Actually, the cat with the knife type cutting attachment is very very minimal roughness on it, no more then pushing hard ground. Remember that dozens are meant to to push forward so that really only puts the most strain on the track frame. Just as long as the operator doesn't try and turn hard with the final drives, it is good to go, and another big plus instead of a stump splitter is your looking forward during the removal, not straining your neck to line up the splitter, which can be very very hard on the final drives, track slap and undercarrige.
@bonniedobkin69482 жыл бұрын
Great VIDJA ! Absolutely Fabulous Welder on your Sara’s Truck , same one we Run Trailblazer 302 AirPak , ❤️🏴☠️🎥💯%👍🏻🇺🇸 👌
@maximumhardcore43622 жыл бұрын
Same!!!
@BuildALotAcres2 жыл бұрын
I've never seen a stump ripper like that. Pretty cool. I did a video on my friends Nye stump shear for his excavator. Quite an impressive implement.
@UltraMagaFan7 ай бұрын
Look up a Savannah V-Blade. This little KG blade aint shit. It's not that impressive.
@raymondquave28439 ай бұрын
A kg is rough on that left side of undercarrage,, I use a center mount fleco stump block with a splitter attached to it all force is distributed to center of machine
@BRIANS_FIRE6 ай бұрын
That's funny. Just met this fella today
@brian_2040 Жыл бұрын
A operator can make or break a rake man with a KG blade. Pushing big holes in a swampy area. Ill never forget the experience I had. Several loads of dirty wood and stumps had to be hauled off. With more time i could have separated dirt out,but we were crunched for time. Take care of your operators, not saying you don't, just saying.
@billhickman48262 жыл бұрын
Cool operation. I would think that would be ruff on equipment.
@esquad54062 жыл бұрын
It does tend the ware the bushings on one side.
@alanhumphries12082 жыл бұрын
those kg blades are a lot of fun - made some fire breaks with one on a dresser td-25
@raymondquave28432 жыл бұрын
The D 6 is to light , the K G blade is not meant to push an split stumps , but use what u got the ideal stumper is a fleco stump block with a bigger heaver splitter on the side pushed a million stumps with a D 7 with one
@olivergrading28852 жыл бұрын
Works great! Good purchase buddy.
@kenoliver63372 жыл бұрын
I made lots of parts for kg blades at my old job
@Keith-fk5wh Жыл бұрын
lol, after the 2nd attempt on that one stump I wold have put the stinger in play to section it out. Yes I have ran dozers in NC with rakes and KG blades, mostly rakes I'll admit but still, if the first two tries don's take it out you break it into pieces with the stinger.My dad was the clearing forman for a really large farm there in the 6o's and early 70"s btw.
@winneswood13352 жыл бұрын
Looking Good Old Boy!!
@scottmcquarrie72952 жыл бұрын
To tell you the truth, I don't believe that blade is a very good investment or viable option for pulling stumps. Especially with the spear mounted on one side of the blade. All the old timers by me use their D8's or D9's with a single shank ripper with the shank mounted backwards, facing rearward. Back up to the stump, drop thank shank underneath it and reverse and raise the ripper and you pop stumps out like pimples. One guy here uses a 983B with a ripper and a rake/grapple bucket and it's a one machine clearing force.
@robertheinkel62252 жыл бұрын
Looks pretty effective.
@moms7622 жыл бұрын
So really, if you just split the stump, that will allow you to get it out much easier is what I’m seeing.?
@chrisbubba6000 Жыл бұрын
I've cleared alot of land with a d6d an a rome kg blade a d6 will handle a kg with no problem around eastern part of nc 7 0r 8 where way to heavy they stay stuck all day
@rickcinway23125 ай бұрын
Is there a way to shake out the soil that gets caught and piled up with debris? So, the minimum amount of top soil is lost when the root/brush pile gets burned or left to rot.
@buddyharrington7050 Жыл бұрын
Picking up the blade pushing against the stump is a real no no he will find out soon enough when he breaks the dozer frame into.
@r.l.18912 жыл бұрын
I didn't know Kevin Garnett had his own dozer blade....
@angus1868 ай бұрын
Would a trackhoe not be faster?
@markwhite43502 жыл бұрын
Hey, do me a favor, park your truck right behind me so it really restricts me moving this dozer. Oh, and leave your door open so your truck takes up even more of the roadway. Thanks....
@allterrainlandclearingandb81812 жыл бұрын
Nice work, what truck bed is that on the service truck?
@oldtimerf76022 жыл бұрын
He will not reply. He never replies.
@MarkSmith-on5gg2 жыл бұрын
I think I could do better with a semi u blade lots of dirt in the piles
@adannoyola92602 жыл бұрын
What does KG stand for?
@crandonborth2 жыл бұрын
Kilogram 🤣🤣🤣
@HelloRenauldo2 жыл бұрын
Need a hand? I’m in Sanford.
@danvertdavis68672 жыл бұрын
Kg's suck....excavator with stump shear walk circles around it
@dlogan30042 жыл бұрын
Sure, but let’s race to the next stump…….
@danvertdavis68672 жыл бұрын
Cat 365 sure!
@frontagulus2 жыл бұрын
They don't suck - he's using what he has and it's getting the job done. I'm sure if he had an excavator with stump shear he might use that on this job
@dlogan30042 жыл бұрын
@@danvertdavis6867 a 365 for clearing and grubbing? You must for for a huge company on some massive projects. If I get a Deere 350 and a D6 to clear with I’m happy as can be. I usually get a 250g and a open cab 450 dozer lol
@danvertdavis68672 жыл бұрын
@@dlogan3004 hahaha indeed!
@daleolson35062 жыл бұрын
The music junked another video 👎👎👎👎💩💩💩😬
@d5ncat2279 ай бұрын
If you want to destroy a dozer put a k g blade on it