When adding dimensions, how are you able to select an edge? I need to rotate model and select faces. Maybe a setting in options?
@krzysztofgad36623 жыл бұрын
You should be able to select the edge without any problems, unless you want to select the wall, it is better to rotate the model so that you can click the wall but you should have no problem with dimensioning.
@1bhamze3 жыл бұрын
@@krzysztofgad3662 thank you!
@write2sijovarghese7 жыл бұрын
Amazing tutorials :D
@mo0001382 жыл бұрын
Great
@write2sijovarghese7 жыл бұрын
Nice work :)
@13D00_7 жыл бұрын
amazing!! how do you rotate the object in such a smooth way??
@krzysztofgad36627 жыл бұрын
Ido Telio I use the 3D mouse to move a part, something like this: www.3dconnexion.com/products/spacemouse/spacenavigator.html
@13D00_7 жыл бұрын
Krzysztof Gad wow damn looks amazing!! Just a little out of my pricerange as Im only a second year Aeronautical Engineering student haha, maybe later
@M4573RMND7 жыл бұрын
Mr. Krzysztof, I have watched a lot of your Catia videos and the majority of them are really well done but this one is confusing me. You know how to use the Tolerancing Advisor so why wouldn't you use it to create the Feature Control Frames?? The feature control frames you have created are non-semantic and are considered "dead" or "dumb" frames. You have not covered semantic Basic dimensioning either. All the You Tube videos I have watched in regards to this workbench are all missing this. Regardless thanks for your videos. I have learned a lot of things from your videos. Keep up the good work.
@TheYoussuf8 жыл бұрын
Merci bcp c'est interessant
@thilacerdabertino8 жыл бұрын
Hello, What is the version of this Catia V5? There is a option to break the line in your video that in the Catia R19 haven't. =( Can you clarify this information, please? Tks in advanced
@krzysztofgad36628 жыл бұрын
In this video is R25 version, thanks for the question, I will try to make up descriptions.
@thilacerdabertino8 жыл бұрын
Tks Krzystof =D
@williamdouglasdemorais43774 жыл бұрын
What's the font, style, size, spacing?
@krzysztofgad36624 жыл бұрын
I think these are standard font settings: font 'sss2', size '3,5' spacing '0', style '?'
@vishaldhalla157 жыл бұрын
Hi there, I noticed that the 2d drawing does not require updating after you create your views. I followed similar steps as in the video, however my 2d drawing requires an update, and removes all of the dimensions from the other views. Any suggestions, please and thank you!
@krzysztofgad36627 жыл бұрын
Hi, i don't have any clue why the dimensions disappear. Do you add a view to do drawing using the command 'View From 3D'? Maybe after updating the view when the dimensions disappear, delete the view and add it again. Go to Tools > Options > Mechanical Design > Drafting > View tab and make sure that Exact preview for view generation is selected as the view generation mode in the View Generation
@vishaldhalla157 жыл бұрын
Hi there, thanks for the reply. But yes, I generate the view from 3D. Every time I click 'display view' in the FTA workbench, and go back to my drawing, I see that an update is required. As soon as I update, all of the dimensions on the view go to 'no show' and are in the hidden plane. So whatever is visually seen on the FTA workbench in terms of dimensions is what I see in the 2D drawing. Any ideas?
@vievidsamc6076 жыл бұрын
How do you mark the Angle please? like if i would like to mark some place as 15°or 30°
@krzysztofgad36626 жыл бұрын
for something like this, you mean how to do it? drive.google.com/drive/folders/1WkKfoPCP9HlNFSW1d9hx3qRrVIacaGDb?usp=sharing
@vievidsamc6076 жыл бұрын
Yes! Thanks for reply. I wanted to do this. But there is weird of my software (I am not sure if I have to set something for it. ) May I ask you to check my problem: kzbin.info/www/bejne/n5iVgmmFrdlga5Y the Part step file: drive.google.com/open?id=17nzc_ChXrhjToi8o7hvJBN0BwbLvAJIE
@omarbelg5998 жыл бұрын
Hello how can i choose my annotations ?
@karthikbhupathy45982 жыл бұрын
CAPTURES NOT EXPLAINED :( ?
@kamaleshkumargoud3444 Жыл бұрын
Yes man
@thilacerdabertino8 жыл бұрын
About FTA, is it possible to create a explode view and use it into the FTA MODE? Tks in advanced
@krzysztofgad36628 жыл бұрын
Sorry for the delay, from what I know so it is possible to create an exploded view of the assembly and use it into FTA, but to make the annotations in the FTA you must be single part not in the assembly, like this video: kzbin.info/www/bejne/o6GQnqZsgaZ8gpI I don't know if my answer can help you. You maybe have found a solution to this?
@thilacerdabertino8 жыл бұрын
Hello Krzysztof Gad, the link that you sent me was about skeleton. Do you know if in Catia r25 has the option overload parts? this funtion works to put in hidden some parts in a determined view. Tks in advanced Krzysztof Gad
@kumarstarz77328 жыл бұрын
Hi... is there anyway that i can learn FTA, i mean am able to do what you are doing by seeing in youtube, but is there anyway that i can learn the FTA in detail like why we have to annotate or why we have to take +0.1 and -0.1 or you kept M42 x 1,5 6 or why you kept M in a circle or somethings like, Is there any way i can learn complete FTA,,,,, Am a beginner,,,,,, just know sketcher, drafting, assembly, part design,, i want to learn complte catia,,, thanks in advance.......