CATIA Training Course Exercises for Beginners - 2 | CATIA Sketcher Drawings

[@cryptoboss3511]

Great work you are saving almost all the money from.wasting on spending in institute. Thank you

[@madhulatha65]

Thanks for class , explination is very clear. thanks a lot

[@CADCAMTutorials]

You're welcome 😊. Please subscribe to get new video notification and please like and share this video.

[@bernadusarswendo1046]

instead of using eraser for the big circle, you can use break point then the other side you can make it as construction line. so the line will keep on green

[@unexplorednature123]

Right 👍

[@ksdnsdkumar1375]

Excellent easy tutorial.....

[@michaelp4024]

It looks like you accidentally deleted your R83 circle when trimming. I also think that was supposed to be tangent with the lower-left outer circle rather than the lower right outer circle. I had to zoom in as much as I could to properly trim the redundant part as to not accidentally remove the largest circle.

[@armandmatossian2081]

So I see you used a lot of construction geometry. Is it not possible to create horizontal and vertical constraints between circles and define their origin distances? I'm having a really hard time creating vertical and horizontal relations between arcs

[@nowwin5107]

Great work sir

[@vaibhavpatil4616]

Sir why circle dia is changing...While doing tangency

[@--SurajVerma-000]

Why the object has two different colour lines, white and green. Is it like underdefined or something else?.

[@arvindswamy131]

thank you sir

[@syedrauf258]

Thank you sir ❤

[@user-ef4tk4wy3y]

There is a white line it not fully constraint

[@deepakpatil823]

Sirr , Why we enable hybrid mode and not others , at the starting of sketch ???

[@siemenscadsolutions9994]

You can use surface and part model workbench in one part itself with help of Hybrid model enable button

[@tejasb9670]

Thank you! :)

[@muratsuslu8200]

hocam skech analizi yaptığımızda açık kenarlar var ise nasıl kapatabiliriz ?

[@muratsuslu8200]

Sir, if there are open edges when we do sketch analysis, how can we close them?

[@scordiocraft3075]

nice but was bad example i mean the diameters of some circles doesn't match well

[@dfghj_lu5qh]

Sir why the bigger circle of 83 is not constrained

[@cieloayjariluna8780]

Why is always green??? Mine just maintains white

[@said.skopal]

Thank you a lot pal,this help

[@explorewithshubham0007]

Sir, why that one line is in white colour and others are in green. Overall drawing should be in green color and iso constraint

[@rachelmikealson2511]

White line must be under constrained

[@akshaykokate5778]

Really good one

[@Cookie_handler]

Are bhai last part ka constrain nhi hua yrr

[@roronoazoro9228]

thank you

[@CADCAMTutorials]

You're welcome 😊

[@ajaydoijode3494]

Sir if I tangent the two circle it will moving outside. It's doesn't working

[@ashishrchandekar9286]

Sir how to hatch the middle part in sketch mode

[@siemenscadsolutions9994]

You have to select the fill option and there you have 3 options to select the Boundary use the magnet/magic profile selector and try .Make sure ur boundaries are fully closed

[@somsubhradanda4348]

Facing problem due to under defined sketch even after proper dimension the relations are creating problem for me

[@dipeshsawant271]

How to get 2D sketch on pdf file plz tell us...

[@dishankshah5080]

Make more examples on CATIA

[@CADCAMTutorials]

CATIA Exercises for Beginners with Solutions: kzbin.info/aero/PLrOFa8sDv6jfO7prGvhhtMd3VojnElj6F

[@pranaydurvesula5891]

total sketch must be in green colour right

[@dfghj_lu5qh]

But at last it is not green colour

[@dfghj_lu5qh]

Why

[@ramprakash776]

In my sketcher drawing is not able to get constraint. tell me the settings option.

[@siemenscadsolutions9994]

Your constrain visibility mode is not activated so only your facing this issue at the bottom window you can see the Dimension constraints option enable it

[@guganvenkatesan2810]

Its there any option to make the circles are equal diameter

[@siemenscadsolutions9994]

Yes we have that option Select the circle diameter dimension and click equal so that if you update one circle dimension it update others

[@hemanthKancham]

Can't PAD it ..It is showing opened circles

[@gautamjiiii]

When i use coincidency the lines are not coinciding, what can i do

[@siemenscadsolutions9994]

Try to select the points of the line

[@crazychemistry2217]

Sir still it incomplete

[@ExplorerKrishna2718]

What is the name of this part

[@legendarycelticspackersfan1528]

my tangency doesnt work properly i get too many reds

[@mohammadmamunpathan8557]

tangency didnt work perfectly like yours ... tried but cant fix

[@1StepaTHC]

Tools/Options/Mechanical Design/Sketcher you need to check on the box Create geometrical constraints

[@AK--dy7zr]

@@1StepaTHC and click on dimension constraints

[@akhilarks6196]

What isvthe object name

[@prafullghadge2833]

Tangent line was pending to draw

[@saurabhgangawane843]

Sir object colour is white it is not correct 🙂✌️

[@jeevangowda7571]

Three circle radius is 28 y did u take 14 for other two?

[@gowtham6277]

inner circle radius is 14 and outer circle radius is 28. hope you'd get it

[@no_name_magician]

@@gowtham6277 All outer circle are have 27 radius and all inner circles have 28 dia.

[@siddhantbhat7309]

It is not geometric constraints, I have used same procedure and it's not constraints

[@vanathip2644]

Catia want more videos

[@CADCAMTutorials]

CATIA V5 Tutorials for Beginners: kzbin.info/aero/PLrOFa8sDv6jcZHbxvT1QVjpiFEEwfW5C1

[@amazingknowledge1017]

@@CADCAMTutorials sir I want to ask one thing... Can u help me

[@rishibagal8348]

Sketch is under constrained

[@jaytwitter1907]

Side line Missing

[@Wade_Xf]

It's looks like💀

[@HemantSinha-q1q]

Thank you sir