those tracks

[@SavonaEquipment]

We recently reconditioned a D3. These are greta machines.

[@pushysix]

damn that's a sexy dozer, i have ran many 11's but never the new T series. is it just me or does that blade look like it should be a bit bigger?

[@faithingod9554]

That earthmover was like one of those kids trying to show off in front of the camera lol

[@gamze1281]

2790526097537

[@f150bc]

Its a D 11 and its doing a great job ripping.The operator knows his stuff.

[@ippielb]

Nice machine, how many hours are on it in the video? Looks to be fairly low, under 200 i'm assuming by how much paint is still left on everything.

[@TheIrongutz]

Best dozer built, period!

[@LYEARTHMOVERS]

Excellent dozer awesome video!!!!

[@geraldoduarte5311]

adoro máquinas! ! ! trabalhei muitos anos operando máquinas diversas ....

[@redtussock]

:-) Thought you had it on steroids ... then I saw the two shanks after the first pull ... awesome stuff. Thanks for the upload.. the clack clack clack is a great sound to get a guy to go to sleep at night ... :-)

[@pablovega7979]

no noise inside cab

[@JH-nf4xd]

Over 2 million views and less than 2,000 likes. Where' the love button?

[@cnote4461]

I'm confused - why does he rip the soil - then back up, lower the blade and smooth out what he ripped?

[@43mccoy]

" WallMart's " Dozer is Very Impressive ..... lucky operator !

[@gilbertclement5427]

Wow D11T and ancient scraper with open cab.

[@carlosruizcaggiati6881]

Excelente videos me encantas las voladoras Caterpillar, son geniales

[@TheJasoni5567]

I cant help it, I have to say something. Dont ever back drag, I considered you point about rocks, tires are expensive but starting at 4:55 I noticed the machine tracking all the way to the way forward and dragging the blade all the way back and then going forward again. You could skim the surface forward to clear all the rocks in half the time and half the undercarriage wear.

[@LYEARTHMOVERS]

Very cleaver and experienced operator!!!

[@davehager1981]

LY ENGINEERING EARTH MOVERS i

[@checkmate440]

I can remember when the blades and rippers were made in Joliet.Nowdays made in Mexico .

[@xXxM4A1xXx08]

I remember back when the Cat Plant was back by the old Youth prisons and not out on route 6

[@checkmate440]

xXxM4A1xXx08 That Cat plant was built in 1970 and the one on 6 was built in 55 I believe.

[@xXxM4A1xXx08]

Plymouth roadrunner Oh wow, guess I never paid to much attention when we would be out on Route 6 thanks for the info

[@checkmate440]

Plymouth roadrunner F building 1970 Rt.6 around 55 correct.

[@xXxM4A1xXx08]

More closer to I-80 but not by much

[@horaciocastillo1435]

Thanks for this enjoyable video,somehow I have always been in love with dozers for what they do. Have a question for anyone, what causes that clanking sound on the undercarriage of this dozers. When I was a kid ny dad had an old D4 and I do not recall having this sound. I do remember it had an auxiliary gas engine to start the diesel engine of the dozer and at times it was a pain to start this gas engine. Thanks

[@pasqualeemanuele7888]

O

[@billmoran3812]

The clanking sound is the grousers as they turn over the drive sprocket. There is a small amount of play in the track pins so as the grouser turns over I’d moved enough to creat the clank sound. That’s a normal sound. If the track is too tight or if the pins are rusted, you won’t hear it.

[@howiewentworth4589]

I operated a komatso 135 with ripper , also tri-axle they have a lot more power than your standered track cat and I used it for a winter and I didn't want go back to the old girl at shop.

[@rwbnatureadventure3876]

He is ripping it and backblading it so the earth movers can load easy and not run over boulders

[@xXxkolinkl]

Dat`s right!!

[@sashadala346]

This guy just start operating yesterday? The Frame of the Ripper is not a Wear Part. Lift up the ripper, please, and rip with the ripper shank, the way it's supposed to be done, and not with the frame! Then shift down 1 gear for ripping. That's way easier on the machine.

[@thebosscatman7]

That's Jimmy sukut running that it was brand new after that job it went on rental and I ran it for about 8 months it sure was a nice machine I think it cost just over 2 million but we traded 2 old peace's of crap in and got a fortune for them thanks to the repower program the tax payers paid for most of that D11T..

[@Vetster350]

awsome advise...operate small time excavators...wish I was there...

[@yamaharidr450]

if i only had one day to live i would spend it on one of these

[@ghall1964]

Right there is about all that ripper is good for. Hard packed dirt or slate and that's it .

[@rcallan]

Awesome video. Thanks.

[@troymetcalf3639]

My brother from Texas he did all that Tom he works on a pipeline now he was in the southern part of Illinois heading down to Texas I suppose

[@Dozervideo]

Nice video, thanks 👍👍

[@Gavin84w]

Yeah baby!! I have a a brand new one in the shop getting prepped for one of my customers right now, good to see some proper action vids from you to mate and i agree frontrow with what you say although it is pretty creamy going at that point.but he would not be giving the GET salesman any unwanted sales of boots

[@abdullahbayndr3455]

.

[@JMAC-rs6ey]

Most people ask me how long I been running a dozer. My answer 41 years. Thanks for watching and ur support

[@gangsteroflove05]

love them cat dozers n john deere...

[@ابومسفر-ف8ج]

انا أعشق المعدات الثقيلة. وبالاخص البلدوزر واحلم ان امتلك واحد

[@stevehorne10000]

When I took delivery of a new 977k track loader Cat gave , me the operator a full set of 1/2" drive sockets, a cat watch fob, hat and Belt buckle, what does the operator get today?

[@LYEARTHMOVERS]

Does this soil really needs to be ripped?

[@midwesthall]

I so remember chatting with a ""Miss Samuel @ TRACK MAC ENGINEERING A few years back and the damn woman told me it is not that big.We have one down here @ MAYO quary (TCL) Limited. What she talking about??? Damn machine is a monster!!!

[@cleberbambolin7062]

muito legal !!!! muito bom!!!!

[@adamhenry5791]

Looks like Irvine

[@godbluffvdgg]

That soil, in So Cal, is like concrete, I bet the water trucks dumped a LOT of water before that ripper would penetrate...

[@engingenisel3661]

Bu tür videoları seviyorum 🇹🇷 Türkiye den selamlar

[@denominator208]

I need to dig a hole to build a little cottage, should I buy one of these??

[@formu1fan]

Where is this project? Is it by any chance on the east side of the 133 just south of the 405? It kinda looks like that area.

[@claudemirpatroleiro]

excellent job 👏🏼👏🏼👏🏼👏🏼 hug 🤝👍

[@flash51050]

I love it just up my street

[@machinesworldwide6472]

I Like Video

[@MayySterr]

How much fuel does it need to 1 hour working ?

[@efrenhernandez2134]

No,no,no!. The ripper frame should never hit the ground if it can be avoided.

[@Dodgeoffroadfreak]

do the tracks ever come off on accident?

[@rollingstopp]

IT HAS ITS OWN ZIPCODE

[@R54UTO]

very nice video,thnx for uploading. soon i will upload video of mine d11r.

[@jvliomarquez720]

por mas que quede mejor omas lindo ala vista jamas se deve nivelar un terreno hacia atras

[@dragi21105]

My favorite

[@jozzie2000]

she is a sweetheart

[@josecarlosmendesdesouzamen6536]

Aí sim viu ,isso é qui é máquina !!

[@ass.formaciones]

Las mejores máquinas en movimiento de tierra, ayudan al progreso y contrucción de nuevas ciudades

[@dimitrisgeorgiou8698]

i love trucks and bulldozers

[@Gacekspojler]

what a monster :)

[@todlindley8101]

Nice piece o kit !!, Great cranked muffler group

[@roberthenderson4466]

WHERE IN SOCAL ARE YOU DEVELOPING ? I WAS IN CARSON CLOSE TO THE NEW SHOPPING CENTER GOING UP.

[@richardpersoage8504]

Wow! Talk about torque.

[@The_blindpizzaguy1300]

Bruder toys just came out with the model of this thing and it's 1/16 scale which means it is a monster toy check it out!

[@The_blindpizzaguy1300]

The only real difference is the toy model that I have has a single shank ripperand you know I'm hoping that one day and operator will be nice enough to let me go up to the actual bulldozer and touch it if it is on site somewhere

[@dirtmonkey_14h2]

Why not become an operator if it's such a passion of your's? If you can afford 1/16 scale models you can afford operator training. Finding a job is relatively easy.

[@The_blindpizzaguy1300]

Well I totally would love to be an operator but there's just one thing standing in my way I do not know very many construction companies that would hire a totally blind bulldozer operatorso it looks like 1/16 scale models is my way of operating 1/16 scale models aren't really all that expensive this bulldozer in the 1/16 scale model is just over $100and I say just over because of sales taxbut I don't have any of those really really really expensive remote control models that you see on most KZbin videosi'm happy with hand-operated high grade plasticwhich is what bees 1/16 scale models are

[@dirtmonkey_14h2]

Ahhh i see! Sorry bout that and yes i thought you had the expensive as hell hydraulic electric ones hahaha

[@The_blindpizzaguy1300]

That's cool dudeI probably would've thought the same thing if I was looking at this comment and I did not know the toy company on my channel I do a lot of videos about my toy construction fleet how I have it set up is the figures operate the vehicles and I'm just sort of the guy that pushes them along and checks to make sure everything is going good I have so many vehicles that a lot of my figures have to know how to operate multiple vehicleslike say for example the figure who operates my D11 also operates my CB34 road roller

[@mrbluenun]

What is the dozer dragging, young sand-stone?

[@ronymaurel6336]

toda una bestia 😍

[@fsmanforlife]

Is there a float on the d11 blade cus he is back dragging nice a ns smooth

[@salahmohamed2037]

quel amemioration ajoute? par rapport d 10t et c est quoi son moteur? c32?

[@dannysecret8068]

WOW that was boring

[@The_blindpizzaguy1300]

How?

[@mobilephone9524]

Alex Williamson'sadventures ซ้ายชมสินค้าที่

[@calaverex]

great video

[@jamesbradley1695]

I hope they checked for archaeological remains before using that ripper!

[@rampage3337]

***** no no dont fuck that dude ofc they looked for archaelogical remains. they digged up all the oil so they can fuel that bad boy xD

[@rampage3337]

***** no no dont fuck that dude ofc they looked for archaelogical remains. they digged up all the oil so they can fuel that bad boy xD

[@badlandskid]

No. Proper method is to sink the rippers in and pull a trench. Then when you back blade you look for pieces of bone and such. That's the best way.

[@MachineCambodia]

Amazing dozer

[@ربيارحمأبيه]

❤لا اله الا الله ❤ اللهم اغفرﻷبي وارحمه 💔💔💔💔💔💔💔

[@carmineapostolico7846]

Grande forza, bella e unica

[@يَزَنْمُحَمَدعَبْدالرَشِيِ-ث1د]

لا مكان للشحاذة الالكترونية اذهب الى مكان آخر .